Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Jagoran Mai Amfani

1. Gabatarwa

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

Mabuɗin fasali:

Ultra-compact, portable ampkafa kafa.
Inspired by the legendary Vox AC30 ampsautin lifi.
Separate Volume and Gain control knobs.
3-band EQ (Bass, Middle, Treble) for tone shaping.
Integrated FX Loop for external effects integration.

2. Umarnin Tsaro

Tushen wutan lantarki: Use only the specified 18V DC power adapter (center negative). Incorrect voltage zai iya lalata naúrar.
Samun iska: Tabbatar da isassun iska. Kar a toshe buɗewar samun iska.
Danshi: A ajiye na'urar nesa da ruwa ko danshi mai yawa.
Zafi: Ka guji sanya naúrar kusa da tushen zafi ko cikin hasken rana kai tsaye.
Tsaftacewa: Tsaftace kawai da bushe bushe.
Hidima: Kada ka yi ƙoƙarin yi wa wannan sashin hidima da kanka. Ka miƙa duk wani sabis ga ma'aikata masu ƙwarewa.

3. Samfurin Ya Ƙareview

Hotone Nano Legacy British Invasion Ampkafa Head

Hoto: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Head, showcasing its compact size and overall design.

Ikon Gabatarwa:

Hotone Nano Legacy British Invasion Front Panel Diagram

Hoto: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

Bayanai: 1/4" mono jack for connecting your guitar.
GASKIYA: Controls the low frequency response of your tone.
TSAKI: Controls the mid frequency response of your tone.
TAFIYA: Controls the high frequency response of your tone.
SAMU: Controls the pre-amp gain level, affecting distortion and sustain.
SAURARA: Yana sarrafa juzu'in fitarwa na gaba ɗaya ampmai sanyaya wuta.
KASHE/KASHE KASHE: Yana kunnawa ko kashe naúrar.

Haɗin Rukunin Baya:

Hotone Nano Legacy British Invasion Rear Panel Diagram

Hoto: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

DC 18V: Power input for the included 18V DC adapter (center negative).
FITAR DA WAYA/LAYI: 1/8" stereo jack for headphones or direct recording.
AUX A: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
FX LOOP MAYARWA: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
FITAR DA MAGANA: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
FX LOOP Aika: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. Saita da Haɗin kai

Haɗin Wuta: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
Haɗin Gitar: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
Haɗin Magana: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. Gargadi: Kar a yi aiki da amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
Belun kunne/Layi (Zaɓi ne): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
AUX Input (Optional): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
FX Loop (Optional): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. Umarnin Aiki

Kunna Wuta: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
Saitunan Farko: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
Daidaita Riba: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
Daidaita Girma: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
Siffar Sauti tare da EQ:
- GASKIYA: Adjust for low-end warmth and fullness.
- TSAKI: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
- TAFIYA: Adjust for brightness and clarity.
Kashe Wuta: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. Kulawa

Tsaftacewa: Yi amfani da laushi, bushe bushe don tsaftace waje na amplifier. Do not use liquid cleaners, aerosols, or solvents.
Ajiya: Ajiye da amplifier a wuri mai sanyi da bushewa, nesa da hasken rana kai tsaye da yanayin zafi mai tsanani.
Sufuri: Lokacin jigilar kaya, tabbatar da cewa ampAna sanya lifier a cikin akwati mai aminci don hana lalacewa ta jiki.
Kulawar Kebul: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. Shirya matsala

Matsala	Dalili mai yiwuwa	Magani
Babu fitarwar sauti	Ba a haɗa wuta ko kunnawa ba. Guitar cable faulty or not fully inserted. Speaker cable faulty or not fully inserted. Rashin daidaiton juriyar lasifika. Volume/Gain knobs set to minimum. Headphones connected to PHONES/LINE OUT.	Check power connection and ON/OFF switch. Ensure guitar cable is secure and functional. Ensure speaker cable is secure and functional. Verify speaker impedance is 4-16Ω. Increase Volume and Gain. Disconnect headphones if using speaker output.
Excessive hum or noise	Faulty power supply or ground loop. Saitunan riba mai yawa. Tsangwama daga wasu na'urorin lantarki. Single-coil pickups (inherently more susceptible to hum).	Try a different power outlet or a high-quality isolated power supply. Reduce gain settings. Matsar ampmai ɗagawa nesa da sauran kayan lantarki. Consider using humbucker pickups or a noise gate pedal.
Sautin da ya lalace ko kuma mai rauni	Kuskuren igiyoyi. Incorrect speaker connection. Lasifikar da ta lalace. Siginar shigarwa ta yi zafi sosai.	Check and replace cables if necessary. Ensure speaker cable is correctly connected and speaker impedance is correct. Test with a different speaker if possible. Reduce output from guitar or preceding pedals.

8. Ƙayyadaddun bayanai

Samfura:	TANLA1
Fitar Wattage:	5 Watts
Tushen wutar lantarki:	Corded Electric (18V DC, center negative)
Na'urori masu jituwa:	Gitar
Nau'in Haɗawa:	1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
Nauyin Abu:	15.5 oz (kimanin gram 440)
Girman samfur:	2.34 x 5.03 x 2.95 inci (kimanin. 5.9 x 12.8 x 7.5 cm)
Nau'in Abu:	Bakin Karfe
Launi:	Baki

9. Garanti Bayani

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone website. Riƙe shaidar siyan ku don da'awar garanti.

10. Tallafin Abokin Ciniki

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone website.

Visit Hotone Audio Support Page (Fitample link, ainihin hanyar haɗi na iya bambanta)

HOTONE TANLA1