LS GDL-D22C Mai Kula da Hankali Mai Shirye

Umarnin Amfani da samfur

• Kada a tuntuɓi tashar yayin amfani da wutar.
• Tabbatar cewa babu wasu abubuwan ƙarfe na waje.
• Kada a sarrafa baturin (caji, tarwatsa, bugawa, gajere, siyarwa).
• Tabbatar duba ƙimar ƙimatage da tsarin tasha kafin wayoyi.
• Lokacin yin wayoyi, ƙara ƙara dunƙule toshewar tashar tare da ƙayyadadden kewayon juzu'i.
• Kada a shigar da abubuwa masu ƙonewa a cikin kewaye. Kada kayi amfani da PLC a cikin mahalli tare da girgiza kai tsaye.
• Sai dai ma'aikatan sabis na ƙwararru, kar a tarwatsa, gyara, ko gyara samfurin.
• Yi amfani da PLC a cikin mahallin da ya dace da ƙayyadaddun bayanai da ke ƙunshe a cikin wannan takardar bayanan.
• Tabbatar cewa nauyin waje bai wuce ƙimar samfurin fitarwa ba.
• Lokacin zubar da PLC da baturi, ɗauki shi azaman sharar masana'antu. Za a yi wa siginar I/O ko layin sadarwa aƙalla 100mm nesa da babban ƙarfin wutatage na USB ko layin wuta.
• Ya kamata a yi aiki da PLC a cikin kewayon zafin jiki na -5°C zuwa 70°C da kewayon zafi na 5%RH zuwa 95%RH.
• Tabbatar cewa an sanya PLC a cikin yanayin da ba shi da girgiza kai tsaye da kayan wuta.

FAQ

• Tambaya: Zan iya amfani da PLC a cikin yanayi mai zafi?
  • A: PLC na iya aiki a cikin matakan zafi daga 5% RH zuwa 95% RH. Tabbatar da samun iska mai kyau da kariya daga magudanar ruwa.
• Tambaya: Ta yaya zan zubar da PLC da baturin ta?
  • A: Lokacin zubar da PLC da baturi, ɗauki su azaman sharar masana'antu bisa ga ƙa'idodin gida. Kada a zubar da su a cikin sharar gida na yau da kullun.
• Tambaya: Menene shawarar nisa don haɗa siginar I/O ko layin sadarwa?
  • A: Sigina na I/O na waya ko layin sadarwa aƙalla 100mm nesa da babban ƙarfin wutatage igiyoyi ko layukan wuta don hana tsangwama ko lalacewa.

Jagoran Shigar Mai Sarrafa Hankali Mai Shirye-shirye

• Smart IO Dnet GDL-D22C,D24C,DT4C/C1 GDL-TR2C/C1,TR4C/C1,RY2C

Wannan jagorar shigarwa yana ba da bayanin aiki mai sauƙi ko sarrafa PLC. Da fatan za a karanta a hankali wannan takaddar bayanan da littafin jagora kafin amfani da samfuran. Musamman karanta taka tsantsan sannan sarrafa samfuran yadda yakamata.

Kariyar Tsaro

• Ma'anar lakabin gargaɗi da taka tsantsan

GARGADI yana nuna haɗarin haɗari wanda, idan ba a guji shi ba, na iya haifar da mutuwa ko rauni mai tsanani
HANKALI yana nuna yanayi mai haɗari wanda, idan ba a kauce masa ba, zai iya haifar da ƙananan rauni ko matsakaici. Hakanan ana iya amfani dashi don faɗakar da ayyuka marasa aminci

GARGADI

① Kar a tuntuɓi tashoshi yayin da ake amfani da wutar lantarki. ② Tabbatar cewa babu wasu abubuwan ƙarfe na waje. ③ Kar a sarrafa baturin (caji, tarwatsa, bugawa, gajere, siyarwa).

