1. Bayanin Tsaro
Please read these instructions carefully before installation and retain them for future reference. Improper installation or use can lead to electrical shock, fire, or other hazards.
- Always turn off the power supply at the main circuit breaker before beginning any electrical work.
- This product must be installed by a qualified electrician or a person with sufficient electrical knowledge.
- Tabbatar da voltage supply (110V) matches the requirements of the fixture.
- Kar a gyara kayan aikin ta kowace hanya.
- Ka nisantar da kayan aikin daga kayan da za a iya ƙonewa.
- This fixture is designed for indoor use only and is not water-resistant.
2. Abubuwan Kunshin
Verify that all components are present and undamaged before installation.
- Small LED Ceiling Light (1 unit)
- Installation Accessories (screws, wire nuts)
- Manual mai amfani
- Hawan Hardware
3. Ƙayyadaddun samfur
| Siffar | Ƙayyadaddun bayanai |
|---|---|
| Lambar Samfura | CL-JCYXBK-US |
| Girma | 9.8"L x 9.8"W x 9.4"H (D25*H24 cm) |
| Ƙarfi | 30W |
| Voltage | 110V |
| Launi mai haske | Farin Dumi (3000K) |
| Haske | 2400 Lumen |
| Kayan abu | Acrylic, Aluminum, Metal |
| Nau'in Shigarwa | Hawan Dutsen |
| Amfanin Cikin Gida/Waje | Cikin gida |
| Nauyin Abu | 1.48 fam |
Note: The ceiling light cannot switch color temperature or adjust brightness.
4. Umarnin Shigarwa
Follow these steps for safe and proper installation.
- Kashe Wuta: Locate the circuit breaker controlling the light fixture's power and turn it off. Verify power is off using a voltage gwajin.
- Shirya Dutsen Sama: Tabbatar cewa akwatin mahaɗin rufin yana amintacce kuma yana iya tallafawa nauyin kayan aiki.
- Haɗa Bakin Haɗawa: Secure the mounting bracket (included) to the junction box using the provided screws. Ensure it is firmly attached.
- Haɗin Waya: Haɗa wayoyin kayan aiki zuwa wayoyin gida masu dacewa ta amfani da ƙwayoyin waya da aka bayar.
- Connect the black wire (live) from the fixture to the black wire (live) from the ceiling.
- Connect the white wire (neutral) from the fixture to the white wire (neutral) from the ceiling.
- Connect the green or bare copper wire (ground) from the fixture to the ground wire from the ceiling.
- Dutsen Fixture: Carefully align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure no wires are pinched during this step.
- Dawo da Power: Da zarar an shigar da na'urar amintacce, kunna wutar lantarki a na'urar kashe wutar lantarki.
Image: Electrical wiring connections for ceiling light installation. Connect black to black, white to white, and ground to ground.
Image: Attaching the mounting bracket to the ceiling junction box.
5. Umarnin Aiki
This LED ceiling light is designed for simple operation.
- Once installed and power is restored, operate the light using a standard wall switch connected to the fixture's circuit.
- The light will turn on/off with the flip of the wall switch.
- This fixture provides a fixed warm white (3000K) light and does not support dimming or color temperature adjustment.
6. Kulawa
Kulawa akai-akai yana tabbatar da ingantaccen aiki da tsawon rai na na'urar hasken ku.
- Tsaftacewa: Before cleaning, ensure the power is turned off at the circuit breaker. Use a soft, dry, or slightly damp cloth to wipe the fixture. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or electrical components.
- Sauyawa Bulb: This fixture uses integrated LED chips and does not require bulb replacement.
7. Shirya matsala
If you encounter issues with your light fixture, refer to the following common problems and solutions:
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Haske baya kunna | Babu wutar lantarki Sadarwar wayoyi maras kyau Maɓallin bango mara kyau | Check circuit breaker. Ensure power is on. Turn off power, check wire connections for tightness. Gwada ko maye gurbin bangon bango. |
| Haske flickers | Sadarwar wayoyi maras kyau Incompatible dimmer switch (this fixture is not dimmable) | Kashe wutar lantarki, duba hanyoyin haɗin waya. Ensure a standard ON/OFF wall switch is used. Remove any dimmer switches. |
| Haske ya dushe | Voltage Fixture not designed for higher brightness | Tabbatar voltage supply is 110V. This fixture has a fixed brightness of 2400 lumens. |
Idan matsalar ta ci gaba bayan gwada waɗannan hanyoyin, tuntuɓi tallafin abokin ciniki.
8. Garanti da Tallafawa
This CANEOE LED Hallway Light comes with a one-year warranty service daga ranar sayayya.
If you have any questions, concerns, or require assistance with your product during the warranty period, please contact the seller or CANEOE customer support. Provide your model number (CL-JCYXBK-US) and proof of purchase for faster service.
For further assistance, please visit the CANEOE store on Amazon: CANEOE Store