1. Gabatarwa
The CONTEC CMS50D2 Pulse Oximeter is a non-invasive device designed for measuring the oxygen saturation of arterial hemoglobin (SpO2) and the pulse rate. This device is intended for spot-checking and continuous monitoring of adult and pediatric patients in home and clinical environments. It provides a quick and accurate assessment of respiratory function.
The concentration of oxygen determines the percentage of hemoglobin in arterial blood that is saturated with oxygen, making it an important parameter for evaluating respiratory function. The device is small, lightweight, and portable, making it convenient for use anywhere.
2. Bayanin Tsaro
Please read all safety warnings and instructions carefully before using this device. Improper use may result in inaccurate readings or device damage.
- Kada kayi amfani da oximeter na bugun jini a cikin yanayin MRI ko CT.
- Do not use the device in environments with flammable anesthetics.
- The device is not intended for continuous monitoring of patients requiring constant supervision.
- Tsare na'urar daga ruwa da danshi.
- Consult a medical professional for interpretation of readings and before making any medical decisions.
3. Kayan Samfura
- Determines arterial oxygen saturation (SpO2) and pulse rate (PRbpm).
- Displays SpO2 value and pulse rate value.
- Ƙara girmatage indicator and audible alarm if pulse is above set limit.
- Suitable for individuals with heart failure, chronic obstructive pulmonary diseases, bronchial asthma, and for high-altitude sports (mountaineering, skiing, aviation).
- Adjustable display mode and screen brightness.
- OLED display in blue and yellow with pulse waveform graph.
- Automatic power-off: The device will turn off automatically in 5 seconds if the finger is improperly placed or removed.
4. Abubuwan Kunshin
Kunshin samfurin yawanci ya ƙunshi abubuwa masu zuwa:
- 1 x CONTEC CMS50D2 Pulse Oximeter
- 1 x Lanyard
- 2 x AAA baturi
- 1 x Manhajar mai amfani
5. Saita
5.1. Shigar da Baturi
The CMS50D2 Pulse Oximeter requires two AAA batteries for operation. Ensure correct polarity when inserting the batteries.
- Open the battery compartment cover located on the back of the device.
- Saka batura biyu na AAA bisa ga alamun polarity (+ da -) a cikin ɗakin.
- Rufe murfin ɗakin baturi amintacce.
Hoto 1: Gaba view of the Andon CMS50D2 Pulse Oximeter, showing the OLED display and finger insertion area.
6. Umarnin Aiki
Follow these steps to obtain accurate readings:
- Tabbatar an shigar da batura daidai.
- Bude clamp na oximeter.
- Insert one of your fingers (preferably the index, middle, or ring finger) into the rubber opening of the oximeter, ensuring the nail surface is facing upwards towards the display.
- Saki clamp, allowing the oximeter to securely hold your finger.
- Danna maɓallin wuta a saman na'urar don kunna ta.
- Keep your hand still during the measurement. Do not shake your finger.
- The readings for SpO2 and pulse rate will appear on the display within a few seconds.
- To change the display orientation or brightness, briefly press the power button while the device is on.
- The device will automatically power off after 5 seconds of inactivity or if the finger is removed.
Figure 2: The pulse oximeter correctly placed on a finger, displaying SpO2 and pulse rate readings.
7. Bayanin Nuni
The OLED display provides the following information:
- SpO2: Peripheral Oxygen Saturation (percentage). This indicates the percentage of hemoglobin in your blood that is saturated with oxygen. Normal values typically range from 95% to 100%.
- PRbpm: Pulse Rate (beats per minute). This is the number of times your heart beats per minute. Normal adult resting heart rate ranges from 60 to 100 bpm.
- Pulse Bar Graph: A vertical bar graph indicating the strength of the pulse.
- Plethysmograph (Waveform): A graphical representation of the pulse, showing blood flow through the finger.
- Alamar baturi: Yana nuna ragowar rayuwar baturi.
8. Kulawa da Kulawa
8.1. Tsaftacewa
Clean the surface of the oximeter before and after each use. Use a soft cloth dampened with medical alcohol (70% ethanol or isopropanol) to wipe the surface. Do not immerse the device in liquid.
8.2. Adana
Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If the device will not be used for an extended period, remove the batteries to prevent leakage.
9. Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Babu nuni bayan kunnawa | Batura sun mutu ko an shigar da su ba daidai ba. | Replace batteries or re-install them correctly, observing polarity. |
| Karatuttuka mara inganci | Finger not inserted properly; patient movement; strong ambient light; nail polish or artificial nails. | Re-insert finger correctly; remain still; shield from strong light; remove nail polish/artificial nails. |
| "Finger Out" or "Error" message | Finger not detected or poor signal quality. | Ensure finger is fully inserted and still. Try a different finger. |
| Nuni yana da duhu | Low battery or brightness setting. | Replace batteries. Adjust brightness by pressing the power button. |
10. Ƙayyadaddun bayanai
- Sunan Samfura: Saukewa: CMS50D2
- Mai ƙira: Andon (CONTEC)
- Girma: 7.62 x 2.54 x 5.08 cm
- Nauyi: 25g ku
- Tushen wutar lantarki: 2 x AAA baturi (an haɗa)
- Rayuwar Baturi: Approximately 50 hours of continuous operation
- Measurement Range (SpO2): 70-100%
- Nau'in Nuni: OLED, blue and yellow
- A kashe kai tsaye: Ee, bayan daƙiƙa 5 na rashin aiki
- Ƙasar Asalin: Switzerland
11. Garanti da Tallafawa
Specific warranty details for the CONTEC CMS50D2 Pulse Oximeter may vary depending on the region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed warranty information.
For technical support or inquiries, please contact the manufacturer, CONTEC, or the authorized seller from whom you purchased the device. Keep your purchase receipt as proof of purchase.