HANKALI

① Tabbatar duba rated voltage da tsarin tasha kafin wayoyi ② Lokacin da ake yin wayoyi, ƙara ƙara dunƙule toshewar tashar tare da ƙayyadadden kewayon juzu'i ③ Kada a sanya abubuwa masu ƙonewa a kewaye ④ Kada kayi amfani da PLC a cikin yanayin girgiza kai tsaye ⑤ Ban da ma'aikatan sabis na ƙwararru, kar a sake haɗa gyara, ko gyara samfurin ⑥ Yi amfani da PLC a cikin yanayin da ya dace da ƙayyadaddun ƙayyadaddun bayanai da ke ƙunshe a cikin wannan takaddar bayanan. ⑦ Tabbatar cewa nauyin waje bai wuce ƙimar samfurin fitarwa ba. ⑧ Lokacin zubar da PLC da baturi, ɗauki shi azaman sharar masana'antu. ⑨ Siginar I/O ko layin sadarwa za a yi waya da shi aƙalla 100mm nesa da babban ƙarfin wuta.tage USB ko layin wuta.

Yanayin Aiki

• Don shigarwa, kiyaye sharuɗɗan da ke ƙasa.

A'a	Abu	Ƙayyadaddun bayanai					Daidaitawa
1	Nau'in yanayi	0 ~ 55 ℃					–
2	Yanayin ajiya.	-25 ~ 70 ℃					–
3	Yanayin yanayi	5 ~ 95% RH, mara sanyaya					–
4	Yanayin ajiya	5 ~ 95% RH, mara sanyaya					–
5	Resistance Vibration	Jijjiga lokaci-lokaci				–	–
		Yawanci	Hanzarta				Saukewa: IEC61131-2
		5≤f<8.4㎐	–		3.5mm ku	Sau 10 a kowace hanya domin X da Z
		8.4≤f≤150㎐	9.8 (1 g)		–
		Ci gaba da girgiza
		Yawanci	Yawanci	Yawanci
		5≤f<8.4㎐	–	1.75mm ku
		8.4≤f≤150㎐	4.9 (0.5 g)	–

Na'urorin haɗi da Ƙayyadaddun Kebul

• Duba Haɗin DeviceNet da ke haɗe zuwa tsarin
• Lokacin amfani da tashar sadarwar DeviceNet, za a yi amfani da kebul na DeviceNet tare da la'akari da nisa da sauri.

Rabewa	Kauri (class1)	Kauri (class2)	Bakin ciki (class2)	Magana
Nau'in	7897 A	3082 A	3084 A	Marubu: Belden
Nau'in Kebul	Zagaye			Ana amfani da layin gangar jiki da Drop lokaci guda
Impedance (Ω)	120
Yanayin zafin jiki (℃)	-20-75
Max. halattaccen halin yanzu (A)	8		2.4
Min. radius na curvature (inch)	4.4	4.6	2.75
Lambar waya mai mahimmanci	5 wayoyi

Girma

Girma (mm)

• Wannan shine sashin gaba na samfurin. Koma zuwa kowane suna lokacin aiki da tsarin. Don ƙarin bayani, koma zuwa littafin jagorar mai amfani.

LED cikakkun bayanai

Suna	Bayani
PWR	Nuna matsayin iko
MS	Nuna matsayin dubawa na tsarin sadarwa
NS	Yana nuna matsayin cibiyar sadarwa na tsarin sadarwa

Ƙayyadaddun Ayyuka

• Wannan shine ƙayyadaddun ayyuka na samfurin. Koma zuwa kowane suna lokacin tuƙi tsarin. Don ƙarin bayani, koma zuwa littafin mai amfani.

