Changzhou Sciwil E-Mobility Technology Co., Ltd.
Hanyar Huashan ta 9, Changzhou, Jiangsu, China- 213022
Fax: +86 519-85602675 Tel: +86 519-85600675
JAGORANCIN MAI AMFANI
Saukewa: S830-LCD
Gabatarwa
Taya murna akan siyan nunin wayo na e-bike. Kafin amfani, da fatan za a karanta ta wannan jagorar. Yana da mahimmanci don tabbatar da duk abubuwan GARGADI, BAYANIN TSIRA DA UMARNI. Wannan jagorar za ta bi ku ta hanyar haɗuwa, saiti da ayyukan samfuran nunin Sciwil a cikin matakai masu sauƙi, don sauƙaƙe ayyuka akan keken e-bike ɗin ku.
1. Bayanan Tsaro
Da fatan za a yi hattara lokacin da USEDO KADA KA toshe ko cire nunin yayin da ake ikon E-Bike ɗin ku.
KA GUJI RASHIN KARO KO TUNANIN ZUWAN NUNA.
KAR KU YAGA FILM MAI RUWAN RUWAN A SAURAN ALAMOMIN, IN BA haka ba, RUWAN RUWAN YANA IYA RASHI.
NUNA MATSALAR RUWA: IP6
BA A SHAWARAR GYARA BA DA IZININ GINDI GA SIFFOFIN TSOHON BA, IN BA haka ba, BA ZA A IYA GIRMAN AMFANI DA KEKI NA AL'ADA BA.
LOKACIN NUNA NUNA BAYAYI AIKI DAIDAI, DON ALLAH A AIKA SHI DON INGANTACCEN GYARA A LOKACI.
2. Majalisa
Gyara nuni akan sandar hannu, daidaita shi zuwa kusurwar fuskantar da ta dace. Tabbatar cewa babur ɗin ku na e-bike yana kashewa, sannan toshe haɗin haɗin kan nuni zuwa mai haɗawa akan mai sarrafawa (bas) don gama daidaitaccen taro.
3. Girman Samfur
Kayan abu
Abubuwan Shell: ABS
Abun Rufin allo: Babban Hardness Acrylic (tauri ɗaya kamar gilashin zafi).
Zazzabi Aiki: -20°C ~ 60°C.
Girman samfur
4. Aiki Voltage da Haɗi
4.1 Voltage
DC 24V-60V mai jituwa (ana iya saitawa akan nuni) wasu voltage matakin za a iya musamman.
4.2 Haɗi
Mai Haɗi zuwa Mai Haɗin Wuta na Kebul na Nuni
Nuna Mai Haɗin Haɗin Cable
Daidaitaccen Tsarin Haɗin Haɗi
|
Jeri A'a. |
Launin Waya | Ayyuka |
| 1 | Red (VCC) |
Nuna Wutar Lantarki |
|
2 |
Blue (K) | Cable Power Controller |
| 3 | Baki (GND) |
Nuna Cable Ground |
|
4 |
Green (RX) | Nuna Waya Mai Karɓar Bayanai |
| 5 | Yellow (TX) |
Nuna Waya Aika Data |
Lura: Wasu samfura na iya amfani da masu haɗin ruwa mai hana ruwa, wanda a halin da ake ciki ba za a iya gano shirye-shiryen waya na ciki daga waje ba.
Ayyuka 5 da Kushin Maɓalli
5.1 Ayyuka
Akwai abubuwa da yawa da aka nuna akan S830 kamar haka:
- Matsayin baturi
- Gudu (matsakaici, matsakaicin, gudun yanzu)
- Nisa (Tafiya ɗaya, jimlar ODO)
- Babban darajar PAS
- Alamar Kuskure
- Jirgin ruwa
- Birki
- Alamar Haushi
5.2 Sarrafa da Saita Abubuwan
Canja Wuta, Canja Haske, Yanayin Tafiya, Jirgin ruwa na ainihi, Saitin Girman Dabaru, Saitin PWM Level, Saitin Iyakan Gudun, Saitin Kashe Kai-da-kai.
