Altronix MAXIMAL77F Maximal F Series Dual Power Samar da Wutar Lantarki Jagoran Shigar Masu Sarrafa Wuta

MaximalF Masu Kula da Wutar Lantarki suna rarrabawa da canza wuta don samun damar tsarin sarrafawa da na'urorin haɗi. Suna juyar da shigarwar 120VAC 60Hz zuwa goma sha shida (16) sarrafa abubuwan da aka kare 12VDC ko 24VDC. Ana iya canza waɗannan fitilun-Safe/Fail-Secure ikon wutar lantarki zuwa busassun lambobi "C". Ana kunna abubuwan da aka fitar ta hanyar buɗaɗɗen ruwa mai tattarawa ko kuma a buɗe (NO) busassun shigar da busassun shigarwa daga Tsarin Kula da Maɓalli, Maɓalli, Maɓallin turawa, REX PIR, da sauransu. Raka'a za su tura wutar lantarki zuwa nau'ikan na'urori masu sarrafa dama da suka haɗa da: Mag Locks , Harin Wutar Lantarki, Masu riƙe da Ƙofa na Magnetic, da sauransu. Fannin FACP yana ba da damar gaggawar gaggawa, Kula da ƙararrawa, ko ana iya amfani da su don kunna wasu na'urori masu taimako. Siffar cire haɗin ƙararrawar wuta ana iya zaɓa ɗaya ɗaya don kowane ko duka na sha shida (16). Duk kayan haɗin haɗin gwiwa dole ne su kasance UL Jerin.

Jadawalin Kanfigareshan Tsarin MaximalF

Lambar Model Altronix	120VAC 60 Hz Input (a halin yanzu)	Ƙididdiga Fuse na Hukumar Samar da Wuta	Ƙimar Ƙarƙashin Ƙarƙashin Ƙarƙashin Batir	Fitowar DC mai ƙima Voltage Zabuka								Matsakaicin Kayayyakin Yanzu don Main da Aux. Abubuwan da aka fitar (Samar da Wutar Lantarki 1 / Wutar Lantarki 2), (A)	Abubuwan da aka Kare Fuse	ACM8 Input Fuse Rating	ACM8 Fitar Fuse Rating
				Samar da Wutar Lantarki 1				Samar da Wutar Lantarki 2
				[DC]		[AUX]		[DC]		[AUX]
				12VDC Fitar Range (V)	24VDC Fitar Range (V)	12VDC Fitar Range (V)	24VDC Fitar Range (V)	12VDC Fitar Range (V)	24VDC Fitar Range (V)	12VDC Fitar Range (V)	24VDC Fitar Range (V)
Mafi qarancin 11F	7A	5A/ 250V	7.5A/ 32V	eFlow4NB				eFlow4NB				-	16*	10A/ 250V	3.5A/ 250V
				10.1- 13.2	-	10.05- 13.2	-	10.1- 13.2	-	10.05- 13.2	-	3.3A + 3.3 A
				10.1- 13.2	-	10.05- 13.2	-	-	20.28- 26.4	-	20.2- 26.4	3.3A + 3.6 A
				-	20.28- 26.4	-	20.2- 26.4	-	20.28- 26.4	-	20.2- 26.4	3.6A + 3.6 A
Mafi qarancin 33F	7A	5A/ 250V	10A/ 32V	eFlow6NB				eFlow6NB				-	16	10A/ 250V	3.5A/ 250V
				10.0- 13.2	-	10.03- 13.2	-	10.0- 13.2	-	10.03- 13.2	-	5.3A + 5.3 A
				10.0- 13.2	-	10.03- 13.2	-	-	20.19- 26.4	-	20.19- 26.4	5.3A + 5.6 A
				-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	5.6A + 5.6 A
Mafi qarancin 55F	7A	5A/ 250V	15A/ 32V	eFlow102NB				eFlow102NB				9.3A + 9.3 A	16	10A/ 250V	3.5A/ 250V
				10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-
Mafi qarancin 75F	8A	5A/250V (eFlow102NB) 6.3A/250V (eFlow104NB)	15A/ 32V	eFlow102NB				eFlow104NB				9.3A + 9.6 A	16	10A/ 250V	3.5A/ 250V
				10.03- 13.2	-	10.03- 13.2	-	-	20.17- 26.4	-	20.28- 26.4
Mafi qarancin 77F	9A	6.3A/250V	15A/ 32V	eFlow104NB				eFlow104NB				9.6A + 9.6 A	16	10A/ 250V	3.5A/ 250V
				-	20.17- 26.4	-	20.28- 26.4	-	20.17- 26.4	-	20.28- 26.4

Matsakaicin 11F kawai: An ƙirƙira wannan rukunin azaman Matsayin Class 2-Iyakantan Wuta shi kaɗai mai samar da wutar lantarki tare da baturin jiran aiki kuma ya dace da wutar lantarki: firikwensin, da na'urorin lantarki (misali bugun ƙofar lantarki).

