Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Gabatarwa

Na gode da siyaasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Bayanin Tsaro

• Koyaushe kiyaye wannan samfurin bushe. Kada a yi amfani da ruwan sama ko damp yanayi.
• Do not disassemble. If repairs become necessary, this product must be sent to an authorized maintenance center.
• A kiyaye nesa da yara.
• Do not use the flash unit in the presence of flammable gases, chemicals, or other materials.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Samfurin Ya Ƙareview

3.1 Maɓalli Maɓalli

• Full TTL Functionality: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Powerful Functions: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Wireless Grouping System: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Kariyar zafi fiye da kima: Designed with protection against overheating for extended use.
• Ingantattun Ayyuka: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Ayyukan Zuƙowa: Automatic and manual zoom from 24mm to 105mm.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Faɗin Daidaitawa: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

Abubuwan Kunshin 3.2

• 1 x Godox TT350N Flash Unit
• 1 x Mini Stand
• 1 x Harkar Kariya
• 1 x Color Filter
• 1 x Manhajar mai amfani
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Sashe Sunaye da Ayyuka

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoom Selection Button
2. Maɓallin Zaɓin Yanayin
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Maɓallin Gwaji/ Nuni Mai Shirya Filashi
5. LCD panel
6. Maɓallin Aiki tare Mai Girma
7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
8. Group/Channel Button (reusable button, in wireless mode)
9. Canjin Wuta
10. Kulle Zoben
11. Maɓallin Zaɓin Mara waya (maɓallin sake amfani da shi, dogon latsawa na tsawon daƙiƙa 2)
12. Takalmi
13. Saitin Button
14. Zaɓi Bugun kira
15. Dakin Baturi
16. Sensor Control Na gani
17. Mayar da hankali Taimakawa Haske
18. Flash Head
19. Ƙungiyar Haske
20. Faɗin Faɗin Ginawa

4. Saita

4.1 Shigar da Baturi

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Open the battery compartment cover located on the side of the flash unit.
2. Insert two AA batteries according to the polarity indicators (+/-) inside the compartment.
3. Rufe murfin ɗakin baturi amintacce.

4.2 Mounting to Camera

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Kunnawa / Kashewa

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• To power off, slide the Power Switch to the 'OFF' position.

5. Hanyoyin Aiki

The TT350N offers various flash modes to suit different shooting scenarios. Press the MODE maɓallin don zagayawa ta cikin yanayin da ake da su.

5.1 TTL Autoflash Mode

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Danna maɓallin MODE button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Manual Flash Mode (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Danna maɓallin MODE button until 'M' is displayed.
• Juya da Zaɓi Bugun kira to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Danna maɓallin MODE button until 'Multi' is displayed.
• Yi amfani da Zaɓi Bugun kira kuma SET button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 High-Speed Sync (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Danna maɓallin SYNC button to activate HSS. The HSS icon will appear on the LCD.

5.5 First/Second Curtain Sync

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Flash Exposure Compensation (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• In TTL mode, press the SET button. The FEC value will blink.
• Juya da Zaɓi Bugun kira to adjust the FEC value.
• Danna maɓallin SET button sake don tabbatarwa.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Babban Sashe: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
• Slave Unit: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• Yi amfani da GR/CH button kuma Zaɓi Bugun kira to set the group (A, B, C) and channel (1-16).
• Ensure all units are set to the same channel and group for proper communication.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• Yanayin S1: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• Yanayin S2: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the SAURARA button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Dogon danna C.Fn button for 2 seconds to enter the custom function settings menu.
• Yi amfani da Zaɓi Bugun kira to navigate through the available functions.
• Danna maɓallin SET button to select a function and then use the Zaɓi Bugun kira don canza darajarsa.
• Danna maɓallin SET button again to confirm the change.
• Dogon danna C.Fn button again to exit the custom function settings.

8. Kulawa

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Store the flash in a cool, dry place, away from direct sunlight and extreme temperatures.
• Avoid strong impacts or dropping the unit.

9. Shirya matsala

• Filashin ba ya yin wuta: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Wireless triggering issues: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Ƙayyadaddun bayanai

11. Garanti da Tallafawa

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox website. Da fatan za a riƙe shaidar siyan ku don da'awar garanti.