Abu	GDL-D2xC	GDL-DT4C/C1	GDL-TRC/C1	GDL-RY2C
Ƙididdigar shigarwa na Yanzu	5mA		–	–
Ma'aunin nauyi voltage	–	DC24V		DC24V/AC220V, 2A/Point, 5A/COM
Matsakaicin kaya	–	0.5A/Point, 3A/COM		DC 110V, AC 250V 1,200 sau / hour
ON Voltage	DC 19V ko sama da haka			Mafi ƙarancin kaya voltage/ na yanzu DC 5V/1mA
KASHE Voltage	DC 6V ko ƙasa da haka

Tsarin Toshe Tasha don Wayar I/O

• Wannan shine shimfidar toshe tasha don wayoyi na I/O.
• Koma zuwa kowane suna lokacin tuƙi tsarin.
• Don ƙarin bayani, koma zuwa littafin mai amfani.

Waya

Waya don Sadarwa

1. 5-pin connector (don haɗin waje)
   

   Signa	l Launi	Sabis	5 fil mai haɗawa
   DC 24V	(+) Ja	VDC
   CAN_	H Farin	Sigina
   Ruwan ruwa	Bare	Garkuwa
   CAN_	L Blue	Sigina
   DC 24V	(-) Baki	GND

2. Don ƙarin bayanin waya, koma zuwa littafin mai amfani.

Garanti

• Lokacin garanti shine watanni 36 daga ranar da aka yi.
• Ya kamata mai amfani ya gudanar da binciken farko na kurakurai. Koyaya, akan buƙata, LS ELECTRIC ko wakilanta zasu iya ɗaukar wannan aikin akan kuɗi. Idan aka gano dalilin laifin alhakin LS ELECTRIC ne, wannan sabis ɗin zai zama kyauta.
• Keɓancewa daga garanti
  • 1) Sauya sassa masu amfani da rayuwa (misali relays, fuses, capacitors, batura, LCDs, da sauransu.)
  • 2) Rashin gazawa ko lalacewa ta hanyar rashin dacewa ko mu'amala a wajen waɗanda aka ƙayyade a cikin littafin mai amfani
  • 3) Rashin gazawar abubuwan waje waɗanda basu da alaƙa da samfur
  • 4) Rashin gazawar da aka samu ta hanyar gyare-gyare ba tare da izinin LS ELECTRIC ba
  • 5) Amfani da samfurin ta hanyoyin da ba a yi niyya ba
  • 6) Kasawar da ba za a iya annabta / warware su ta hanyar fasahar kimiyya na yanzu a lokacin kerawa
  • 7) Rashin gazawa saboda abubuwan waje kamar wuta, mahaukaci voltage, ko bala'o'i
  • 8) Wasu lokuta waɗanda LS ELECTRIC ba ta da alhakin su
• Don cikakken bayanin garanti, da fatan za a koma zuwa littafin jagorar mai amfani.
• Abubuwan da ke cikin jagorar shigarwa ana iya canzawa ba tare da sanarwa don haɓaka aikin samfur ba.

TUNTUBE

• Abubuwan da aka bayar na LS ELECTRIC Co., Ltd. www.ls-electric.com 10310000309 V4.5 (2024.6)
• Imel: automation@ls-electric.com
• Hedikwata/Ofishin Seoul Tel: 82-2-2034-4033,4888,4703
• Ofishin LS ELECTRIC Shanghai (China) Tel: 86-21-5237-9977
• LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Tel: 86-510-6851-6666
• LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Tel: 84-93-631-4099
• LS ELECTRIC Gabas ta Tsakiya FZE (Dubai, UAE) Tel: 971-4-886-5360
• LS ELECTRIC Turai BV (Hoofddorf, Netherlands) Tel: 31-20-654-1424
• LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Tel: 81-3-6268-8241
• LS ELECTRIC America Inc. (Chicago, Amurka) Tel: 1-800-891-2941
• Ma'aikata: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea

Takardu / Albarkatu

LS GDL-D22C Mai Kula da Hankali Mai Shirye [pdf] Jagoran Shigarwa D24C, DT4C-C1, GDL-TR2C-C1, TR4C-C1, RY2C, GDL-D22C Mai Sarrafa dabaru, GDL-D22C, Mai sarrafa dabaru na shirye-shirye, Mai sarrafa dabaru, Mai sarrafawa

Magana

• Manual mai amfani