Maximal33F, Maximal55F, Maximal75F da Maximal77F: Fitowar DC na waɗannan kayan wuta ba ta da iyaka. Idan ana buƙatar fitarwa mai iyaka a cikin aikace-aikacen samfur na ƙarshe, fitarwar DC daga wutar lantarki dole ne a haɗa shi zuwa naúrar da aka jera ta keɓance ko allon kayan haɗi wanda ke samar da iyakantaccen fitarwa. Samfura(s) da ke samar da fitarwa (s) mai iyakacin iko dole ne a jera su daidai da takamaiman aikace-aikacen samfurin ƙarshen kuma a yi wa waya daidai da umarnin shigarwa na samfuran. Hanyoyin wayoyi na aji 1, rabuwa da da'irori, da ingantattun wuraren da aka ƙididdige wuta duk dole ne a yi la'akari da su yayin haɗa kayan aikin DC na wutar lantarki zuwa na'urorin samfur na ƙarshe. Abubuwan taimako na waɗannan raka'a suna da iyaka.

Jerin Hukumar

Jerin UL don shigarwar Amurka

UL 294* - UL An jera shi don Rukunin Tsarin Gudanar da Samun damar.
*ANSI/UL 294 7th Ed. Matakan Ayyukan Gudanar da Samun damar:
Harin Lalacewa - I; Jimiri - I; Tsaron layi - I; Ƙarfin Tsaya - II, III, IV.
Jerin UL don Shigarwa na Kanada:
ULC-S319-05 - Kayan aiki na Class I na Tsarin Samun Lantarki
CSA C22.2 No.205 - Kayan Aikin Sigina.
ULC-S319-05 Tsarin Kula da Samun Wutar Lantarki za a lalace ta hanyar amfani da kowane ƙari, faɗaɗawa, ƙwaƙwalwar ajiya ko wani ƙirar ƙira ta masana'anta ko wasu masana'anta.

Siffofin MaximalF

Modulolin Mai Kula da Wutar Lantarki ACM8:

Goma sha shida (16) suna jawo abubuwan sarrafawa da kansu. Zaɓuɓɓukan fitarwa:
a) Goma sha shida (16) Fail-Safe tace wutar lantarki.
b) Sha shida (16) Fail-Secure tace wutar lantarki.
c) Goma sha shida (16) suna samar da abubuwan fitarwa na “C” (ƙididdigar @ 5A/28VDC ko VAC).
d) Duk wani hade na sama.

Goma sha shida (16) Shigar da tsarin sarrafawa yana jawo abubuwan shiga. Zaɓuɓɓukan shigar da kunnawa:
a) Goma sha shida (16) na buɗewa (NO) busassun abubuwan shigar da busassun abubuwa.
b) Sha shida (16) abubuwan shigar masu tarawa.
c) Duk wani hade na sama.
Goma sha shida (16) tace aux. abubuwan wuta (ana kimanta abubuwan da aka fitar @ 2.5A).

LEDs ja akan allon ACM8 suna nuna fitowar mutum ɗaya ta jawo (ƙarfafa relays).
Cire haɗin ƙararrawa na Wuta (latching ko rashin latching) ana iya zaɓin ɗaiɗaiku don kowane ko duka na takwas (8). Zaɓuɓɓukan shigar da ƙararrawa na Wuta:
a) Buɗewa ta al'ada (NO) ko rufewa (NC) busasshen shigar da busassun.
b) Shigar da juyar da polarity daga da'irar siginar FACP.

Green LED akan allon ACM8 yana nuna cire haɗin FACP.
Fassarar fitarwa ta FACP yana nuna cewa an kunna shigar da FACP (nau'i na "C" lamba @ 1A/28VDC ba a kimanta ta UL ba).

Samar da Wutar Wuta/Caja na eFlow yana ba da iko gama gari don hukumar ACM8 (wayoyin masana'anta) da duk na'urorin sarrafa damar shiga (wiring filin).
Ana kimanta manyan fis ɗin allo na ACM8 @ 10A. Ana kimanta fis ɗin fitarwa @ 3.5A.
Samar da Wutar Wuta/Caji:

Shigarwa: 120VAC, 60Hz.
Don fitarwa voltage da samar da halin yanzu koma zuwa MaximalF jerin Kanfigareshan Chart, shafi. 3.
Class 2 na taimako mai iyakataccen fitarwa mai iyaka @ 1A (ba a kunna ba).
Ƙarfafawatage kariya.
Caja da aka gina a ciki don rufaffiyar gubar acid ko nau'in batura na gel.

