Gabatarwa
This manual provides essential instructions for the safe and effective use of your AOLIKES 3.7V 1400mAh Lithium Polymer replacement battery. This battery is designed to power specific Sena communication systems and cameras. Please read this manual thoroughly before installation and use.
Image: The AOLIKES 3.7V 1400mAh Lithium Polymer battery with connector.
Bayanin Tsaro
Observe the following safety precautions to prevent damage to the battery or connected devices, and to ensure personal safety:
- Kada a wargaza, ko huda, ko kuma a gyara batirin.
- Avoid exposing the battery to extreme temperatures (high or low), direct sunlight, or fire.
- Kiyaye baturin daga ruwa ko wasu ruwaye.
- Use only compatible chargers and charging methods.
- If the battery shows signs of swelling, leakage, or damage, discontinue use immediately and dispose of it properly.
- A kiyaye nesa da yara.
- The battery features built-in protection against overcharging, overheating, and short circuits to ensure optimal operation and reduce potential hazards.
Daidaituwa
This AOLIKES 3.7V 1400mAh battery is designed for specific Sena devices. Please verify your device model before installation.
Na'urori masu jituwa:
- Sena Spider RT1 Bluetooth Communication System
- Sena 50R 3-Button Motorcycle Bluetooth Headset
- Sena SP130
- Sena SP128
- Sena SP53
- Sena Prism Tube WiFi Camera
Important Incompatibility Note:
This battery is NOT compatible with Sena 50R or Sena 50R-01 Motorcycle Bluetooth Headsets.
Image: Visual representation of battery compatibility, highlighting specific Sena models it fits and does not fit.
Abubuwan Kunshin
Kowane fakiti ya ƙunshi abubuwa masu zuwa:
- AOLIKES 3.7V 1400mAh Lithium Polymer Battery (Quantity: 2)
Image: The product packaging displaying the model number 822262A and barcode X0020KM47N.
Saita da Shigarwa
The AOLIKES battery is designed for plug-and-play installation. However, replacing internal batteries in electronic devices may require specific tools and technical knowledge. If you are unsure, it is recommended to seek professional assistance to avoid damaging your device.
General Installation Steps (Consult your device's manual for specific instructions):
- Kashe Na'urar: Ensure your Sena device is completely powered off before beginning.
- Gano Wurin Baturi: Refer to your device's original manual to locate and open the battery compartment. This may involve removing screws or prying open casing.
- Cire haɗin tsohon baturi: Carefully disconnect the old battery's connector from the device's circuit board. Note the orientation of the connector.
- Cire Tsohon Baturi: Gently remove the old battery. It may be secured with adhesive.
- Sanya Sabon Baturi: Place the new AOLIKES battery into the compartment. Ensure it fits correctly without bending or forcing.
- Haɗa Sabon Baturi: Connect the new battery's plug to the device's circuit board, ensuring the correct orientation.
- Amintaccen Sashin: Rufe kuma kiyaye sashin baturin.
- Na farko Cajin: Perform an initial charge as described in the "Operating" section.
Image: The AOLIKES battery showing its connector, illustrating the component to be plugged into the device.
Aiki
After successful installation, the battery is ready for use. For optimal performance and longevity, follow these guidelines:
- Na farko Cajin: It is recommended to fully charge the battery before its first use.
- Cajin: Use the original charger provided with your Sena device or a compatible charger. The battery's nominal voltage is 3.7V, and it fully charges to 4.2V.
- Fitarwa: Avoid completely draining the battery frequently. Lithium Polymer batteries benefit from partial discharge and recharge cycles. The shutdown voltagku 2.85v.
- Zazzabi: Operate the device with the battery within its recommended temperature range to ensure efficiency and safety.
Kulawa
Kulawa mai kyau yana ƙara tsawon rayuwar batirinka:
- Ajiya: If storing the battery for an extended period, charge it to approximately 50-60% and store it in a cool, dry place. Avoid full discharge or full charge during long-term storage.
- Tsaftacewa: Keep the battery and its contacts clean and dry. Use a soft, dry cloth if cleaning is necessary.
- Dubawa: Periodically inspect the battery for any physical damage, swelling, or signs of leakage.
Shirya matsala
If you encounter issues with your battery, consider the following common solutions:
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Baturi baya caji | Incorrect connection, faulty charger, or incompatible device. | Ensure the battery is correctly connected. Try a different compatible charger. Verify device compatibility. |
| Na'urar baya kunnawa | Battery not installed correctly, battery fully discharged, or device issue. | Re-check battery connection. Charge the battery. Test with another known good battery if possible. |
| Shortan rayuwar baturi | Battery not fully charged, aging battery, or high power consumption by device. | Ensure full charge. If battery is old, consider replacement. Check device settings for power-saving options. |
Ƙayyadaddun bayanai
Technical details for the AOLIKES 3.7V 1400mAh Lithium Polymer Battery:
| Siffar | Daki-daki |
|---|---|
| Nau'in Baturi | Polymer Lithium Ion Rechargeable Battery |
| Ƙarfin baturi | 1400mAh |
| Voltage | 3.7V |
| Cikakken Cajin Voltage | 4.2V |
| Ƙarfi | 5.18 da Wh |
| Rufewa Voltage | 2.85V |
| Lambar Samfura | 822262A (also referred to as RT1 Battery Replacement) |
| Nauyin Baturi | 22 Grams |
Garanti da Taimako
Wannan samfurin ya zo tare da a 30-day refund guarantee. For any issues or support inquiries, please contact your retailer or the manufacturer directly.
Bayanin Mai masana'anta:
Mai ƙira: SHENZHEN XINLAN TECHNOLOGY CO., LTD
Adireshi: No 401, 215 Hao ChenWuWei, GangTouCun, GuanHu SheQu, GuanLan JieDao, Longhua Qu, SHENZHEN, GUANGDONG, 518110, CN
Imel: uk@rzfinter.com
Tel: +86-13560728197
Wakilin EU:
Firmname: E-CrossStu GmbH
Adireshi: Mainzer Landstr.69, Frankfurt am Main, Hessen, 60329 Deutschland
Imel: e-crossstu@web.de
Tel: +49 69332967674
Image: Product packaging showing manufacturer and EU representative contact details.