AVARRO 0E-HDMIMX4 HDMI Switcher User Manual

1. Gabatarwa

The AVARRO 0E-HDMIMX4 is a high-performance 4x4 HDMI matrix switcher designed to route any of four HDMI input sources to any of four HDMI output displays. It supports 4K Ultra HD resolutions, HDCP 2.2, and advanced features like Smart EDID Management and a built-in 4K-1080P downscaler. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance of your device.

2. Bayanin Tsaro

• Karanta duk umarnin a hankali kafin aiki da na'urar.
• Do not expose this unit to rain, moisture, or excessive humidity.
• Do not place any objects filled with liquids on the unit.
• Kada a toshe wuraren samun iska.
• Yi amfani da adaftar wutar da aka bayar kawai.
• Kada ka yi ƙoƙarin gyara na'urar da kanka. Ka miƙa duk wani sabis ga ma'aikata masu ƙwarewa.
• Ensure proper grounding for all connected equipment.

3. Abubuwan Kunshin

Verify that all items are present before installation:

• AVARRO 0E-HDMIMX4 HDMI Switcher Unit
• Ikon Nesa na IR
• DC 12V Adaftar Wutar Lantarki
• Jagorar mai amfani (wannan takaddar)
• Mounting Brackets (if applicable, not explicitly mentioned but common for such devices)

4. Samfurin Ya Ƙareview

4.1 Gaban gaba

Hoto: Gaba view of the AVARRO 0E-HDMIMX4 HDMI Switcher, showing the IR receiver and output selector buttons.

• Mai karɓar IR: Receives signals from the IR remote control.
• Output Selectors (1-4): Buttons to select the input source for each corresponding HDMI output. Each output has its own set of source selection buttons (1, 2, 3, 4).
• Alamar LED: Indicate the currently selected input for each output.

4.2 Rear Panel

Hoto: Na baya view of the AVARRO 0E-HDMIMX4 HDMI Switcher, displaying all input/output ports and control interfaces.

• DC 12V IN: Tashar shigar da wuta.
• FW (Micro USB): Micro-USB port for firmware upgrades.
• DA-232: Serial port for control via RS232 commands.
• IP CONTROL (RJ45): Ethernet port for network control and Web Shigar UI.
• IR EXT: Port for connecting an external IR receiver.
• HDMI IN (1-4): HDMI input ports for connecting source devices (e.g., Blu-ray player, game console).
• HDMI OUT (1-4): HDMI output ports for connecting display devices (e.g., TV, projector).
• S/PDIF OUT (1-4): Digital audio output ports for each HDMI output, supporting PCM 2.0/5.1, Dolby Digital, and DTS up to 5.1 Channel.

5. Saita da Haɗin kai

1. Kashe Duk Na'urori: Before making any connections, ensure all source devices, displays, and the switcher are powered off.
2. Haɗa Tushen HDMI: Connect your HDMI source devices (e.g., media players, gaming consoles) to the HDMI IN 1-4 ports on the switcher using high-quality HDMI cables.
3. Haɗa Nunin HDMI: Connect your HDMI display devices (e.g., TVs, projectors) to the HDMI OUT 1-4 ports on the switcher using high-quality HDMI cables.
4. Connect Audio Outputs (Optional): If desired, connect external audio systems to the S/PDIF OUT ports for digital audio extraction.
5. Haɗa hanyar sadarwa (Zaɓi ne): For IP control and Web UI access, connect an Ethernet cable from your network router/switch to the IP CONTROL (RJ45) port.
6. Haɗa Ikon: Connect the provided DC 12V power adapter to the DC 12V IN port on the switcher, then plug the adapter into a power outlet.
7. Wutar Na'urori: Power on the switcher, then your display devices, and finally your source devices.

Lura: For optimal performance with 4K content, use certified High-Speed HDMI cables.

6. Umarnin Aiki

6.1 Front Panel Control

To switch an input source for a specific output:

• Locate the "SELECTOR" buttons for the desired OUTPUT (1-4).
• Press the corresponding "SOURCE" button (1, 2, 3, or 4) below the "SELECTOR" button to route the desired input to that output. The LED indicator will illuminate to show the active input.