Matsakaicin caji na yanzu 1.54A.
Canja atomatik zuwa baturin jiran aiki lokacin da AC ta gaza. Canja wurin zuwa ƙarfin baturi yana nan take ba tare da katsewa ba.
Cire haɗin Ƙararrawar Wuta da ake kulawa (latching ko mara latching) 10K EOL resistor. Yana aiki akan fararwa na yau da kullun (NO) ko rufaffiyar (NC).

AC gaza kulawa (form "C" lambobin sadarwa).
gazawar baturi & kasancewar sa ido (form "C" lambobin sadarwa).
Ƙarfin wutar lantarki. Yana rufe tashoshin fitarwa na DC idan baturi voltage ya faɗi ƙasa 71-73% don raka'a 12V da 70-75% don raka'a 24V (dangane da wutar lantarki). Yana hana zurfafa fitar da baturi.
Don ƙimar fis koma zuwa MaximalF jerin Kanfigareshan Chart, shafi. 3.

Green AC Power LED yana nuna 120VAC yanzu.
Shigar da AC da alamun fitarwa na LED.
Gajeren kewayawa da kariyar wuce gona da iri.
Yakin yana ɗaukar batura har zuwa huɗu (4) 12VDC/12AH.
Girman yadi (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).

Umarnin Shigar MaximalF

Hanyoyin wayoyi za su kasance daidai da Lambar Lantarki ta Ƙasa/NFPA 70/ANSI, Lambar Lantarki ta Kanada, Sashe na I, Sashe na II kuma tare da duk lambobin gida da hukumomi masu iko. An yi nufin samfurin don amfanin cikin gida kawai.

Bayanan Wutar Lantarki LED Diagnostics (shafi na 7)
Gano Ganewar LED Mai Kula da Wutar Lantarki (shafi na 7)
Ƙayyadaddun Takaddun Bayanan Baturi na Hukumar Samar da Wuta (shafi na 7)
Shafi na 8
Samun Gano Tasha Mai Kula da Wuta (shafi 8)
Fitar da Wutar Lantarki Voltage Saituna (shafi na 9)
Hannun Hannun Aikace-aikacen Mai Gudanar da Wuta (shafi na 9)
Zane-zane na Ƙarfafa Ƙwararrun Ƙwararru na FACP/Zaɓi (shafi 12)

Dutsen naúrar a wurin da ake so. Yi alama da ramuka a bango don yin layi tare da manyan rijiyoyin maɓalli uku a cikin shingen. Shigar da manyan haɗe-haɗe guda uku da sukurori a bango tare da ɗumbin kawunan suna fitowa. Sanya manyan rijiyoyin maɓalli na sama sama da sukurori uku na sama, matakin kuma amintattu. Alama matsayi na ƙananan ramuka uku. Cire shingen. Hana ƙananan ramuka kuma shigar da masu ɗaure uku. Sanya ramukan maɓalli na sama sama da sukurori uku na sama. Shigar da ƙananan sukurori guda uku kuma tabbatar da ƙarfafa duk screws (Ƙaƙƙarfan Ƙirar, shafi 15).
Haɗa ƙarfin AC da ba a kunna ba (120VAC 60Hz) zuwa tashoshi masu alama [L, N] (Hoto 3, shafi 10). Green "AC"
LED akan allon samar da wutar lantarki zai kunna. Ana iya ganin wannan hasken ta hanyar ruwan tabarau na LED da ke kofar shingen. Yi amfani da 14 AWG ko mafi girma don duk haɗin wutar lantarki. Amintaccen koren waya yana kaiwa zuwa ƙasa.
Kiyaye iyakataccen wayoyi daban da wayoyi marasa iyaka.
Dole ne a ba da tazara mafi ƙarancin 0.25 (Fig. 3, shafi 10).
HANKALI: Kar a taɓa sassan ƙarfe da aka fallasa. Kashe wutar da'irar reshe kafin shigarwa ko kayan aiki. Babu sassa masu amfani a ciki. Koma shigarwa da hidima ga ƙwararrun ma'aikatan sabis.

Zaɓi fitarwa DC da ake so voltage ta hanyar saita SW1 zuwa matsayi mai dacewa akan allon wutar lantarki (Maximal11F da Maximal33F) (Fig. 1, shafi 9). Maximal55F samar da wutar lantarki an saita masana'anta a 12VDC.
Maximal77F samar da wutar lantarki an saita masana'anta a 24VDC. Maximal75F ya ƙunshi allon samar da wutar lantarki guda ɗaya (1) wanda masana'anta ke saita a 12VDC, da kuma allon samar da wutar lantarki ɗaya (1) wanda masana'anta ke saita a 24VDC.
Auna fitarwa voltage na naúrar kafin haɗa kowane na'ura don tabbatar da aiki mai kyau.
Ba daidai ba ko high voltage zai lalata waɗannan na'urori.

