Inventum MK350 Milk Frother

Gabatarwa

Thank you for choosing the Inventum MK350 Milk Frother. This appliance is designed to quickly and efficiently froth milk for various beverages or heat milk to your desired temperature. Please read this manual carefully before using the appliance to ensure safe and optimal operation. Keep this manual for future reference.

Muhimman Umarnin Tsaro

• Karanta duk umarnin kafin amfani.
• Do not immerse the frother unit or power base in water or other liquids.
• Tabbatar da voltage da aka nuna akan kayan yayi daidai da mains na yankin kutage kafin haɗi.
• Wannan kayan aikin na amfanin gida ne kawai. Kada ku yi amfani da waje.
• Koyaushe sanya na'urar a kan wuri mai kyau, a miƙe, kuma mai jure zafi.
• Kada a yi aiki da na'urar tare da lalace ko filogi, ko bayan na'urar ta yi rauni ko ta lalace ta kowace hanya.
• A kiyaye na'urar da igiyar sa ba za su iya isa ga yara ba.
• Kar a taɓa wurare masu zafi. Yi amfani da hannaye ko ƙulli.
• Cire toshe daga kanti lokacin da ba a amfani da shi kuma kafin tsaftacewa. Bada damar yin sanyi kafin sakawa ko cire sassa, da kuma kafin tsaftace kayan aikin.
• Kar a yi amfani da haɗe-haɗe wanda mai ƙira bai bada shawarar ba.

Samfurin Ƙarsheview

Familiarize yourself with the components of your Inventum MK350 Milk Frother.

Hoto na 1: This image displays the Inventum MK350 Milk Frother from the front, showcasing its stainless steel upper body, black base, handle, and the control panel with indicator lights and power button.

Hoto na 2: A gefe view of the Inventum MK350 Milk Frother, emphasizing the ergonomic handle and the pouring spout integrated into the stainless steel jug.

Hoto na 3: A view into the interior of the milk frother, highlighting the non-stick coating and the small central pin where the frothing whisk is attached.

Hoto na 4: A close-up image of the small, detachable whisk with a spring coil, designed for creating milk foam. This whisk attaches to the central pin inside the frother.

Hoto na 5: The separate power base for the milk frother, featuring a central connector for the frother unit and a power cord.

Abubuwan:

• Jug ɗin Frother: Stainless steel jug with non-stick interior.
• Hannu: Ergonomic handle for safe pouring.
• Murfi: Transparent lid (not explicitly shown but implied for frother).
• Murfin Kumfa: Detachable whisk with spring coil for frothing.
• Heating Whisk: (If applicable, otherwise use frothing whisk for heating too). The input suggests one whisk for frothing.
• Kwamitin Gudanarwa: Power button and indicator lights for different functions.
• Tushen Wuta: Tushen juyawa mara waya mai digiri 360 tare da igiyar wutar lantarki.

Saita

1. Cire kaya: Carefully remove all packaging materials. Retain packaging for future storage or transport.
2. Farkon Tsaftacewa: Before first use, clean the frother jug and whisk according to the 'Maintenance and Cleaning' section. Wipe the exterior of the power base with a damp zane.
3. Wuri: Place the power base on a dry, stable, and level surface away from water sources and heat.
4. Abin da aka makala: Insert the frothing whisk onto the central pin inside the frother jug. Ensure it is securely seated.

Umarnin Aiki

The Inventum MK350 offers options for hot frothing, cold frothing, and heating milk.

1. Prepare the Frother: Ensure the frothing whisk is correctly installed inside the jug.
2. Ƙara Madara: Pour cold milk into the frother jug. Observe the internal markings for maximum fill levels:
   • Domin kumfa (hot or cold): Do not exceed the 115 ml mark.
   • Domin dumama kawai (without frothing): Do not exceed the 240 ml mark.

   Note: Using full-fat milk typically yields the best frothing results.
3. Place on Power Base: Position the frother jug onto the power base.
4. Zaɓi Aiki:
   • Domin hot frothing or dumama madara: Press the power button once. The red indicator light will illuminate, and the frother will begin operation.
   • Domin sanyi kumfa: Press and hold the power button for approximately 2 seconds. The blue indicator light will illuminate, and the frother will begin cold frothing.
5. Aiki: The frother will operate for approximately 90 seconds for frothing, or until the milk reaches the optimal temperature for heating, then automatically switch off. The indicator light will turn off.
6. Hidima: Carefully remove the frother jug from the power base and pour the frothed or heated milk into your beverage.
7. Kwantar da hankali: Allow the frother to cool down for a few minutes between uses to ensure optimal performance and prevent overheating.

Kulawa da Tsaftacewa

Regular cleaning ensures the longevity and hygiene of your milk frother. Always unplug the appliance before cleaning.

1. Cire kuma Cool: Disconnect the power base from the mains outlet and allow the frother jug to cool down completely after use.
2. Cire Whisk: Carefully remove the frothing whisk from the central pin inside the jug.
3. Clean Frother Jug: The frother jug is A wanke da hannu kawai. Wash the interior of the jug with warm, soapy water and a soft sponge or cloth. The non-stick coating facilitates easy cleaning. Rinse thoroughly and dry immediately. Do not use abrasive cleaners or scouring pads, as these can damage the non-stick surface.
4. Clean Whisk: Wash the frothing whisk with warm, soapy water. Use a small brush if necessary to clean the spring coil. Rinse and dry thoroughly.
5. Tsaftace Waje: Goge bayan kwalbar frother da tushen wutar lantarki ta amfani da tallaamp zane. Kada a nutsar da tushen wutar lantarki a cikin ruwa.
6. Ajiya: Once clean and dry, store the frother with the whisk inside the jug, or in a safe place.

Shirya matsala

If you encounter issues with your Inventum MK350 Milk Frother, refer to the following common problems and solutions:

• Frother does not start:
  • Ensure the power base is securely plugged into a working electrical outlet.
  • Verify the frother jug is correctly placed on the power base.
  • Danna maɓallin wuta da ƙarfi.
• Milk is not frothing or frothing poorly:
  • Check that the frothing whisk is properly installed on the central pin.
  • Ensure the milk level does not exceed the maximum fill line for frothing (115 ml).
  • Use cold, fresh milk. Full-fat milk generally froths better than low-fat or skim milk.
  • Clean the whisk and the interior of the jug thoroughly, as residue can affect performance.
• Milk is not heating:
  • Ensure the milk level does not exceed the maximum fill line for heating (240 ml).
  • Confirm the correct function (hot frothing/heating) was selected.
  • Allow the appliance to cool down if it has been used multiple times in quick succession, as an overheating protection mechanism might be active.
• Indicator lights are not working:
  • Check power connection and ensure the frother is operating. If the frother is working but lights are off, contact customer support.

If the problem persists after attempting these solutions, please contact Inventum customer support or your retailer.

Ƙayyadaddun bayanai

Garanti da Taimako

For information regarding the warranty period and conditions for your Inventum MK350 Milk Frother, please refer to the warranty card included with your purchase or consult the retailer from whom you purchased the product. For technical support, spare parts, or service inquiries, please contact Inventum customer service directly or visit their official webshafin don cikakkun bayanai.