6.2 Ikon nesa na IR

The included IR remote control allows for convenient switching from a distance. Point the remote towards the IR receiver on the front panel of the switcher.

• Input Buttons (1-4): Zaɓi tushen shigarwa.
• Output Buttons (A-D or 1-4): Selects the output to control.
• Canjawar Matrix: Typically, you would press an Output button, then an Input button to route that input to the selected output. Refer to the remote's specific layout for exact button functions.

6.3 Web Ikon UI

The Web UI provides a graphical interface for advanced control and configuration.

1. Ensure the switcher is connected to your network via the IP CONTROL port.
2. Obtain the IP address of the switcher (refer to network settings or device documentation for default IP or discovery method).
3. Bude a web browser a kan kwamfutar da aka haɗa zuwa wannan cibiyar sadarwa.
4. Enter the switcher's IP address into the browser's address bar.
5. Log in using the default credentials (if prompted, refer to device documentation for default username/password).
6. Yi amfani da Web UI to manage input/output routing, EDID settings, and other advanced features.

6.4 RS232 Gudanarwa

The RS232 port allows for integration with control systems using serial commands. Refer to the detailed RS232 command set documentation (usually available from the manufacturer's website) for specific protocols and commands.

7. Smart EDID Management

The 0E-HDMIMX4 features Smart EDID Management to ensure compatibility between source devices and displays. EDID (Extended Display Identification Data) communicates display capabilities to the source. The switcher can automatically manage EDID or allow manual configuration via the Web UI to optimize video and audio formats for connected devices.

8. Haɓaka Firmware

Firmware updates can improve performance, add new features, or resolve issues. The 0E-HDMIMX4 supports firmware upgrading via both the Micro-USB port and the Web UI.

• Micro-USB: Connect a computer to the FW (Micro USB) port and use the manufacturer's provided upgrade tool.
• Web UI: Shiga cikin Web UI and navigate to the firmware upgrade section.

Always download the latest firmware and instructions from the official AVARRO website before attempting an upgrade.

9. Ƙayyadaddun bayanai

10. Shirya matsala

Idan kun fuskanci matsaloli, duba waɗannan matsalolin da mafita na yau da kullun:

• Babu Fitowar Bidiyo/Audio:
  • Tabbatar cewa duk kebul na HDMI an haɗa su da aminci.
  • Verify the power adapter is correctly connected and the unit is powered on.
  • Check that the correct input source is selected for the desired output.
  • Test with different HDMI cables.
  • Bypass the switcher to confirm source and display functionality.
  • Check EDID settings, especially with mixed resolution displays.
• Sigina na wucin gadi/Yushe:
  • Use high-quality, certified HDMI cables, especially for longer runs or 4K content.
  • Ensure cables are not excessively bent or damaged.
  • Check for potential electromagnetic interference from other devices.
• Ikon nesa Baya Aiki:
  • Ensure there are no obstructions between the remote and the switcher's IR receiver.
  • Maye gurbin baturan ramut.
  • Verify the remote is pointed directly at the IR receiver.
• Web UI/IP Control Issues:
  • Confirm the Ethernet cable is properly connected.
  • Verify the switcher's IP address and ensure your computer is on the same network subnet.
  • Check firewall settings on your computer or network.

11. Kulawa

• Tsaftacewa: Yi amfani da kyalle mai laushi da busasshe don tsaftace wajen na'urar. Kada a yi amfani da masu tsaftace ruwa ko kuma masu fitar da iska.
• Samun iska: Tabbatar cewa hanyoyin samun iska a bayyane suke kuma ba a toshe su ba don hana zafi fiye da kima.
• Ajiya: If storing the unit for an extended period, disconnect power and store in a cool, dry place.

12. Garanti da Tallafawa

AVARRO products are designed for reliability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official AVARRO webshafin yanar gizo. Don tallafin fasaha, rajistar samfura, ko don saukar da sabbin direbobi da firmware, da fatan za a ziyarci www.avarrus.com or contact AVARRO customer service.