Zaɓuɓɓukan fitarwa (Hoto 2, shafi 9):
Naúrar za ta samar da ko dai guda goma sha shida (16) da aka canza wutar lantarki, sha shida (16) busasshen nau'in "C", ko duk wani haɗin da aka canza da kuma samar da fitowar "C".
(a) Fail-Safe Canja Wutar Wuta:
Don Fail-Safe aiki haɗa ingantaccen shigarwar (+) na na'urorin sarrafa damar shiga zuwa tasha mai alama [NC]. Haɗa shigarwar mara kyau (-) na na'urorin sarrafa damar shiga zuwa tasha mai alama [COM].
(b) Fail-Secure Canja Wutar Wuta:
Don Aiwatar da Amintaccen aiki haɗa ingantaccen shigarwar (+) na na'urorin sarrafawa zuwa tasha
alama [NO]. Haɗa shigarwar mara kyau (-) na na'urorin sarrafa damar shiga zuwa tasha mai alama [COM].
(c) Form "C" abubuwan fitarwa:
Lokacin da ake son fitar da nau'i na "C" dole ne a cire fis ɗin fitarwa daidai (1-8) na kowane kwamiti na ACM8.
Abubuwan Wutar Taimako na ACM8 (ba a kunna ba):
Haɗa na'urorin sarrafa damar shiga waɗanda ke buƙatar iko akai-akai zuwa tashoshi masu alama [C] tabbatacce (+) da [COM] korau (-). Ana iya amfani da abubuwan fitarwa don samar da wuta ga masu karanta kati, faifan maɓalli da sauransu.
Abubuwan Taimako na eFlow (ba a kunna ba):
Don haɗin na'ura mai taimako wannan fitarwa ba zai shafe shi ta Ƙarƙashin Haɗin Wuta ko Ƙararrawar Wuta
Interface. Haɗa na'urar zuwa tashoshi masu alamar [+ AUX -] (Hoto 3, shafi 10).

