Jagorar Mai Amfani da Lasifikar Bluetooth Mara waya ta HyperGear Wave 14704

Gabatarwa

The HyperGear Wave Portable Wireless Bluetooth Speaker (Model 14704) is designed to deliver high-definition stereo sound in various environments. Its IPX4 waterproof rating makes it suitable for use near water, while the built-in microphone allows for hands-free calls. This manual provides essential information for the proper setup, operation, and maintenance of your speaker.

Image: HyperGear Wave speaker, showcasing its waterproof design with water splashes.

Abubuwan Kunshin

Tabbatar cewa duk abubuwa suna nan a cikin kunshin:

• HyperGear Wave Speaker
• 3.5mm Stereo Auxiliary Cable
• Micro USB Cajin Cable
• Jagorar mai amfani (wannan takaddar)

Image: The HyperGear Wave speaker alongside its included 3.5mm auxiliary cable and Micro USB charging cable.

Saita

1. Cajin Shugaban Majalisar

Before initial use, fully charge the speaker. Connect the Micro USB Charging Cable to the speaker's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The charging indicator light will illuminate during charging and turn off or change color when fully charged.

2. Kunnawa / Kashewa

Press and hold the Power button (usually marked with a power icon) for approximately 3 seconds to turn the speaker on or off. A sound prompt or LED indicator will confirm the status change.

Umarnin Aiki

1. Haɗa Bluetooth

1. Ensure the speaker is powered on and within 33 feet (10 meters) of your Bluetooth-enabled device.
2. The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to your speaker's specific LED behavior).
3. A kan na'urarka, kewaya zuwa saitunan Bluetooth kuma bincika na'urori da ake da su.
4. Select "HyperGear Wave" (or similar name) from the list.
5. Once paired, the speaker will emit a confirmation sound, and the LED light will become solid.

Mai magana zai yi ƙoƙarin sake haɗawa ta atomatik zuwa na'urar da aka haɗa ta ƙarshe lokacin da aka kunna ta.

Image: The HyperGear Wave speaker positioned on sand, demonstrating its wireless capability for outdoor use.

2. Basic Controls

• Kunna/Dakata: Danna maɓallin Play/Dakata sau ɗaya.
• Upara sama: Danna maɓallin '+'.
• Downara ƙasa: Danna maɓallin '-'.
• Waƙa ta gaba: Latsa ka riƙe maɓallin '+'.
• Tafiya ta baya: Latsa ka riƙe maɓallin '-'.
• Amsa/Ƙarshen Kira: Danna maɓallin Kunna/Dakatar da kira sau ɗaya yayin kira mai shigowa.
• Karɓar Kira: Danna ka riƙe maɓallin Kunna/Dakatar da kira yayin kira mai shigowa.

3. Audio Input Modes

The HyperGear Wave speaker supports multiple audio input options:

• Yanayin Bluetooth: Default wireless connection.
• Auxiliary (AUX) Mode: Connect an audio device using the included 3.5mm Stereo Auxiliary Cable. The speaker will automatically switch to AUX mode when the cable is inserted.
• Yanayin Katin Micro SD: Insert a Micro SD card (not included) with audio files into the designated slot. The speaker will automatically detect and play music from the card.

Hoto: Kusanci view of the speaker highlighting its compatibility with Bluetooth, Auxiliary input, and Micro SD cards.

Kulawa

• Tsaftacewa: Yi amfani da taushi, damp cloth to clean the speaker's exterior. Avoid harsh chemicals or abrasive cleaners.
• Bayyanar Ruwa: While IPX4 waterproof, avoid submerging the speaker. Ensure all port covers are securely closed before exposure to water.
• Ajiya: Ajiye lasifikar a wuri mai sanyi da bushewa, nesa da yanayin zafi mai tsanani da kuma hasken rana kai tsaye.
• Kulawar Baturi: Don tsawaita rayuwar baturi, kauce wa cikar cajin lasifikar akai-akai. Yi cajin shi akai-akai, ko da ba a amfani da shi na tsawan lokaci ba.

Image: The HyperGear Wave speaker attached to a kayak, illustrating its suitability for splash-prone environments.

Shirya matsala

• Lasifika ba zai kunna ba: Tabbatar cewa batirin ya yi caji. Haɗa kebul ɗin caji sannan ka sake gwadawa.
• Ba za a iya haɗawa da na'urar Bluetooth ba:
  • Tabbatar cewa lasifikar tana cikin yanayin haɗawa (LED mai walƙiya).
  • Tabbatar cewa an kunna Bluetooth akan na'urarka.
  • Matsar da lasifikar kusa da na'urarka (cikin ƙafa 33).
  • Turn off and on both the speaker and your device's Bluetooth.
  • Forget the speaker from your device's Bluetooth list and attempt to re-pair.
• Babu sauti ko ƙaramin ƙara:
  • Daidaita ƙarar a kan lasifikar da na'urar da aka haɗa.
  • Ensure the speaker is properly paired or the AUX cable/Micro SD card is correctly inserted.
  • Bincika idan tushen mai jiwuwa yana kunne.
• Rashin ingancin sauti:
  • Matsar da lasifikar kusa da na'urar Bluetooth ɗinka don guje wa tsangwama.
  • Tabbatar babu wani cikas tsakanin lasifikar da na'urarka.
  • If using AUX, check the cable for damage and ensure it's fully inserted.

Ƙayyadaddun bayanai

Garanti da Taimako

Bayanin Garanti

This HyperGear product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official HyperGear website.

Tallafin Abokin Ciniki

If you encounter any issues or have questions not covered in this manual, please contact HyperGear customer support. Contact information can typically be found on the product packaging or the official HyperGear website: www.hypergear.com.