FREAKS da GEEKS T30 Wireless Nano Controller Manual

Samfurin Ƙarsheview:
Samfurin Nano Mai Kula da Mara waya ta T30 an tsara shi don amfani dashi Canja & PC. Yana fasalta ayyuka daban-daban kamar saitin Turbo, daidaitawar girgizar motar, da damar haɗin waya.

Umarnin Amfani da samfur

Haɗin Waya:

Kunna Sadarwar Waya ta Pro Controller a cikin Tsarin Saituna > Masu sarrafawa da Sensors.
Haɗa kebul na USB zuwa mai sarrafawa da na'ura wasan bidiyo.
Danna kowane maɓalli don kafa haɗin gwiwa. Lokacin da kebul ya kasance cire haɗin, mai sarrafawa zai koma yanayin Bluetooth.

Saitin Ayyukan Turbo:

Don kunna Turbo:

Riƙe maɓallin Turbo kuma danna maɓallin da ake so.
Saki maɓallin Turbo.
Riƙe maɓallin da aka sanya zai kwaikwayi saurin latsawa.
Latsa Turbo da maɓallin sake don kashewa.

Don daidaita Gudun Turbo:

Latsa Turbo + danna Dama Analog Stick sama don zagayowar ta gudun: 5 sau / na biyu - sau 12 / na biyu - sau 20 / sakan.
Latsa Turbo + danna Dama Analog Stick ƙasa don zagayowar ta gudu a baya: sau 20 / sakan - 12 sau / na biyu - 5 sau/na biyu.

Ayyukan Jijjiga Mota:
Mai sarrafawa yana ba da matakan 4 na ƙarfin girgiza don ƙarin gwanintar caca mai ban sha'awa. Kuna iya daidaita girgizar da hannu tsanani ta hanyar console. Matakan sune: 100% (tsoho), 70%, 30%, 0%.

Sake saita Mai Gudanarwa:
Idan mai sarrafa ku ba zai haɗa ko amsa da kyau ba, sake saita shi ta \ta amfani da ƙaramin kayan aiki don tura maɓallin sake saiti. Wannan zai haifar da mai sarrafawa don sake daidaitawa.

FAQ:

Q: Ta yaya zan daidaita ƙarfin jijjiga na mai sarrafawa?
A: Latsa Turbo + danna Hagu Analog Stick sama don ƙarawa tsanani, kuma latsa Turbo + tura Hagu Analog Stick zuwa rage ƙarfi.

Samfurin Ƙarsheview

Sigar Samfura

Cajin Voltage: DC 5.0V
Yanzu: Kusan 50mA
Barcin Mara: Kusan 10uA
Ƙarfin baturi: 800mAh
Lokacin Caji: Kusan awanni 2
Nauyi: 180 g
Nisa Wayar da Bluetooth 5.0: <10m
Jijjiga Yanzu: <25mA
Cajin Yanzu: Kusan 450mA
Lokacin Amfani: Kusan awanni 10
Lokacin jiran aiki: Kwanaki 30
Girma: 140 x 93.5 x 55.5 mm

Maballin Umarnin

Gamepad yana da maɓallan dijital guda 19 (UP, DOWN, HAGU, DAMA, A, B, X, Y, L1, R1, L2, R2, L3, R3, -, +, TURBO, GIDA, Screenshot) da analog na 3D joysticks guda biyu .

Haɗawa da Haɗawa

Haɗin kai tare da Console Canjawa:
- Mataki 1: Kunna na'ura mai ba da hanya tsakanin hanyoyin sadarwa, je zuwa Saitunan tsari> Yanayin jirgin sama> Haɗin Mai sarrafawa (Bluetooth)> Kunna.
- Mataki 2: Shigar da yanayin haɗin Bluetooth ta zaɓin Masu sarrafawa > Canja Riko/Oda. Na'urar wasan bidiyo za ta nemo masu sarrafa guda biyu.
- Mataki 3: Latsa ka riƙe maɓallin «HOME» akan mai sarrafa na tsawon daƙiƙa 3/5. LED1, LED2, LED3, da LED4 za su yi haske da sauri. Da zarar an haɗa, mai sarrafawa zai yi rawar jiki.