Zaɓuɓɓukan shigar da ƙara (Hoto 2, shafi 9):
(a) Kullum Buɗe [NO] shigar da fararwa:
Ana kunna abubuwan shigarwa 1-8 ta hanyar buɗewa ko buɗe abubuwan shigar da ruwa mai tarawa. Haɗa abubuwan sarrafa ikon samun dama, faifan maɓalli, maɓallan turawa, REX PIRs, da sauransu zuwa tashoshi masu alama [IN] da [GND].
(b) Buɗe abubuwan shigar da Mai Tari:
Haɗa kwamitin kula da hanyar shiga buɗaɗɗen mai tarawa tabbatacce (+) zuwa tashoshi masu alama [IN] da korau (-) zuwa tashoshi masu alama [GND].
Zaɓuɓɓukan Interface Ƙararrawar Wuta ACM8 (Figs. 5-9, shafi 12):
Rufewar [NC] ko buɗe [NO] da aka saba buɗewa daga rukunin kula da ƙararrawa na wuta ko shigarwar juyar da polarity daga da'irar siginar FACP zai shafi abubuwan da aka zaɓa. Don ba da damar cire haɗin FACP don fitarwa kunna kunna (s) masu dacewa [SW1-SW8] KASHE akan kowane allon ACM8. Don kashe cire haɗin FACP don fitarwa kunna madaidaicin maɓalli (s) [SW1-SW8] ON akan kowane allon ACM8.
(a) Buɗe [NO] yawanci:
Don ƙugiya mara latching koma zuwa Hoto 6, shafi. 12. Domin latching ƙugiya-up koma zuwa siffa 7, shafi. 12.
(b) Akan rufe [NC] shigarwa:
Don ƙugiya mara latching koma zuwa Hoto 8, shafi. 12. Domin latching ƙugiya-up koma zuwa siffa 9, shafi. 12.
(c) FACP Siginar shigar da madauri mai faɗakarwa:
Haɗa tabbataccen (+) da korau (-) daga fitowar sigina na FACP zuwa tashoshi masu alama [+ INP -]. Haɗa FACP EOL zuwa tashoshi masu alamar [+ RET -] (ana magana da polarity a yanayin ƙararrawa). Jumper dake kusa da TRG LED dole ne a yanke (Fig. 6, shafi 12).
FACP Dry form “C” fitarwa (Ba a kimanta ta UL) (Hoto 2b, shafi 9):
FACP form “C” lambobin sadarwa za a iya amfani da su jawo rahoto ko sigina na'urorin. Waɗannan lambobin sadarwa suna canzawa akan shigar da ƙararrawar wuta zuwa allon ACM8.
Haɗin Batir na tsaye (Hoto 3, shafi 10):
Don aikace-aikacen Ikon Samun damar Amurka batura na zaɓi ne. Ana buƙatar batura don shigarwa na Kanada (ULC-S319). Lokacin da ba a yi amfani da batura ba, asarar AC zai haifar da asarar juzu'in fitarwatage. Lokacin da ake son amfani da batura masu aiki, dole ne su zama nau'in gubar acid ko gel. Haɗa baturi zuwa tashoshi masu alama [- BAT +] (Hoto 3, shafi 10). Yi amfani da batura guda biyu (2) 12VDC da aka haɗa a jeri don aikin 24VDC (an haɗa da jagororin baturi). Yi amfani da batura - Casil CL1270 (12V / 7AH), CL12120 (12V / 12AH), CL12400 (12V / 40AH), CL12650 (12V / 65AH) batir ko UL gane batir BAZR2 da BAZR8 na ƙimar da ta dace.
Abubuwan Baturi da Kulawar AC (Hoto 3, shafi 10):
Ana buƙatar haɗa na'urori masu ba da rahoton matsala na kulawa zuwa abubuwan da aka yiwa alama [AC Fail, BAT Fail] na'urorin sa ido mai alamar [NC, C, NO] zuwa na'urorin sanarwar gani da suka dace. Yi amfani da 22 AWG zuwa
18 AWG don gazawar AC & Low/Babu rahoton baturi.
Don jinkirta rahoton AC na sa'o'i 2., saita sauya DIP [AC Jinkiri] zuwa matsayin KASHE (Fig. 3, shafi 10).
Don jinkirta rahoton AC na 1 min., saita sauya DIP [AC Jinkiri] zuwa ON matsayi (Fig. 3, shafi 10).
Cire Haɗin Ƙararrawar Wuta (Hoto 3, shafi 10):
Don kunna Cire Haɗin Ƙararrawar Wuta saita sauya DIP [Rufewa] zuwa Matsayin ON.
Don kashe Ƙararrawar Wuta Cire haɗin yanar gizo saita sauya DIP [Rufewa] zuwa KASHE matsayi.
Shigar da Tamper Switch (Hoto 3a, shafi 10):
Dutsen UL Jerin tamper canza (samfurin Altronix TS112 ko daidai) a saman shingen. zamewa da
tampmadaidaicin madaidaicin madaidaicin zuwa gefen shingen kusan 2” daga gefen dama (Fig. 3a, shafi 10).
Haɗa tampcanza wayoyi zuwa shigar da Panel Control Panel ko na'urar da aka jera UL mai dacewa. Don kunna siginar ƙararrawa buɗe ƙofar kewayen.
Abubuwan shigar da wutar lantarki da yawa (Hoto 2, shafi 9) (Ba a kimanta ta UL ba):
Lokacin amfani da ƙarin Fitar da wutar lantarki ta waje, masu tsalle J1 da J2 waɗanda ke kan allon ACM8 daidai dole ne a yanke (Fig. 2c, shafi 9 & Fig. 5, shafi 12). Haɗa Wutar Wutar Lantarki Mai Iyakan Iyaka ta waje zuwa tashoshi masu alamar [- Control +] (Wadannan tashoshi suna daidaitawa da tashoshi na [- Power +]). Lokacin amfani da kayan wuta na DC, dole ne a lura da polarity. Lokacin amfani da kayan wuta na AC, ba a buƙatar lura da polarity (Fig. 2d, shafi 9.) Duk hanyoyin haɗin yanar gizo dole ne a yi amfani da ma'auni mai dacewa CM ko FPL jaket ɗin waya (ko madaidaicin madaidaicin) (Fig. 4a, shafi 11) .

Kulawa

Ya kamata a gwada naúrar aƙalla sau ɗaya a shekara don aikin da ya dace kamar haka:
Kulawa na FACP: Don tabbatar da haɗin kai daidai da aiki na cire haɗin haɗakar ƙararrawa ta wuta.
Da fatan za a bi hanyar da ta dace a ƙasa:
Yawan Buɗe Shigarwa: Sanya ɗan gajeren lokaci tsakanin tashoshi masu alamar [T] da [+ INP] zai haifar da Cire Haɗin Ƙararrawar Wuta. Cire gajeriyar don sake saitawa.
Shigar da Ake Rufe: Cire waya daga tasha mai alama [INP -] zai haifar da Cire Haɗin Ƙararrawar Wuta. Sauya waya zuwa tasha mai alama [INP -] don sake saitawa.
Shigar da siginar siginar FACP: Wajibi ne don kunna tsarin ƙararrawa na Wuta. A cikin duk yanayin da ke sama koren TRG LED na ACM8s zai haskaka. Duk abubuwan da aka zaɓa don
Cire haɗin ƙararrawar wuta zai kunna na'urorin kullewa.
Lura: Duk abubuwan da aka fitar [OUT 1] - [OUT 8] dole ne su kasance a cikin yanayin al'ada (de-mai kuzari) kafin gwaji. Lokacin da aka saita naúrar don Buɗe Al'ada (Hoto 8, shafi 12) ko Kullum Rufewa (Fig. 10, shafi 12) aiki latching, dole ne a sake saita Haɗin Ƙararrawar Wuta ta kunna maɓallin sake saiti na Kullum Rufe.
Fitarwa Voltage Gwaji: A ƙarƙashin yanayin kaya na yau da kullun, fitowar DC voltage ya kamata a duba don daidai voltage matakin ( koma zuwa MaximalF jerin Kanfigareshan Chart, shafi 3).
Gwajin baturi: A ƙarƙashin yanayin kaya na al'ada duba cewa an cika cajin baturin, duba ƙayyadaddun voltage a tashoshin baturi da kuma tashoshin allon allo masu alamar [+ BAT -] don tabbatar da cewa babu karya a cikin wayoyi masu haɗin baturi.
Lura: Matsakaicin cajin halin yanzu shine 1.54A. Rayuwar baturi da ake tsammani shine shekaru 5; duk da haka, ana bada shawarar canza batura a cikin shekaru 4 ko ƙasa da haka idan ya cancanta.

