PR 1KRF dimLED Mai Kula da LED Launi ɗaya
Ƙayyadaddun bayanai
- Product Name: 069001 dimLED PR 1KRF
- Type: Single Color LED Controller
- Dimming Levels: 4096 levels, 0-100%
- Control Method: RF 2.4G single zone or multiple zone dimming
m iko - Nisan Sarrafa: Har zuwa 30m
- Shigar da VoltagSaukewa: 5-36VDC
- Shigarwa na yanzu: 8.5A
- Fitarwa VoltagSaukewa: 5-36VDC
- Output Current: 1CH, 8A
- Output Power: 40W/96W/192W/288W (5V/12V/24V/36V)
- Nau'in fitarwa: Constant voltage
- Girman Kunshin: L114 x W38 x H26mm
- Babban Nauyin: 0.052kg
- Zazzabi na Aiki: -30°C zuwa +55°C
- Yanayin Yanayin (Max.): +85°C
- Adireshin IP: IP20
Umarnin Amfani da samfur
Shigarwa
1. Shiri Waya:
Ensure terminals are tightly secured to prevent high contact
point resistance and terminal burnout.
Tsarin Waya:
Ikon Nesa Match:
User can choose between two ways to match or delete remotes:
- Using the controller’s Match key:
- – Short press match key, then immediately press on/off key
(single zone remote) or zone key (multiple zone remote) on the
m. - – LED indicator will fast flash a few times to indicate
wasan nasara.
- – Switch off the power of the receiver, then switch on power,
sake maimaitawa. - – Immediately short press on/off key (single zone remote) or
zone key (multiple zone remote) 3 times on the remote. - – The light blinks 3 times to confirm successful match.
Tambayoyin da ake yawan yi (FAQ)
Tambaya: Nawa masu sarrafa nesa za a iya haɗa su da RF ɗaya
mai sarrafawa?
A: Mai sarrafa RF ɗaya zai iya karɓar sarrafa nesa guda 10.
Q: What is the dimming range of the controller?
A: The dimming range is from 0-100% smoothly without any
kyalli.
069001 dimLED PR 1KRF
Mai Kula da LED Launi ɗaya
4096 levels 0-100% dimming smoothly without any ash. Match with RF 2.4G single zone or multiple zone dimming remote control. One RF controller accept up to 10 remote control. Auto-transmitting function: Controller automatically transmit signal to another controller
with 30m control distance. Synchronize on multiple number of controllers. Connect with external push switch to achieve on/off and 0-100% dimming function. Light on/off fade time 3s selectable. Over-heat / Over-load / Short circuit protection, recover automatically.
Farashin DIM
JAN
1 Channel / Step-less dimming / Wireless remote control / Auto-transmitting / Synchronize / Push Dim / Multiple protection
Ma'aunin Fasaha
Input da Fitar Shigar voltage Input halin yanzu Fitowa voltage Fitar halin yanzu
Ƙarfin fitarwa
Output type Package Size Gross weight
5-36VDC 8.5A 5-36VDC 1CH,8A 40W/96W/192W/288W (5V/12V/24V/36V) Constant voltage
L114 x W38 x H26mm 0.052kg
Dimming data Input signal Control distance Dimming gray scale Dimming range Dimming curve PWM frequency
Muhalli Yanayin zafin aiki Case (Max.) ƙimar IP
RF 2.4GHz + Push Dim 30m(Barrier-free space) 4096 (2^12) levels 0 -100% Logarithmic 2000Hz (default)
Ta: -30 OC ~ +55 OC Tc: +85 OC IP20
Tsaro da EMC EMC misali
Safety standard Radio Equipment Certi cation Warranty and Protection Warranty
Kariya
ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 61347-1:2015+A1:2021 EN 61347-2-13:2014+A1:2017 ETSI EN 300 328 V2.2.2
CE RED
3 years Reverse polarity Over-heat Over-load Short circuit
Tsarin Injini da Shigarwa
LED indicator Push switch com
Push switch in Installation rack Match key
LED output LED output + Power input Power input +
Rigar shigarwa
33mm ku
97mm 18mm
Match Remote Control (hanyoyin wasa biyu)
Mai amfani na ƙarshe zai iya zaɓar dacewa dacewa/share hanyoyin. Ana ba da zaɓuɓɓuka biyu don zaɓi:
Yi amfani da maɓallin Match na mai sarrafawa
Yi amfani da Sake kunna wuta
Match: Shortan maɓallin wasa, danna maɓallin kunnawa/kashe nan da nan (mai nisa na yanki ɗaya) ko maɓallin yanki (maɓallin yanki da yawa) akan ramut. Alamar LED mai saurin walƙiya ƴan lokuta yana nufin wasa yayi nasara.
Match: Kashe wutar mai karɓa, sannan kunna wuta, sake maimaitawa. Nan da nan gajeriyar danna maɓallin kunnawa/kashe (mai nisa na yanki ɗaya) ko maɓallin yanki (mai nisan yanki da yawa) sau 3 akan ramut. Hasken yana kiftawa sau 3 yana nufin wasa yayi nasara.