Haɗin Waya:
- Mataki 1: Kunna Sadarwar Waya ta Pro Controller a cikin Saitunan Tsarin> Masu sarrafawa da na'urori masu auna firikwensin.
- Mataki 2: Haɗa kebul na USB zuwa mai sarrafawa da na'ura wasan bidiyo. Danna kowane maɓalli don kafa haɗin gwiwa. Lokacin da aka cire haɗin kebul ɗin, mai sarrafawa zai koma yanayin Bluetooth.
Yanayin PC (Windows):
Kashe mai sarrafawa kuma haɗa shi zuwa PC tare da kebul na Type-C na USB. Windows za ta shigar da direba ta atomatik. LED2 zai haskaka lokacin da aka haɗa mai sarrafawa. Sunan nuni zai zama "Xbox 360 Controller for Windows."

Saitin Aiki na TURBO

Kunna Turbo:

Riƙe maɓallin Turbo kuma danna maɓallin da ake so. Saki maɓallin Turbo. Yanzu, riƙe maɓallin da aka sanya zai kwaikwayi saurin latsawa. Danna Turbo da maɓallin sake don kashewa.
Ana iya sanya aikin Turbo zuwa maɓallai masu zuwa: A, B, X, Y, L1, L2, R1, R2, L3, R3.

Daidaita Gudun Turbo:

Latsa Turbo + danna Dama Analog Stick don sake zagayowar ta cikin sauri: sau 5 / na biyu - sau 12 / na biyu - sau 20 / na biyu.
Latsa Turbo + danna Dama Analog Stick ƙasa don sake zagayowar ta cikin sauri a baya: sau 20/na biyu - sau 12/na biyu - sau 5/daƙiƙa.

Ayyukan Jijjiga Mota

Matakan 4 na ƙarfin girgiza suna ba ku damar daidaita ƙwarewar girgizawa don ƙarin wasan bidiyo na zahiri, zaku iya kunna rawar motsin mai sarrafa da hannu ta hanyar na'ura wasan bidiyo. Akwai matakan 4: 100% (tsoho), 70%, 30%, 0%.

Daidaita Ƙarfin Jijjiga:

Latsa Turbo + danna Hagu Analog Stick sama don ƙara ƙarfi.

Latsa Turbo + danna Hagu Analog Stick ƙasa don rage ƙarfi.

Sake saitin Mai Gudanarwa

Idan mai sarrafa ku ba zai haɗa ba, ba da amsa, ko yana walƙiya ta kuskure, sake saita shi ta amfani da ƙaramin kayan aiki don tura maɓallin sake saiti. Wannan zai sa mai sarrafawa ya sake daidaitawa.

Kunshin Ya Haɗa

Matsayi	Bayani
Ƙarfi kashe	Latsa ka riƙe maɓallin GIDA na daƙiƙa 5 har sai an kashe masu nuni. • Idan sake haɗawa ya gaza bayan daƙiƙa 30, mai sarrafawa zai kashe. • Idan ba ya aiki na mintuna 5, mai sarrafawa zai shiga yanayin barci.
Cajin	• Lokacin caji yayin da aka kashe, alamun LED za su yi haske kuma su kashe da zarar an cika caji. • Lokacin caji yayin da aka haɗa, LED ɗin zai yi walƙiya kuma ya kasance da ƙarfi lokacin da aka cika cikakken caji.
Ƙananan baturi Ƙararrawa	• Lokacin da baturi ya yi ƙasa, alamar LED za ta yi haske. LED ɗin zai kasance da ƙarfi da zarar an cika caji.