Bayanan Wutar Lantarki LED Diagnostics:

Ja (DC)	Green (AC/AC1)	Matsayin Samar da Wuta
ON	ON	Yanayin aiki na al'ada.
ON	KASHE	Asarar AC. Baturi na tsaye yana samar da wuta.
KASHE	ON	Babu fitarwa na DC.
KASHE	KASHE	Asarar AC. An cire ko babu baturi mai jiran aiki. Babu fitarwa na DC.

Ja (Jemage)	Matsayin baturi
ON	Yanayin aiki na al'ada.
KASHE	Baturi gazawa/ƙarancin baturi.

Samun damar Mai Kula da Wutar Lantarki LED Diagnostics

LED	ON	KASHE
LED 1-LED 8 (ja)	Relay(s) na fitar da kuzari.	Relay(s) na fitar da kuzari.
Trg (Green)	An kunna shigar da FACP (yanayin ƙararrawa).	FACP na al'ada (yanayin rashin ƙararrawa).

Samun damar Mai Kula da Wutar Lantarki LED Diagnostics

Baturi	Mafi qarancin 11F	Mafi qarancin 33F	Maximal55F, Maximal75F, da Maximal77F
7AH	Minti 30/4A*	Minti 10/6A	Minti 5/10A
12AH	Minti 35/4A*	Minti 30/6A*	Minti 30/10A*
40AH	Sama da Awa 4/4A*	Sama da Awa 4/6A*	Sama da Awa 2/10A*
65AH	Sama da Awa 4/4A*	Sama da Awa 4/6A*	Sama da Awa 4/10A*

Waɗannan saitunan kawai za a iya amfani da su a cikin shigarwar ULC-S319.

Ƙirar Tasha Tashar Tashar Wuta

Labarin Ƙarshe	Aiki/Bayyana
L, G, N	Haɗa 120VAC 60Hz zuwa waɗannan tashoshi: L zuwa zafi, N zuwa tsaka tsaki. Kada a yi amfani da tasha mai alamar [G].
+ DC -	Factory da aka haɗa zuwa allon ACM8.
Ana Kula da Ƙaddamar da EOL	Wuta Ƙararrawa Interface yana jawo shigarwar shigarwa daga gajere ko FACP. Ana iya buɗe abubuwan shigar da ƙara a kullum, yawanci ana rufe su daga da'irar fitarwa ta FACP (shigarwa mai iyaka ta Class 2) (Hoto na 3, shafi na 10).
A'a, Sake saitin GND	FACP interface latching ko mara latching (Class 2-iyakantacce) (Hoto na 3, shafi na 10).
+ AUX-	Ƙarfafawar Class 2 mai iyakataccen fitarwa mai iyaka @ 1A (ba a kunna ba) (Hoto na 3, shafi na 10).
AC FAIL NC, C, NO	Yana nuna asarar wutar AC, misali haɗi zuwa na'ura mai ji ko ƙararrawa. Relay yawanci ana samun kuzari lokacin da wutar AC ta kasance. Ƙimar tuntuɓar 1A @ 30VDC (iyakantacce Class 2) (Fig. 3, pg. 10).
BAT FAIL NC, C, NO	Yana nuna ƙarancin yanayin baturi, misali haɗa zuwa panel ƙararrawa. Relay yawanci yana samun kuzari lokacin da ƙarfin DC ya kasance. Ƙimar lamba 1A @ 30VDC. Ana ba da rahoton cire baturi a cikin mintuna 5. An ba da rahoton sake haɗa baturi a cikin minti 1 (iyakantaccen ƙarfin aji 2) (Fig. 3, shafi. 10).
+ BAT -	Haɗin baturi na tsaye. Matsakaicin caji na yanzu 1.54A (ba iyakacin ƙarfi) (Fig. 3, pg. 10).