Delete: Press and hold match key for 5s to delete all match, the LED indicator fast flash a few times means all matched remotes were deleted.
Share: Kashe wutar mai karɓa, sannan kunna wuta, sake maimaitawa. Nan da nan gajeriyar maɓallin kunnawa/kashe (mai nisa na yanki ɗaya) ko maɓallin yanki (mai nisan yanki da yawa) sau 5 akan ramut. Hasken yana lumshe ido sau 5 yana nufin an share duk abubuwan da suka dace.
Littafin Mai Amfani Ver 1.1.6 2024.9
Shafi na 1
Tsarin Waya
FITARWA
Tura Sauyawa
RF nesa
PUSH-DIM GND PUSH
PUSH-DIM GND PUSH
LED Controller LED Controller
FITARWA
Saukewa: 5-36VDC
Fitilar LED mai launi ɗaya
+
Fitilar LED mai launi ɗaya
+
Samar da Wutar Lantarki 5-36VDC Constant Voltage
Saukewa: AC100-240V
Saukewa: 5-36VDC
Shirye-shiryen Waya:
1. The wiring can be solid or stranded with a cross-sectional area of 0.5 to 2.5 mm². Conventional 1mm² can withstand 10A output current.
2. When wiring is installed, the terminals must be tightened. If they are not tightened, the contact point resistance will be too high and the terminals will easily burn due to heat when used at full load for a long time.
Lura: Ƙarfin fitarwa na dindindin voltage ya kamata samar da wutar lantarki ya zama aƙalla sau 1.2 fiye da na abin da ake fitarwa (fitilar haske), in ba haka ba cikakken ƙarfin wutar lantarki na iya haifar da firgita ta atomatik ko girgiza hasken.
Tura Dim Aiki
The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switchs. Short press: Turn on or off light. Long press (1-6s): Press and hold to step-less dimming, With every other long press, the light level goes to the opposite direction. Dimming memory: Light returns to the previous dimming level when switched off and on again, even at power failure. Synchronization: If more than one controller are connected to the same push switch, do a long press for more than 10s,then the system is synchronized and all lights
in the group dim up to 100%. This means there is no need for any additional synchrony wire in larger installations.We recommend the number of controllers connected to a push switch does not exceed 25 pieces, The maximum length of the wires from push to controller should be no more than 20 meters.
Mingwanƙwasa Diming
Lokacin kunnawa/kashe haske
Aikin PWM(%)
100
Gamma=1.6
90 80 70 60 50 40 30 20 10
10 20 30 40 50 60 70 80 90 100
Haskaka(%)
Binciken Malfunctions & Shirya matsala
Dogon latsa maɓallin matches 5s, sannan gajeriyar danna maɓallin wasa sau 3, lokacin kunnawa / kashewa za'a saita zuwa 3s, hasken mai nuna alama yana ƙiftawa sau 3.
Dogon latsa maɓallin wasa na 10s, maido da tsoffin ma'auni na masana'anta, lokacin kunnawa/kashe kuma yana mayar da shi zuwa 0.5s.
Malfunctions Babu haske
Rashin daidaituwa tsakanin gaba da baya, tare da voltagda drop
Babu amsa daga nesa
Causes 1. Nopower . 2. Wrongconnection or insecure . 1. Output cable is too long. 2. Wire diameter is too small. 3. Overload beyond power supply capability. 4. Overload beyond controller capability.
1. Baturi bashi da iko. 2. Bayan nesa mai iya sarrafawa. 3. Mai sarrafawa bai dace da remote ba.
Shirya matsala 1. Duba wutar lantarki. 2. Duba haɗin. 1. Rage na USB ko madauki wadata. 2. Canja waya mai fadi. 3. Sauya wutar lantarki mafi girma. 4. Ƙara mai maimaita wuta.
1. Sauya baturi. 2. Rage nesa nesa. 3. Sake daidaita da remote.
Kariyar Shiga
1. The products shall not be stacked, the distance should be 20cm, so as not to affect lifespan of the products due to poor heat dissipation. 2. The product shall not be installed close to the switching power supply with an interval of 20cm to avoid radiation interference of the switching power supply. 3. The installation height shall be 1m from the oor to avoid shortening the remote control distance due to too weak reception signal. 4. The products are not allowed to be close to or covered by metal objects, with an interval of 20cm to avoid signal attenuation and shorten the remotedistance. 5. Avoid installation at the corner of the wall or the corner of the beam, with an interval of 20cm to avoid signal interference.
Littafin Mai Amfani Ver 1.1.6 2024.9
Shafi na 2
Takardu / Albarkatu
 |
T-LED PR 1KRF dimLED Single Color LED Controller [pdf] Littafin Mai shi 069001, PR 1KRF, PR 1KRF dimLED Single Color LED Controller, PR 1KRF, dimLED Single Color LED Controller, Single Color LED Controller, Color LED Controller, LED Controller |