5.3 Wurin Nuni
Gabaɗaya Interface (an nuna a cikin 1s a farkon
Gabatarwar Abubuwan da Aka Nuna:
- Hasken gaba
- Matsayin baturi
- Yanki mai yawa
Digital Voltage: VOL, Jimlar Nisa: ODO, Tafiya Guda Daya: TAFIYA, Lokacin Hawa: Lokaci, - Gudun Yanzu: CUR, Matsakaicin Gudun: MAX, Matsakaicin Gudun: AVG (km/h ko mph)
Nunin yana ƙididdige saurin hawan doki bisa girman dabaran da sigina (buƙatar saita lambobin maganadisu don injinan Hall). - Wurin Nuna Kuskure
- Yankin Alamar Matsayin PAS
5.4 Saituna
P01: Hasken Baya (1: mafi duhu; 3: mafi haske)
P02: Nisan Mileage (0: km; 1: mil)
P03: Voltage Class (24V / 36V / 48V / 60V / 72V)
P04: Lokacin Kashe Auto
(0: taba, wata ƙima tana nufin tazarar lokaci don nunin kashewa ta atomatik) Raka'a: minti
P05: Matakin Taimakawa Fedal
0/3 Yanayin Gear: Gear 1-2V, Gear 2-3V, Gear 3-4V
Yanayin Gear 1/5: Gear 1-2V, Gear 2-2.5V, Gear 3-4V, Gear 4-3.5V, Gear 5-4V
P06: Girman Dabaran (Raka'a: Daidaitaccen inch: 0.1)
P07: Lambar Magnets na Motoci (don Gwajin Gudun Gudun; Rage: 1-100)
P08: Iyakar Gudun Gudun: 0-50km/h, babu iyaka gudun idan an saita zuwa 50)
1. Matsayin sadarwa (mai sarrafawa)
Za a kiyaye saurin tuƙi akai a matsayin ƙima mai iyaka.
Ƙimar Kuskure: ± 1km/h (wanda ya dace da yanayin PAS/maƙura)
Lura: Ana auna ƙimar da aka ambata a sama ta hanyar awo (kilomita).
Lokacin da aka saita naúrar aunawa zuwa naúrar masarauta (mil), saurin da aka nuna akan panel ɗin za a canza shi ta atomatik zuwa naúrar masarauta mai dacewa, duk da haka ƙimar iyakar saurin gudu a cikin naúrar masarauta ba zai canza daidai ba.
P09: Saitin Farawa Kai tsaye / Buga-zuwa-Fara
0: Farawa Kai tsaye
1: Buga-zuwa-Farawa
P10: Saitin Yanayin Tuƙi
0: Taimakon Taimako - Takamammen kayan aikin injin taimakon yana yanke ƙimar ƙarfin taimako. A wannan halin da ake ciki, magudanar ba ya aiki.
1: Wutar Lantarki - Motar da maƙarƙashiya ke tuka motar. A cikin wannan hali na'urar wutar lantarki ba ta aiki.
2: Taimakon Taimako + Wutar Lantarki - Turin lantarki baya aiki a matsayin farawa kai tsaye.
P11: Ƙwararren Taimakon Taimako (Range: 1-24)
P12: Taimakon Taimakawa Fara Ƙarfi (Range: 0-5)
P13: Lambar Magnets a cikin Fitilar Taimakon Sensor (5/8/12pcs)
P14: Ƙimar Iyaka ta Yanzu (12A ta tsohuwa; Range: 1-20A)
P15: Ba a bayyana ba
P16: Farashin ODO
Latsa ka riƙe maɓallin sama na tsawon daƙiƙa 5 kuma za a share nisan ODO.
5.5 Sadarwar Sadarwa: UART
5.6 Maɓallin Maɓalli
Matsayin kushin maɓalli:
Akwai maɓallai 3 akan nunin S830. A cikin gabatarwar masu zuwa:
ana kiranta "A kunne/Kashe",
ana kiransa "Plus",
ana kiranta "Minus".
Ayyuka sun haɗa da gajeren latsa, latsa ka riƙe maɓalli ɗaya ko maɓallai biyu
- Yayin hawan, danna Plus ko Rage don canza matakin PAS/matsi.
- Yayin hawan, latsa Kunnawa/Kashe don canza abubuwa da aka nuna a wuri mai ma'ana.
Lura: Latsa ka riƙe maɓalli ɗaya galibi ana amfani dashi don yanayin sauyawa/kunnawa/kashe
matsayi. Latsa ka riƙe maɓallai biyu ana amfani da su don saitunan sigogi.
(Don guje wa aiki na karya, ba a gabatar da gajeriyar latsa maɓalli biyu ba.)
Ayyuka:
- Kunnawa/Kashe Nuni
– Latsa ka riƙe Kunnawa/Kashe don kunnawa ko kashe nunin.
- Lokacin da nuni yana kunne amma a tsaye yana ƙarƙashin 1A, nunin zai kashe ta atomatik bayan mintuna 10 (ko kowane lokacin saita ta P04). - Shigar/Fita Yanayin Tafiya, Yanayin Cruise kuma Kunna Fitilar Kai:
– Lokacin da keken e-bike ɗin ku ya tsaya, latsa ka riƙe Minus don shigar da yanayin tafiya na 6km/h.
– Yayin hawan, latsa ka riƙe Minus don shigar da jirgin ruwa na ainihi. Lokacin cikin yanayin tafiye-tafiye, latsa ka riƙe Minus don fita.