Samun Gano Tasha Mai Kula da Wuta

Labarin Ƙarshe	Aiki/Bayyana
- Power +	12VDC ko 24VDC daga wutar lantarki / caja (ma'aikata da aka haɗa). Waɗannan tashoshi suna daidaitawa da tashoshi na [- Control +].
– Sarrafa +	Waɗannan tashoshi suna daidaitawa da tashoshi na [- Power +]. Ana iya haɗa waɗannan tashoshi zuwa Wutar Wutar Lantarki mai iyakance iyakataccen ikon amfani da wutar lantarki don samar da keɓantaccen ikon aiki don na'urori (Ba a kimanta ta UL ba). Dole ne a cire Jumpers J1 da J2.
TARBIYYA 1- INPUT 8 IN, GND	Daga budewa da/ko buɗaɗɗen abubuwan shigar da mai tara kaya (buƙatun fita maɓallan, fita pir's, da sauransu)
FITOWA TA 1- Fitarwa 8 NC, C, NO, COM	12VDC zuwa 24VDC yana jawo abubuwan sarrafawa masu sarrafawa. Matsakaicin nauyi a kowace fitarwa shine 2.5A.
	Maximal11F: P/S 1 – 10.1-13.2VDC @ 3.3AP/S 2 – 10.1-13.2VDC @ 3.3A ko P/S 1 – 20.28-26.4VDC @ 3.6AP/S 2 – 20.28-26.4VAC. P/S 3.6 - 1-10.1VDC @ 13.2A da P/S 3.3 - 2-20.28VDC @ 26.4A.
	Maximal33F: P/S 1 – 10.0-13.2VDC @ 5.3AP/S 2 – 10.0-13.2VDC @ 5.3A ko P/S 1 – 20.28-26.4VDC @ 5.6AP/S 2 – 20.28-26.4VAC. P/S 5.6 - 1-10.0VDC @ 13.2A da P/S 5.3 - 2-20.28VDC @ 26.4A.
	Maximal55F: P/S 1 - 10.03-13.2VDC @ 9.3A da P/S 2 - 10.03-13.2VDC @ 9.3A.
	Maximal75F: P/S 1 - 10.03-13.2VDC @ 9.3A da P/S 2 - 20.17-26.4VDC @ 9.6A.
	Maximal77F: P/S 1 - 20.17-26.4VDC @ 9.6A da P/S 2 - 20.17-26.4VDC @ 9.6A.
	Rashin-Safe [NC tabbatacce (+) & COM Negative (-)], Rashin-Secure [NO tabbatacce (+) & COM Negative (-)], fitarwa na taimako [C tabbatacce (+) & COM Korau (-)] ( Lokacin amfani da wutar lantarki ta AC ba a lura da polarity ba), NC, C, NO tuba zuwa busassun sigar “C” 5A 24VAC/VDC da aka ƙididdige abubuwan busassun lokacin da aka cire fis. Lambobin sadarwa suna nunawa a cikin yanayin da ba a kunna ba.
FACP INTERFACE T, + INPUT -	Wuta Ƙararrawa Interface yana jawo shigarwa daga FACP. Ana iya buɗe abubuwan shigar da ƙara a kullum, yawanci rufewa daga fitowar siginar FACP (Hoto 5-9, shafi na 12).
FACP INTERFACE NC, C, NO	Form “C” tuntuɓar tuntuɓar mai lamba @ 1A 28VDC don rahoton ƙararrawa (UL ba ya kimanta).

Fitar da Wutar Lantarki Voltage Saituna

Hannun Tsarin Aikace-aikacen Mai Gudanar da Wuta (na kowane ACM8)

HANKALI: Lokacin da aka saita allon samar da wutar lantarki don 12VDC yi amfani da baturi ɗaya kawai (1) 12VDC.
Kiyaye iyakataccen wayoyi daban da mara iyaka.
Yi amfani da tazara mafi ƙarancin 0.25 inci.
12AH batura masu caji sune manyan batura waɗanda zasu iya dacewa da wannan shingen. Dole ne a yi amfani da shingen baturi na waje mai jera UL idan ana amfani da batura 40AH ko 65AH.

