Casio PQ-30B Digital Alarm Clock User Manual

Gabatarwa

This manual provides detailed instructions for the proper use and maintenance of your Casio PQ-30B Digital Alarm Clock. Please read this manual thoroughly before using the product to ensure correct operation and to prevent damage.

Kariyar Tsaro

• Kada a fallasa agogon ga yanayin zafi mai tsanani, hasken rana kai tsaye, ko kuma yawan danshi.
• Avoid strong impacts or dropping the clock.
• Kada ka yi ƙoƙarin wargaza ko gyara agogon da kanka. Duba ma'aikatan tsaro masu ƙwarewa.
• A kiyaye batura daga wurin yara. Idan an haɗiye, nemi kulawar likita nan da nan.
• Zubar da batura masu amfani bisa ga ƙa'idodin gida.

Kayan aiki da Sarrafa

Wannan hoton yana nuna gaba view of the Casio PQ-30B digital alarm clock. It features a digital display showing '10:58 PM', a prominent 'SNOOZE/LIGHT' button, and several control buttons and switches at the bottom for setting time and alarm functions.

Familiarize yourself with the following controls:

• Maɓallin SUNSHA/HASKEN: Activates the snooze function when the alarm sounds or illuminates the display for a few seconds.
• Maballin MIN: Adjusts minutes during time or alarm setting.
• Maballin HR: Adjusts hours during time or alarm setting.
• Time/Alarm Mode Selector (Slide Switch):
  • TM SET: Don saita lokacin yanzu.
  • AL SET: For setting the alarm time.
  • HANKALI: Normal time display mode.
• Alarm ON/OFF/SNZ Selector (Slide Switch):
  • AL ON: Activates the alarm.
  • AL OFF: Deactivates the alarm.
  • SNZ: Activates the snooze function (alarm will sound again after approximately 8 minutes).
• 12HR/24HR Button: Toggles between 12-hour and 24-hour time formats.

Saita

Shigar da baturi

The clock requires two LR44 batteries (included). To install or replace batteries:

1. Buɗe murfin ɗakin baturi dake bayan agogo.
2. Insert the two LR44 batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
3. Rufe murfin ɗakin baturi amintacce.

Saitin Lokacin Farko

After installing batteries, the display will show a default time. Set the current time as follows:

1. Slide the Time/Alarm Mode Selector switch to TM SET.
2. Danna maɓallin HR button to set the hour. Hold it down for faster adjustment.
3. Danna maɓallin MIN button to set the minutes. Hold it down for faster adjustment.
4. Danna maɓallin Saukewa: 12HR/24HR button to select your preferred time format (12-hour with AM/PM indicator or 24-hour).
5. Once the correct time is set, slide the Time/Alarm Mode Selector switch back to AL'ADA.

Umarnin Aiki

Saita Lokacin Ƙararrawa

1. Slide the Time/Alarm Mode Selector switch to AL SET. The alarm time will be displayed.
2. Danna maɓallin HR maɓallin don saita lokacin ƙararrawa da ake so.
3. Danna maɓallin MIN maballin don saita mintunan ƙararrawa da ake so.
4. Slide the Time/Alarm Mode Selector switch back to AL'ADA.

Kunna/Kashe Ƙararrawa

• To activate the alarm, slide the Alarm ON/OFF/SNZ Selector switch to AL ON. An alarm indicator (often a bell icon or similar) will appear on the display.
• To deactivate the alarm, slide the Alarm ON/OFF/SNZ Selector switch to AL KASHE. The alarm indicator will disappear.

Yin amfani da Ayyukan Snooze/Haske

• Lokacin da ƙararrawa ke sauti, latsa SOOZE / HASKE button to temporarily stop the alarm. The alarm will sound again after approximately 8 minutes.
• To illuminate the display at any time, press the SOOZE / HASKE button. The light will stay on for a few seconds.
• To stop the alarm completely after it sounds (without snooze), slide the Alarm ON/OFF/SNZ Selector switch to AL KASHE.

Switching 12-Hour / 24-Hour Format

In AL'ADA yanayin, danna maɓallin Saukewa: 12HR/24HR button to toggle between the 12-hour format (with AM/PM indicator) and the 24-hour format.

Kulawa

• Tsaftacewa: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or chemical solvents.
• Madadin Baturi: Replace batteries when the display becomes dim or the alarm weakens. Always replace both batteries at the same time.
• Ajiya: If not using the clock for an extended period, remove the batteries to prevent leakage.

Shirya matsala

• Nuni ba komai bane ko duhu: Duba shigar da batirin. Sauya batirin idan ya cancanta.
• Ƙararrawa baya yin sauti: Ensure the Alarm ON/OFF/SNZ Selector switch is set to AL ON. Verify the alarm time is correctly set.
• Nunin lokaci mara daidai: Re-set the current time following the 'Initial Time Setting' instructions.

Ƙayyadaddun bayanai

Garanti da Taimako

This Casio product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact Casio customer support. Keep your purchase receipt as proof of purchase.