DBIT TD-LTE WiFi6 Router 4G LTE Tashar Bayanai mara waya
Thank you for purchasing our 4G wireless router!
- This installation guide is suitable for a 4G wireless router. The operating instructions in the manual are all based on the Windows 7 system.
- The Company reserves the right of final interpretation without prior notice in case of product appearance update and iteration, product specification parameter change, etc.
Jerin kaya
Please check if the product configuration is complete. It should include the following items:
- 4G Wireless Router X I
- power Adapter X I
- Jagoran Shigar Saurin X 1
Hanyoyin sadarwa
LED fitilu Manuniya
Wuraren aiki
- To ensure the normal functioning of the router, the operating environment is recommended as follows:
- (a) Ka nisanta daga zafi, kula da samun iska.
- (b) Lay the equipment on a flat surface.
- (c) Sanya kayan aiki a cikin busasshen yanayi ba tare da ƙura ba.
- (d) Dismantle the power supply and all wires in thunderstorm weather in case of a lightning strike.
Lura: Please supply rated power for equipment. If unmatched power is supplied, the router may get damaged.
Ƙayyadaddun bayanai
Adaftar Wuta:
- DC power supply, DC12V/1A
Matakan shigarwa
1.14G katin SIM
- The device has a built-in 3G/4G modem. Before using the device, you need to purchase a local 4G SIM card.
- Insert the 4G SIM card into the SIM card slot of the device. Please pay attention to the instructions near the SIM card slot.
- The SIM card slot supports Nano SIM cards. If the SIM card is of another size, please adjust it.
- If you need to replace the SIM card, please turn off the device power first to prevent damage to the SIM card. 1.2 Switch on the power supply.
- Please use the original factory standard power adapter to power the wireless router, plug it into the power source, and wait for a while, because the device will take some time to start.
After starting, the power indicator and Wi-Fi indicator are always on. - After successfully registering for the network, the network indicator will always be on. Then, you can use computers, mobile phones and other terminals to connect to this machine through Wi-Fi (Wi-Fi name you can refer to the sticker on the body of the router) or a network cable to go online.
Kanfigareshan na'ura mai ba da hanya tsakanin hanyoyin sadarwa
- Set the computer’s IP address
- Kafin shiga cikin Web setting page, it is recommended that you set your computer to ‘jobtain an IP address automatically” and “obtain a DNS server address automatically”, and the router will assign an IP address automatically.
- If you need to manage and configure this router, you can connect to the 4G wireless router via wired and wireless. For Wi-Fi name, password and default gateway address, please refer to the sticker on the router body.
- These network parameters can be modified according to the actual situation, and the manual will show the default values.
Log on router configuration page
- Open your browser, enter the IP address on the label, and log in to the management page.
- In the login window popped out, type your username and password: admin, then click “Login”.
- Prompt: password of initial administrator is: admin; user can change administrator’s password after entering the configuration page.
- After inputting the correct password, you can enter the router’s WEB shafin daidaitawa.
Saitin Wi-Fi
- Click “Menu”–“Settings”–“Wi-Fi Settings” one by one,there will be interface of Wi-Fi settings as below.
- Wannan na'ura mai ba da hanya tsakanin hanyoyin sadarwa tana goyan bayan aikin daidaita sigogin bugun kira na 3G/4G ta atomatik.
- Automatic configuration of network dial-up parameters for most operators in the world. Special
- APN customization requirements. Please set the following steps:
Sett ing 3G/4G network
- Set the BAND manually
- By default, the CPE device automatically registers the 4G network based on the best choice.
- If the base station network signal is blocked or the network signal is poor, the best frequency band can be manually selected.
- At the top of the homepage, “Internet” “Band Settings” ‘T requency band selection Method” can be selected by selecting “Manualit to select 1 or more bands and then click “Save” to take effect!
Saitunan APN:
- Firstly, confirm the SIM card can work.
- Secondly, confirm that the 3G/4G dial-up settings of this router meet the local operator’s setup requirements.
The step is as below:
- Please click “Internet”–“APN Settings” on the homepage to expand and select -“APN Settings” button.Then select the Manual mode and click “Enable” to enter the user name, password, dialing number, APN parameter provided by 3G/4G ISP, click “Save”, Device restart takes effect.
Sake saiti
- During the reset process, the wireless router will restart and clean all the settings of the wireless router, then restore to the initial state.
- This function is generally used when the device is changed from one network environment to another different network environment-Restore the device to factory settings, and then reset it to suit the current networking.
- Please click “Router”–“Configuration Management” Restore Factory Settings”–“ok”, The router will automatically reboot and restore factory Settings
Takardu / Albarkatu
 |
DBIT DBIT TD-LTE WiFi6 na'ura mai ba da hanya tsakanin hanyoyin sadarwa 4G LTE Terminal Data mara waya [pdf] Jagoran Shigarwa DBIT TD-LTE WiFi6 na'ura mai ba da hanya tsakanin hanyoyin sadarwa 4G LTE Wireless Data Terminal, DBIT TD-LTE WiFi6, Router 4G LTE Wireless Data Terminal, Mara waya ta Data Terminal, Data Terminal. |