EOTECH XPS2 Holographic Weapon Sight XPS2-0 User Manual

1. Samfurin Ya Ƙareview & Fasali

The EOTECH XPS2-0 Holographic Weapon Sight is a compact and robust optic designed for rapid target acquisition and reliable performance. Its advanced holographic technology provides a clear and precise aiming solution for various shooting scenarios.

• EOTECH XPS2-0: Holographic Weapon Sight in black with 68MOA ring and (1) 1 MOA dot reticle.
• Ƙarfafa Ƙarfafawa: Compatible with both 1" weaver and MIL-STD 1913 rails, offering flexible mounting options.
• Daidaitacce Haske: Features 20 brightness settings to ensure optimal visibility in any lighting condition, from bright daylight to low-light environments.
• Karamin Tsara: Its small footprint leaves ample rail space for additional accessories such as rear iron sights or magnifiers.

2. Saita

2.1 Mounting the Sight

The XPS2-0 is designed for easy mounting on any 1" Weaver or MIL-STD 1913 rail. Ensure the rail is clean and free of debris before mounting. Use the provided thumb-bolt or Allen-type bolt to securely fasten the sight to your firearm's rail. Tighten the bolt firmly to prevent movement under recoil.

2.2 Shigar da Baturi

The XPS2-0 uses a single CR123 battery. To install or replace the battery:

1. Unscrew the battery cap located on the front right side of the sight.
2. Insert the CR123 battery with the positive (+) end facing forward.
3. Securely screw the battery cap back on.

The sight will flash when the battery is at 20% capacity, indicating it's time for replacement soon.

3. Operating the Sight

3.1 Power On/Off & Brightness Adjustment

The control buttons are located on the rear of the sight:

• Don Kunnawa: Press either the 'Up' (▲) or 'Down' (▼) button.
• Don Daidaita Haske: Press the 'Up' (▲) button to increase brightness or the 'Down' (▼) button to decrease brightness. There are 20 settings available.
• Don Kashe: Simultaneously press both the 'Up' (▲) and 'Down' (▼) buttons.

3.2 Reticle Description

The XPS2-0 features a 68 MOA (Minute of Angle) ring with a 1 MOA dot in the center. This reticle design allows for quick target acquisition while maintaining precision.

3.3 Windage and Elevation Adjustments

Adjustments for windage (left/right) and elevation (up/down) are located on the side of the sight. Each click provides a precise adjustment to the point of impact.

4. Kulawa

To ensure the longevity and optimal performance of your EOTECH XPS2-0, regular maintenance is recommended:

• Tsaftace ruwan tabarau: Use a soft, lint-free cloth and lens cleaning solution to gently wipe the optical surfaces. Avoid abrasive materials or excessive pressure.
• Tsaftace Jiki: Goge jikin gani da tallaamp cloth to remove dirt and grime. Avoid harsh chemicals.
• Ajiya: Store the sight in a dry, cool place away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.

5. Shirya matsala

5.1 Ƙarƙashin Ƙarfin Baturi

When the battery life reaches approximately 20%, the reticle will flash upon power-up to indicate a low battery condition. Replace the CR123 battery promptly to ensure continued operation.

5.2 Reticle Blinking Under Recoil

If the reticle blinks or flickers during recoil, this is another indication of a low battery. Replace the battery to resolve this issue.

6. Ƙayyadaddun bayanai

7. Garanti & Tallafi

The EOTECH XPS2-0 Holographic Weapon Sight comes with a 10-year limited warranty from the manufacturer, covering defects in materials and workmanship under normal use. For warranty claims or technical support, please refer to the official EOTECH website ko tuntuɓi sabis na abokin ciniki kai tsaye.

It is recommended to register your product online to ensure you are contacted in the event of any product issues and to facilitate warranty service.

8. Muhimman Bayanan Tsaro

GARGADI: Wannan kayan yana dauke da sinadarai wadanda Jihar California ta sani don haifar da cutar kansa da nakasar haihuwa ko wata cutar haihuwa.