Maxlite SL-48231-50

Maxlite Shop Light SL-48231-50 Instruction Manual

Model: SL-48231-50

Samfurin Ƙarsheview

The Maxlite Shop Light SL-48231-50 is a 48-inch, 23W, 120V LED shop light designed for various indoor applications such as garages, workshops, and basements. It provides instant full brightness with a 5000K daylight color temperature and is ENERGY STAR certified for energy efficiency. This fixture features a built-in on/off pull chain, a 5ft power cord with a 120V plug, and is linkable with up to 4 units for extended lighting coverage.

Maxlite Shop Light SL-48231-50

Image: Maxlite Shop Light SL-48231-50, a white 48-inch LED fixture with a pull chain and power outlet on one end.

Bayanin Tsaro

Always read and follow all safety instructions before installation and operation. Disconnect power before servicing. This product is intended for indoor use only. Do not modify the fixture or use it for purposes other than its intended use.

  • Ensure the power supply is turned off at the circuit breaker before installation.
  • Do not install near heat sources or in wet locations.
  • Use appropriate mounting hardware for your installation surface.
  • Do not exceed the maximum linkable units (4 units).

Saita da Shigarwa

The Maxlite Shop Light SL-48231-50 is designed for semi-flush ceiling mount installation. No assembly is required for the light fixture itself.

Abubuwan Kunshin:

  • 1 x Maxlite Shop Light SL-48231-50
  • Mounting hardware (hooks, chains, screws)
  • 5ft power cord with 120V plug

Matakan Shigarwa:

  1. Shirya Wurin Shigarwa: Choose a suitable location for mounting, such as a garage, workshop, or basement. Ensure the surface can support the weight of the fixture (approximately 15.5 ounces).
  2. Kashe Wuta: Before beginning any electrical work, turn off the power to the installation area at the main circuit breaker.
  3. Dutsen Fixture:
    • Mark the desired mounting points on the ceiling or wall.
    • Install the provided mounting hardware (e.g., ceiling hooks or screws) securely into the marked points.
    • Hang the shop light using the installed hardware. The fixture has screw holes for flush mounting.
  4. Haɗa Ikon: Plug the 5ft power cord into a standard 120V electrical outlet.
  5. Link Multiple Units (Optional): If linking multiple units, connect the linking cable from the output end of one fixture to the input end of the next. Do not exceed 4 linked units.
  6. Dawo da Power: Da zarar an gama shigarwa kuma duk haɗin suna da aminci, kunna wutar lantarki a wurin na'urar busar da wutar lantarki.

Umarnin Aiki

The Maxlite Shop Light SL-48231-50 is simple to operate using its integrated pull chain.

  • Kunnawa: Gently pull the chain extending from the fixture once to turn the light on.
  • Kashewa: Gently pull the chain again to turn the light off.

The light provides instant full brightness upon activation.

Kulawa

The Maxlite Shop Light SL-448231-50 requires minimal maintenance due to its LED technology.

  • Tsaftacewa: Before cleaning, ensure the power is disconnected. Use a soft, dry cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these can damage the finish or electrical components.
  • Sauyawa Bulb: This fixture uses integrated LED lighting and does not require bulb replacement. If the LEDs fail, the entire fixture typically needs to be replaced.
  • Dubawa: Periodically inspect the power cord and mounting hardware for any signs of wear or damage. If damage is found, discontinue use and contact a qualified electrician or the manufacturer.

Shirya matsala

MatsalaDalili mai yiwuwaMagani
Haske baya kunnawa
  • Babu iko ga kanti.
  • Pull chain is in the "off" position.
  • Kuskuren daidaitawa.
  • Check the circuit breaker and ensure the outlet is live.
  • Pull the chain to cycle the light on.
  • Tuntuɓi tallafin abokin ciniki don taimako.
Haske flickers ko dims.
  • Sake-sake haɗi.
  • Voltage canje -canje.
  • Fixture nearing end of life.
  • Tabbatar cewa an toshe igiyar wutar lantarki cikin aminci.
  • Tuntuɓi ma'aikacin lantarki idan voltagal'amura sun ci gaba.
  • Tuntuɓi goyon bayan abokin ciniki.
Linked lights do not work.
  • Incorrect linking connection.
  • Exceeded maximum linked units.
  • Verify linking cables are properly connected.
  • Ensure no more than 4 units are linked.

Ƙayyadaddun bayanai

SiffarDaki-daki
AlamarMaxlite
Lambar SamfuraSaukewa: SL-48231-50
Girman samfur48"L x 2.5"W x 2"H
Nauyin Abu15.5 oz
Nau'in Tushen HaskeLED
Watatage23 watts
Voltage120 Volts
Zazzabi Launi5000K (Hasken Rana)
Hanyar sarrafawaJa Sarkar sarrafawa
Nau'in hawaCeiling Mount (Semi Flush)
Amfanin Cikin Gida/WajeCikin gida
Tushen wutar lantarkiCorded Electric
Mai HaɗiHar zuwa raka'a 4
Takaddun shaidaENERGY STAR certified, ETL

Garanti da Taimako

Bayanin Garanti:

This Maxlite product comes with a Limited Warranty. For specific terms and conditions of the warranty, please refer to the documentation included with your purchase or visit the official Maxlite website. The provided data states "Warranty Description: N/a.", indicating general warranty information is not detailed here, but a limited warranty is offered.

Taimakon Abokin Ciniki:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Maxlite customer support. Visit the official Maxlite webshafin don mafi yawan bayanan tuntuɓar yanzu.

You can also visit the Maxlite store on Amazon for more information: Maxlite Amazon Store

© 2023 Maxlite. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.