Other P951 Bluetooth Headphones User Manual

Gabatarwa

Thank you for choosing the Other P951 Bluetooth Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. Please read this manual thoroughly before using the product.

Bayanin Tsaro

To prevent damage to your headphones or injury to yourself, please observe the following safety precautions:

• Kada a fallasa belun kunne ga yanayin zafi mai tsanani, danshi, ko ruwa mai yawa.
• Guji faduwa ko ƙaddamar da belun kunne ga tasiri mai ƙarfi.
• Kada kayi yunƙurin ƙwace ko gyara belun kunne. Wannan zai ɓata garanti.
• Listen at moderate volume levels to prevent hearing damage. Prolonged exposure to loud sounds can cause permanent hearing loss.
• A kiyaye nesa da yara.
• Dispose of the product and battery responsibly according to local regulations.

Saita

1. Cajin belun kunne

Before first use, fully charge your P951 headphones. A full charge typically takes approximately 2-3 hours.

1. Locate the charging port on the headphone (usually a Micro USB or USB-C port).
2. Connect the provided USB charging cable to the headphone's charging port.
3. Haɗa ɗayan ƙarshen kebul na USB zuwa tushen wutar lantarki na USB mai jituwa (misali, tashar USB ta kwamfuta, adaftar bango).
4. The LED indicator light will typically glow red during charging and turn off or change to blue/green when fully charged.

Hoto: Gefe view of the P951 headphones, highlighting the charging port and control buttons for reference.

2. Haɗa Bluetooth

To connect your P951 headphones wirelessly to a device:

1. Tabbatar ana cajin belun kunne kuma an kashe su.
2. Press and hold the Power button (often also the Multi-function button) for approximately 5-7 seconds until the LED indicator light flashes red and blue alternately. This indicates pairing mode.
3. On your mobile phone or other Bluetooth-enabled device, go to the Bluetooth settings.
4. Bincika available devices. You should see "P951" or a similar name in the list.
5. Select "P951" to connect. Once connected, the LED indicator will usually flash blue slowly or turn solid blue.
6. Idan an nemi kalmar sirri, shigar da "0000".

3. Wired Connection (3.5mm Audio Cable)

You can also use the P951 headphones with a wired connection:

1. Connect one end of a 3.5mm audio cable (not always included, check package contents) to the audio input jack on the headphones.
2. Connect the other end of the 3.5mm audio cable to the audio output jack of your device (e.g., phone, laptop, MP3 player).
3. When connected via cable, the Bluetooth function is typically disabled, and the headphones operate passively.

Umarnin Aiki

1. Kunnawa / Kashewa

• Kunna Wuta: Latsa ka riƙe maɓallin wuta na kusan daƙiƙa 3 har sai alamar LED ta haskaka.
• Kashe Wuta: Latsa ka riƙe maɓallin wuta na kusan daƙiƙa 3-5 har sai alamar LED ta kashe.

2. Ikon sake kunna kiɗan

The P951 headphones feature touch controls and physical buttons for music management:

• Kunna/Dakata: Short press the Multi-function button (often the Power button).
• Upara sama: A takaice danna maballin Ƙarar Ƙara (+).
• Downara ƙasa: A takaice danna maɓallin Ƙarar ƙasa (-).
• Waƙa ta gaba: Dogon danna maɓallin Ƙarar Ƙara (+).
• Tafiya ta baya: Dogon danna maɓallin Ƙaƙwalwar Ƙara (-).

3. Gudanar da Kira

With the built-in microphone, you can manage calls directly from your headphones:

• Amsa Kira: Short press the Multi-function button when a call comes in.
• Ƙarshen Kira: Short press the Multi-function button during a call.
• Karɓar Kira: Long press the Multi-function button when a call comes in.
• Maimaita Lamba na Ƙarshe: Danna maɓallin Multi-function sau biyu.

4. Active Noise Cancellation (ANC)

The P951 headphones feature Active Noise Cancellation to reduce ambient noise.

• Kunna/Kashe ANC: Look for a dedicated ANC button or a specific combination press on the control panel. (Note: Specific button location may vary. Refer to product diagrams if available.)
• When ANC is active, a separate LED indicator may light up, or you may hear an audio prompt.

Image: The P951 Bluetooth Headphones, showcasing their over-ear design and general appearance.

Kulawa

1. Tsaftacewa

• Shafa belun kunne da taushi, bushe, kyalle mara lint.
• Kada a yi amfani da masu tsabtace abrasive, barasa, ko kaushi na sinadarai.
• Clean ear cushions gently with a slightly damp cloth if necessary, and allow them to air dry completely before use.

2. Adana

• Ajiye belun kunne a wuri mai sanyi, bushewa, nesa da hasken rana kai tsaye da matsanancin zafi.
• If the headphones are foldable (as indicated by images), fold them carefully to save space and protect them during travel.
• Avoid placing heavy objects on top of the headphones.

Image: The P951 headphones in a folded position, demonstrating their portability and ease of storage.

3. Kula da baturi

• To prolong battery life, avoid fully discharging the headphones frequently.
• Idan ana adanawa na tsawon lokaci, cajin belun kunne zuwa kusan 50% kowane ƴan watanni.

Shirya matsala

Ƙayyadaddun bayanai

Bayanin Garanti

Wannan samfurin ya zo da garantin masana'anta na yau da kullun. Da fatan za a duba katin garanti da aka haɗa a cikin marufin samfurin ku don takamaiman sharuɗɗa, sharuɗɗa, da tsawon lokaci. Ajiye rasitin siyan ku a matsayin shaidar siyan duk wani da'awar garanti.

The warranty typically covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Tallafin Abokin Ciniki

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact your retailer or the manufacturer's customer support. Details for customer support can usually be found on the product packaging or the manufacturer's official website.

When contacting support, please have your product model (P951) and proof of purchase ready.