Abubuwan Buƙatun Waya Masu Iyakancin Wutar NEC

Wayoyin da'ira mai iyaka da mara ƙarfi dole ne su kasance cikin rabuwa a cikin majalisar. Duk wayoyi masu iyakacin wutar lantarki dole ne su kasance aƙalla 0.25” nesa da kowane wayoyi marasa iyaka. Bugu da ƙari, duk na'urorin da'ira mai iyaka da wutar lantarki da na'urorin da ba su da iyaka dole ne su shiga kuma su fita daga majalisar ta hanyoyi daban-daban.
Daya irin wannan example na wannan aka nuna a kasa. Takamammen aikace-aikacen ku na iya buƙatar yin amfani da ƙwanƙwasawa daban-daban. Ana iya amfani da kowane ƙwanƙwasa magudanar ruwa. Don aikace-aikacen iyakantaccen wutar lantarki amfani da magudanar ruwa zaɓi ne. Dole ne a yi duk hanyoyin haɗin yanar gizo ta amfani da ma'auni mai dacewa CM ko FPL waya mai jaki (ko madaidaicin daidai).
Dole ne a ɗora shingen baturi na zaɓi na UL da aka jera kusa da wutar lantarki ta hanyoyin wayoyi na Class 1.
Don shigarwa na Kanada yi amfani da wayoyi masu kariya don duk haɗin gwiwa.
Lura: Koma zuwa zane mai sarrafa waya a ƙasa don hanyar da ta dace don shigar da waya mai jakin CM ko FPL (Hoto 4a).

Iyakantaccen ƙarfi don Maximal11F.
Mara iyaka mai ƙarfi don Maximal33F, Maximal55F,
Maximal75F, da Maximal77F.

Zane-zane na Hook-Up FACP

Hoto 5
Ƙunƙwalwar zaɓi ta amfani da abubuwan shigar da wutar lantarki guda biyu (2) keɓe (An zartar akan Maximal11F kawai, ba UL ya kimanta ba):

Hoto 6
Shigar da juyar da polarity daga fitowar sigina ta FACP (an yi la'akari da polarity a yanayin ƙararrawa):

Hoto 7
Kullum Buɗewa: Ba-Latching FACP shigar da fararwa:

Hoto 8
Kullum Buɗe shigar da faɗakarwa na FACP Latching tare da sake saiti:

Hoto 9
Kullum Rufewa: Ba-Latching FACP shigar da fararwa:

Hoto 10
Kullum Rufewa: Latching shigarwar FACP tare da sake saiti:

Matsakaicin Rukuni (H x W x D kimanin):
26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm)

Altronix baya da alhakin kowane kuskuren rubutu.
140 58th Street, Brooklyn, New York 11220 USA | waya: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: info@altronix.com | Garanti na rayuwa
IIMaximal11F/33F/55F/75F/77F Series

Ana iya Sarrafa da Kula da Samar da Wuta/Caji na eFlow yayin Ba da rahoto
Ƙarfin / Bincike daga Ko'ina akan hanyar sadarwa…

LINQ2 - Module Sadarwar Sadarwar Sadarwa
LINQ2 yana ba da damar IP mai nisa zuwa bayanan lokaci na ainihi daga eFlow wutar lantarki / caja don taimakawa ci gaba da tsarin aiki a matakan mafi kyau. Yana sauƙaƙe shigarwa da sauri da sauƙi da saiti, yana rage girman tsarin lokaci, kuma yana kawar da kiran sabis ɗin da ba dole ba, wanda ke taimakawa rage Jimlar Kudin Mallaka (TCO) - da kuma ƙirƙirar sabon tushen Maimaita Harajin Watanni (RMR).

Siffofin

UL da aka jera a Amurka da Kanada.
Ikon gida ko na nesa har zuwa (2) fitarwar wutar lantarki ta Altronix eFlow biyu ta LAN da/ko WAN.
Saka idanu bincike na ainihin lokaci: fitarwa na DC voltage, fitarwa na halin yanzu, AC & matsayi/sabis na baturi, canjin yanayin shigarwa, canjin yanayin fitarwa da zafin naúrar.

Ikon samun dama da sarrafa mai amfani: Ƙuntata karanta/rubutu, Ƙuntata masu amfani zuwa takamaiman albarkatu
Biyu (2) na cibiyar sadarwa mai sarrafa Form “C” Relays.
Abubuwan shigar da shirye-shirye guda uku (3): Sarrafa relays da samar da wutar lantarki ta hanyoyin kayan masarufi na waje.
Imel da sanarwar Dashboard na Windows
log log yana bin tarihin.
Secure Socket Layer (SSL).
Shirye-shirye ta hanyar USB ko web mai lilo – ya haɗa da software mai aiki da kebul na USB ƙafa 6.

LINQ2 Yana hawa Ciki da kowane Rukunin MaximalF

Maximal11F/33F/55F/75F/77F Jagororin Shigarwa Masu Sarrafa Wuta (Fused)

Takardu / Albarkatu

Altronix MAXIMAL77F Matsakaicin F Series Dual Power Supply Masu Kula da Wuta [pdf] Jagoran Shigarwa
MAXIMAL77F, Maximal F Series, Dual Power Supply Access Power Controllers, MAXIMAL77F Maximal F Series Dual Power Supply Access Power Controllers.

Magana

Manual mai amfani

Altronix MAXIMAL77F Matsakaicin F Series Dual Power Supply Masu Kula da Wuta

Misali Hada da

MaximalF Series Overview