Milesight UG56-868M IoT LoRaWAN Gateway Wi-Fi User Manual

1. Samfurin Ya Ƙareview

The Milesight UG56-868M is an industrial IoT LoRaWAN gateway designed for robust and reliable data transmission in various applications. It supports Wi-Fi connectivity for flexible deployment and efficient data backhaul. This manual provides comprehensive instructions for setting up, operating, maintaining, and troubleshooting your gateway.

Hoto 1.1: Gaba view of the Milesight UG56-868M LoRaWAN Gateway. The device is a compact, rectangular unit with a white and black casing. It features LED indicators for POWER, STATUS, LoRa, Wi-Fi, and ETH, along with the Milesight logo and model number UG56. An antenna is connected to the right side.

2. Abubuwan Kunshin

Please check the package carefully to ensure all items are present and undamaged. If any item is missing or damaged, please contact your vendor.

• 1 x Milesight UG56-868M LoRaWAN Gateway
• (Note: Typical packages may also include a power adapter, mounting kit, and antenna, depending on the specific product variant.)

3. Bayanin Tsaro

Don tabbatar da amintaccen aiki da hana lalacewa, da fatan za a kiyaye matakan tsaro masu zuwa:

• Kada a bijirar da na'urar ga ruwa ko danshi.
• Do not attempt to open or modify the device.
• Use only the power adapter supplied or recommended by Milesight.
• Tabbatar da samun iska mai kyau a kusa da na'urar don hana zafi.
• Tsare na'urar daga filaye masu ƙarfi na lantarki.

4. Saita

4.1 Shigarwa na Jiki

1. Zaɓi Wuri: Select a central location for the gateway, preferably at a higher elevation, to maximize LoRa signal coverage. Avoid placing it near large metal objects or other electronic devices that may cause interference.
2. Haɗa Eriya: Carefully screw the provided LoRa antenna onto the SMA connector on the side of the gateway. Ensure it is finger-tight.
3. Hawa (Na zaɓi): If wall-mounting or pole-mounting, use the appropriate mounting kit (sold separately) and follow its instructions.

4.2 Haɗin Wuta

1. Connect the power adapter to the DC power input port on the gateway.
2. Plug the power adapter into a standard electrical outlet. The POWER LED indicator on the front panel should illuminate.

4.3 Haɗin Hanyar sadarwa

The UG56-868M supports both Ethernet and Wi-Fi for backhaul connectivity.

Haɗin Ethernet:

• Connect an Ethernet cable from the gateway's ETH port to your router or network switch. The ETH LED indicator should illuminate.

Haɗin Wi-Fi:

• Upon initial power-up, the gateway may broadcast a default Wi-Fi SSID (e.g., "Milesight_Gateway_XXXX").
• Connect your computer or mobile device to this Wi-Fi network.
• Bude a web kuma kewaya zuwa adireshin IP na asali (misali, http://192.168.23.150) to access the gateway's web dubawa don daidaitawa.
• Refer to the "Operating" section for initial configuration steps.

5. Aiki

5.1 LED Manuniya

The front panel of the UG56-868M features several LED indicators to show the device's status:

• WUTA: Solid green when the device is powered on.
• MATSAYI: Indicates system status (e.g., blinking during boot, solid when ready).
• LoRa: Indicates LoRaWAN activity (e.g., blinking when receiving LoRa packets).
• Wi-Fi: Indicates Wi-Fi network status.
• ETH: Indicates Ethernet network status.

5.2 Kanfigareshan Farko (Web Matsakaici)

After connecting to the gateway's network (via Ethernet or Wi-Fi), you can access its web hanyar sadarwa don cikakken tsari.

1. Bude a web browser and enter the gateway's IP address (default: http://192.168.23.150).
2. Enter the default username and password (refer to the label on the device or the quick start guide for default credentials).
3. Upon successful login, you will be prompted to change the default password for security reasons. It is highly recommended to do so.
4. Kewaya ta cikin web interface to configure network settings (Wi-Fi SSID/password, static IP), LoRaWAN server settings (e.g., Network Server address), and other advanced features.

6. Kulawa

6.1 Sabunta Firmware

Regularly check the Milesight official website for the latest firmware versions. Firmware updates can provide new features, performance improvements, and security patches.

• Zazzage firmware file from the Milesight support portal.
• Shiga gateway's web dubawa.
• Navigate to the "System" or "Maintenance" section and locate the firmware upgrade option.
• Loda firmware da aka sauke file and follow the on-screen instructions. Do not power off the device during the upgrade process.

6.2 Tsaftacewa

Clean the exterior of the gateway with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.

7. Shirya matsala

Wannan sashe yana ba da mafita ga al'amuran gama-gari waɗanda zaku iya fuskanta.

8. Ƙayyadaddun bayanai

9. Garanti da Tallafawa

Milesight products are typically covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Milesight website.

For technical support, firmware downloads, or further assistance, please contact Milesight customer support or visit their official support portal:

• Milesight Official Website: www.milesight.com
• Tuntuɓi Taimako: Koma zuwa ga webshafin don bayanin tuntuɓar yanki.