PROEL DM220

Littafin Mai Amfani da Makirifo Mai Sauƙi na Proel DM220

Saukewa: DM220

1. Gabatarwa da Ƙarsheview

Thank you for choosing the Proel DM220 Dynamic Microphone. This manual provides essential information for the proper setup, operation, and maintenance of your microphone. The DM220 is a vocal microphone featuring a dynamic capsule and a cardioid polar pattern, designed for clear and extended frequency response, particularly transparent in low-mid frequencies. Its ergonomic barrel design ensures comfortable handling.

Proel DM220 Dynamic Microphone with carrying pouch and microphone clip

Image 1.1: The Proel DM220 Dynamic Microphone, shown with its included carrying pouch and microphone clip.

2. Mabuɗin Siffofin

  • Nau'in Mai Fassara: Motsi mai ƙarfi mai ƙarfi
  • Tsarin Polar: Cardioid, designed to pick up sound primarily from the front.
  • Martanin Mitar: 50 Hz - 15 kHz, providing a flat and extended range.
  • Hankali: -53 dB ± 3 dB
  • Maximum SPL for 0.5% THD: 135db ku
  • Alamar siginar-zuwa-Noise Ratio: 74db ku
  • Ƙunƙarar Ƙarfafawa: <600 ohms
  • Shawarar Ƙarfin Ƙarfafawa: 1500 ohms
  • Masu haɗawa: 3-pin male XLR for reliable audio connection.
  • Kunnawa/Kashewa: Integrated switch for convenient control.
  • Tsarin Ergonomic: Solid feel and comfortable handling.

3. Saita Umarnin

3.1 Haɗa Makirifo

  1. Locate the 3-pin male XLR connector at the base of the microphone.
  2. Connect a standard XLR cable (not included) to the microphone's connector. Ensure a secure fit.
  3. Connect the other end of the XLR cable to an appropriate input on your mixer, audio interface, or ampmai sanyaya wuta.
Kasa view of Proel DM220 microphone showing the XLR connector

Image 3.1: The base of the Proel DM220 microphone, illustrating the 3-pin male XLR connection port.

3.2 Shigar da Makirufo

  1. Attach the included microphone clip to a standard microphone stand (not included).
  2. Gently insert the Proel DM220 microphone into the clip, ensuring it is held firmly.
  3. Adjust the microphone stand and clip to the desired height and angle for optimal performance.
Proel DM220 Dynamic Microphone with its microphone clip

Image 3.2: The Proel DM220 microphone securely placed in its accompanying microphone clip.

4. Umarnin Aiki

4.1 Kunnawa / Kashewa

The Proel DM220 features an integrated on/off switch for convenient control. To activate the microphone, slide the switch to the 'ON' position. To deactivate, slide it to the 'OFF' position. Always ensure the microphone is off when not in use to prevent accidental sound capture or feedback.

4.2 Sanya Makirifo

Due to its cardioid polar pattern, the DM220 is most sensitive to sounds directly in front of it and rejects sounds from the sides and rear. For optimal vocal performance, position the microphone directly in front of the sound source (e.g., singer's mouth) at a distance of 2-6 inches (5-15 cm). Experiment with distance to achieve the desired tone and to minimize plosive sounds (P, B sounds).

5. Kulawa

5.1 Tsaftacewa

  • Wipe the microphone body with a soft, dry cloth.
  • For the grille, use a slightly damp cloth to remove any residue, then dry thoroughly. Do not allow moisture to enter the microphone capsule.
  • A guji amfani da sinadarai masu ƙarfi, masu narkewa, ko masu tsaftace muhalli.

5.2 Adana

When not in use, store the microphone in its protective carrying pouch in a cool, dry place, away from direct sunlight and extreme temperatures. This helps protect the microphone from dust, moisture, and physical damage.

6. Shirya matsala

  • Babu Fitar Sauti:
    • Ensure the microphone's on/off switch is in the 'ON' position.
    • Check all XLR cable connections at both the microphone and the audio input device.
    • Verify that the input channel on your mixer or interface is selected and its gain/volume is turned up.
    • Gwada da kebul na XLR daban don kawar da gazawar kebul.
    • Test the microphone on a different input channel or device if possible.
  • Karamar Sauti ko Karkatacciyar Sauti:
    • Adjust the gain level on your mixer or audio interface. Too low gain results in weak sound, too high can cause distortion.
    • Tabbatar cewa makirufo ɗin yana wurin da ya dace dangane da tushen sauti.
    • Check for any obstructions on the microphone grille.
  • Feedback (High-pitched squealing):
    • Sake sanya makirufo nesa da lasifika ko masu saka idanu.
    • Rage girman ko kuma ƙaruwar tashar makirufo.
    • Ensure speakers are not pointing directly at the microphone.

7. Ƙayyadaddun bayanai

Ƙayyadaddun bayanaiDaraja
AlamarPROEL
Sunan SamfuraDM220
Nau'in TransducerMotsin Coil Dynamic
Tsarin PolarCardioid (Unidirectional)
Amsa Mitar50 Hz - 15 kHz
Hankali-53 dB
Alamar sigina-zuwa-Noise Ratio74db ku
Ƙarƙashin Ƙarƙashin Ƙira<600 ohms
Shawarar Ƙauran Ƙaƙwalwar Ƙaƙwalwa1500 ohms
Masu haɗawa3-pin Male XLR
Siffa ta MusammanOn/Off Switch, Wired
Tushen wutar lantarkiCable Electric
Girman Abu (L x W x H)18 x 5.3 x 5.3 cm
Nauyin Abu300 Grams
Shawarwari AmfaniVocal (Chant)
Na'urori masu jituwaAmplififi

8. Garanti da Tallafawa

Specific warranty information for the Proel DM220 Dynamic Microphone is not provided in the available product details. For warranty claims or technical support, please contact your retailer or the official Proel customer service directly. Keep your purchase receipt as proof of purchase.

© 2023 PROEL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.