Gargadin Tsaro

Yi amfani da kebul ɗin caji da aka kawo kawai don cajin wannan samfurin.
Idan kun ji sautin tuhuma, hayaki, ko wari mai ban mamaki, daina amfani da wannan samfur.

Kada a bijirar da wannan samfur ko baturin da ke ƙunsa zuwa microwaves, yanayin zafi mai zafi, ko hasken rana kai tsaye.
Kada ka bari wannan samfurin ya sadu da ruwa ko rike shi da rigar hannu ko maiko. Idan ruwa ya shiga ciki, daina amfani da wannan samfurin

Kada ka sanya wannan samfur ko baturin da ke ƙunsa zuwa wuce gona da iri.
Kar a ja kebul ɗin ko lanƙwasa shi sosai.

Kar a taɓa wannan samfurin yayin da yake yin caji yayin tsawa.
A kiyaye wannan samfur da marufinsa daga inda yara ƙanana ba za su iya isa ba. Ana iya shigar da abubuwan tattarawa. Kebul na iya nannade wuyan yara.
Mutanen da ke da rauni ko matsala tare da yatsu, hannaye, ko hannaye bai kamata su yi amfani da aikin jijjiga ba
Kada kayi ƙoƙarin kwance ko gyara wannan samfur ko fakitin baturi.
Idan ko ɗaya ya lalace, daina amfani da samfurin.
Idan samfurin ya ƙazantu, shafa shi da laushi, bushe bushe. Ka guji amfani da sirara, benzene, ko barasa.

Bayanan tsari

Zubar da batura da aka yi amfani da su da kayan aikin lantarki da na lantarki

Wannan alamar da ke kan samfurin, baturansa, ko marufi na nuna cewa samfurin da baturan da ke ƙunsa ba dole ba ne a zubar da sharar gida. Alhakin ku ne ku jefar da su a wurin da ya dace don sake sarrafa batura da kayan wuta da lantarki. Tara daban-daban da sake yin amfani da su suna taimakawa wajen adana albarkatun ƙasa da kuma guje wa mummunan tasiri ga lafiyar ɗan adam da muhalli saboda yuwuwar kasancewar abubuwa masu haɗari a cikin batura da kayan lantarki ko na lantarki, waɗanda za a iya lalacewa ta hanyar zubar da ba daidai ba. Don ƙarin bayani kan zubar da batura da sharar lantarki da lantarki, tuntuɓi karamar hukumar ku, sabis ɗin tattara sharar gida, ko shagon da kuka sayi wannan samfur. Wannan samfurin na iya amfani da baturan lithium, NiMH, ko alkaline.

Sanarwa Da Daidaitawa

Sauƙaƙe Sanarwa na Ƙarfafawa na Tarayyar Turai:
Masu cin kasuwa a nan suna bayyana cewa wannan samfurin ya dace da mahimman buƙatun da sauran tanade-tanaden Dokokin EMC 2011/65/UE, 2014/53/UE, 2014/30/UE. Ana samun cikakken rubutun sanarwar Ƙa'ida ta Turai akan mu website www.freaksandgeeks.fr

Kamfanin: Kasuwancin Invaders SAS
Adireshi: 28, Avenue Ricardo Mazza Saint-Thibéry, 34630
Ƙasa: Faransa
sav@trade-invaders.com.

Ƙungiyoyin mitar rediyo masu aiki na T30 da madaidaicin iko sune kamar haka: 2.402 zuwa 2.480 GHz, MAXIMUM: <10dBm (EIRP).

Takardu / Albarkatu

FREAKS da GEEKS T30 Mai Kula da Nano Mara waya [pdf] Manual mai amfani
T30 Mai Kula da Nano Mara waya, T30, Mai Kula da Nano Mara waya, Mai Kula da Nano, Mai Gudanarwa

Magana

Manual mai amfani

FREAKS da GEEKS T30 Mai Kula da Nano Mara waya