- Latsa ka riƙe Plus don 3s don kunna/kashe fitilun mota. - Canja Abubuwan da Aka Nuna a Wurin Mahimmanci
Lokacin da nuni ke kunne, danna Kunnawa/Kashe don canza abubuwan da aka nuna a wuri mai ma'ana. - Saituna
- Latsa ka riƙe Plus da Rage don shigar da saiti. Saitunan abubuwan sun haɗa da: Hasken Baya, Raka'a, Voltage Level, Lokacin Kashe Kai tsaye, Matsayin PAS, Girman Dabarar, Lambobin Magnet na Mota, Iyakar Gudun Gudu, Fara kai tsaye da Yanayin Harba-zuwa Fara, Yanayin Tuƙi, Hankalin PAS, Ƙarfin Farawa na PAS, Nau'in Sensor PAS, Iyakar Mai Sarrafa Yanzu, ODO sallama, da sauransu.
- A cikin Saituna, danna Kunnawa / Kashe don canza abubuwan saitin da ke sama; latsa Plus ko Rage don saita sigogi don abu na yanzu. Ma'aunin zai lumshe bayan saita, danna Kunnawa/Kashe Zuwa abu na gaba kuma za'a adana siga na baya ta atomatik.
- Latsa ka riƙe Plus da Rage don fita Saiti, ko jiran aiki na 10s don ajiyewa da fita.
5.7 Kuskuren Code
| Lambar Kuskure (Decimal) | Alamu | Lura |
| 0 | Na al'ada | |
| 1 | Ajiye | |
| 2 | Birki | |
| 3 | Kuskuren Sensor PAS (alamar hawa) | Ba a Gane ba |
| 4 | Yanayin Tafiya 6km/h | |
| 5 | Real-Time Cruise | |
| 6 | Ƙananan Baturi | |
| 7 | Kuskuren Mota | |
| 8 | Kuskuren magudanar ruwa | |
| 9 | Kuskuren Mai Gudanarwa | |
| 10 | Kuskuren Karɓar Sadarwa | |
| 11 | Kuskuren Aika Sadarwa | |
| 12 | Kuskuren Sadarwar BMS | |
| 13 | Kuskuren fitillu |
5.8 Serial Code
Kowane samfurin nuni na Sciwil yana ɗauke da Serial Code na musamman akan harsashi na baya (kamar yadda aka nuna a hoton da ke ƙasa): 192 2 1 210603011
Bayani ga Serial Code na sama:
192: Lambar abokin ciniki
2: Lambar yarjejeniya
1: Ana iya soke shirin (0 yana nufin ba za a iya soke shi ba)
210603011: PO (lambar odar siyayya)
6 Quality da Garanti
A cikin yarda da dokokin gida da amfani na yau da kullun, ƙayyadadden lokacin garanti ya ƙunshi watanni 24 bayan ranar masana'anta (kamar yadda lambar serial ta nuna).
Ba za a canja wurin iyakataccen garanti zuwa wani ɓangare na uku ba kamar yadda aka ƙayyade a cikin yarjejeniya tare da Sciwil.
Ana iya rufe wasu yanayi, dangane da yarjejeniya tsakanin Sciwil da mai siye.
Ware Garanti:
- Sciwil kayayyakin da aka gyara ko gyara ba tare da izini ba
- Kayayyakin Sciwil waɗanda aka yi amfani da su don haya, aikace-aikacen kasuwanci, ko gasa
- Lalacewar da ke fitowa daga sanadi ban da lahani a cikin kayan aiki ko masana'antu, gami da amma ba'a iyakance ga haɗari, sakaci, haɗuwa mara kyau, gyare-gyare mara kyau, canjin kulawa, gyare-gyare, lalacewa ta al'ada ko rashin amfani.
- Lalacewa saboda rashin dacewar sufuri ko ajiya mai siye, da lalacewa yayin jigilar kaya (ya kamata a tantance wanda ke da alhakin ta amfani da dokokin INCOTERMS).
- Lalacewa a saman bayan barin masana'anta, gami da harsashi, allo, maɓalli, ko wasu sassan bayyanar.
- Lalacewar wayoyi da igiyoyi bayan barin masana'anta, gami da karyewa da karce na waje.
- Rashin gazawa saboda daidaitaccen tsarin mai amfani ko canje-canje mara izini a cikin sigogin na'urorin haɗi masu dacewa, ko yin gyara ta masu amfani ko ɓangare na uku.
- Lalacewa ko asara saboda karfin majeure.
- Bayan lokacin garanti.
Shafin 7
Wannan jagorar mai amfani da nuni yana dacewa da sigar software na gaba ɗaya (V1.0) na Changzhou Sciwil E-Mobility Technology Co., Ltd. dangane da ainihin sigar da ake amfani da ita.
Takardu / Albarkatu
 |
Bayani na SCIWIL S830-LCD [pdf] Jagorar mai amfani S830-LCD Cibiyar Tallace-tallace ta S830-LCD |
