BLACK+DECKER D988 Finishing Attachment Sander Instruction Manual

Gabatarwa

This manual provides essential instructions for the safe and effective use of your BLACK+DECKER D988 Finishing Attachment Sander. Please read this manual thoroughly before operating the tool and retain it for future reference.

Muhimman Bayanan Tsaro

Koyaushe bi matakan tsaro na asali don rage haɗarin wuta, girgiza wutar lantarki, da rauni na mutum.

• Saka kariyar ido.
• Sanya kariya ta ji.
• Tabbatar cewa kayan aikin yana amintacce clamped.
• Tsare hannaye daga sassa masu motsi.
• Disconnect the tool from the power source before changing accessories or performing maintenance.
• Yi amfani da na'urorin haɗi da aka ba da shawarar kawai.

Saita

Image showing the BLACK+DECKER D988 Finishing Attachment Sander, a compact sanding head designed to attach to a compatible power unit.

Ana kwashe kaya

Carefully remove the finishing attachment sander and all accessories from the packaging. Inspect for any damage.

Attaching to Power Unit

The D988 is an attachment. Ensure your BLACK+DECKER power unit is compatible.

1. Align the attachment with the power unit's drive shaft.
2. Push the attachment firmly onto the power unit until it clicks into place.
3. Verify the attachment is securely fastened before use.

Haɗa Takardun Sanda

The D988 uses hook-and-loop sanding sheets.

1. Ensure the power unit is disconnected from the power supply.
2. Peel off the old sanding sheet if present.
3. Align the new sanding sheet with the base of the attachment, ensuring the holes (if any) match for dust extraction.
4. Press the sanding sheet firmly onto the hook-and-loop base.

Umarnin Aiki

Gabaɗaya Aiki

Connect the power unit to a suitable power source.

Riƙe kayan aiki da ƙarfi da hannaye biyu.

Place the sanding base flat on the workpiece before starting the tool.

Move the sander slowly and evenly over the surface. Avoid applying excessive pressure, as this can reduce efficiency and damage the workpiece or tool.

For optimal results, sand with the grain of the wood.

Cirar Kura

If your power unit or attachment has a dust extraction port, connect a suitable dust bag or vacuum cleaner to minimize dust exposure.

Kulawa

Kulawa na yau da kullun yana tabbatar da kyakkyawan aiki kuma yana tsawaita rayuwar kayan aikin ku.

Tsaftacewa

After each use, disconnect the tool from the power supply.

Goge wajen kayan aikin da tallaamp zane. Kada a yi amfani da sinadarai masu tsauri ko masu gogewa.

Clear any dust buildup from the ventilation openings to prevent overheating.

Sanding Pad Inspection

Periodically inspect the hook-and-loop sanding pad for wear or damage. A worn pad will not hold sanding sheets effectively. Replace if necessary.

Adana

Ajiye kayan aikin a wuri busasshe, amintacce, inda yara ba za su iya isa ba.

Shirya matsala

Ƙayyadaddun bayanai

• Samfura: D988
• Alamar: BLACK+DECKER
• Nauyin Abu: 500g ku
• Matsakaicin Gudun Juyawa: 10000 rpm
• ASIN: B00IQQ92IG
• Mai ƙira: Black & Decker

Garanti da Taimako

For warranty information or technical support, please refer to the documentation provided with your BLACK+DECKER power unit or visit the official BLACK+DECKER website.

This attachment is covered by the standard BLACK+DECKER warranty applicable to its power tool system.