LS XBL-EMTA Mai Kula da Hankali Mai Shirye-shirye
Ƙayyadaddun bayanai
- C/Nku: 10310000852
- Samfura: Mai sarrafa dabaru na shirye-shirye - XGB FEnet XBL-EMTA
- Girmatsawo: 100 mm
Wannan jagorar shigarwa yana ba da bayanin aiki mai sauƙi ko sarrafa PLC. Da fatan za a karanta a hankali wannan takaddar bayanan da littafin jagora kafin amfani da samfuran. Musamman karanta taka tsantsan sannan sarrafa samfuran yadda yakamata.
Kariyar Tsaro
- Ma'anar lakabin gargaɗi da taka tsantsan
GARGADI
yana nuna haɗarin haɗari wanda, idan ba a guji shi ba, na iya haifar da mutuwa ko rauni mai tsanani
HANKALI
yana nuna yanayi mai haɗari wanda, idan ba a kauce masa ba, zai iya haifar da ƙananan rauni ko matsakaici. Hakanan ana iya amfani dashi don faɗakar da ayyuka marasa aminci
GARGADI
- Kada a tuntuɓi tashar yayin amfani da wutar.
- Tabbatar cewa babu wasu abubuwan ƙarfe na waje.
- Kar a sarrafa baturin (caji, tarwatsa, bugawa, gajere, siyarwa).
HANKALI
- Tabbatar duba ƙimar ƙimatage da tsarin tasha kafin wayoyi
- Lokacin yin wayoyi, ƙara ƙara dunƙule toshewar tasha tare da ƙayyadadden kewayon juzu'i
- Kada a shigar da abubuwa masu ƙonewa akan kewaye.
- Kar a yi amfani da PLC a cikin yanayin girgiza kai tsaye
- Sai dai ma'aikatan sabis na ƙwararru, kar a tarwatsa ko gyara ko gyara samfurin
- Yi amfani da PLC a cikin mahallin da ya dace da ƙayyadaddun bayanai da ke ƙunshe a cikin wannan takardar bayanan.
- Tabbatar cewa nauyin na waje bai wuce ƙimar samfurin fitarwa ba.
- Lokacin zubar da PLC da baturi, ɗauki shi azaman sharar masana'antu.
- Za a yi wa siginar I/O ko layin sadarwa aƙalla 100mm nesa da babban ƙarfin wutatage na USB ko layin wuta.
Yanayin Aiki
- Don shigarwa, kiyaye sharuɗɗan da ke ƙasa.
| A'a | Abu | Ƙayyadaddun bayanai | Daidaitawa | |||
| 1 | Nau'in yanayi | 0 ~ 55 ℃ | – | |||
| 2 | Yanayin ajiya. | -25 ~ 70 ℃ | – | |||
| 3 | Yanayin yanayi | 5 ~ 95% RH, mara sanyaya | – | |||
| 4 | Yanayin ajiya | 5 ~ 95% RH, mara sanyaya | – | |||
|
5 |
Resistance Vibration |
Jijjiga lokaci-lokaci | – | – | ||
| Yawanci | Hanzarta | Amplitude | Lamba |
Saukewa: IEC61131-2 |
||
| 5≤f<8.4㎐ | – | 3.5mm ku | Sau 10 a kowace hanya
domin X da Z |
|||
| 8.4≤f≤150㎐ | 9.8 (1 g) | – | ||||
| Ci gaba da girgiza | ||||||
| Yawanci | Hanzarta | Amplitude | ||||
| 5≤f<8.4㎐ | – | 1.75mm ku | ||||
| 8.4≤f≤150㎐ | 4.9 (0.5 g) | – | ||||
Software na Tallafi Mai Aiwatarwa
Don tsarin tsarin, sigar mai zuwa ya zama dole.
- XBC Series: SU (V1.5 ko sama), H (V2.4 ko sama), U (V1.1 ko sama)
- XEC Series: SU (V1.4 ko sama), H (V1.8 ko sama), U (V1.1 ko sama)
- XBM Series: S (V3.5 ko sama), H (V1.0 ko sama)
- XG5000 Software: V4.00 ko sama
Na'urorin haɗi da Ƙayyadaddun Kebul
Ana ba da shawarar kebul don CAT5E akan kebul na S-FTP. Nau'in kebul sun bambanta dangane da tsarin tsarin ku da yanayin ku. Da fatan za a tuntuɓi ƙwararrun mai siyarwa kafin shigarwa.
- Halayyar Lantarki
| Abu | Naúrar | Daraja | Sharadi |
| Juriya mai gudanarwa | Ω/km | 93.5 Ko ƙasa da haka | 25 ℃ |
| Voltage jimiri (DC) | V/1 min | 500V | A cikin iska |
| Juriya na Insulation (min) | MΩ-km | 2,500 | 25 ℃ |
| Halayen impedance | Ω | 100± 15 | 10MHz |
| Attenuation | Db/100m Ko kasa da haka | 6.5 | 10MHz |
| 8.2 | 16MHz | ||
| 9.3 | 20MHz | ||
| Ƙarshen magana ta kusa | Db/100m Ko kasa da haka | 47 | 10MHz |
| 44 | 16MHz | ||
| 42 | 20MHz |
Sunan sassan da Girma
Wannan ɓangaren gaba ne na samfurin. Koma zuwa kowane suna lokacin aiki da tsarin. Don ƙarin bayani, koma zuwa littafin jagorar mai amfani.
LED bayani
| Siliki | Halin LED | ||
| On | Kifta ido | Kashe | |
| GUDU | Na al'ada | – | ON lokacin da kuskuren mutuwa ya auku |
| I/F | – | Na al'ada | Tsaida I/F |
| ERR | H/W kuskure | S/W kuskure | – |
| TX | – | Lokacin aikawa | ON lokacin da kuskuren mutuwa ya auku |
| RX | – | Lokacin karba | ON lokacin da kuskuren mutuwa ya auku |
| Haɗin LED | – | Karbar
fakiti |
Babu karɓar fakitin |
| Gudun LED | 100Mbps | – | 10Mbps |
Shigarwa / Cire Modules
Anan shine hanyar da za a haɗa kowane module zuwa tushe ko cire shi.
- Tsarin shigarwa
- Cire murfin Tsawaita a samfurin.
- Tura samfurin kuma haɗa shi cikin yarjejeniya tare da ƙugiya Don Gyaran gefuna huɗu da ƙugiya Don Haɗin.
- Bayan haɗi, tura ƙasa da ƙugiya don Gyarawa kuma gyara shi gaba ɗaya.
- Cire module
- Tura sama ƙugiya Don Cire haɗin, sannan kuma cire samfurin da hannaye biyu. (Kada a cire samfurin da karfi)
- Tura sama ƙugiya Don Cire haɗin, sannan kuma cire samfurin da hannaye biyu. (Kada a cire samfurin da karfi)
Waya
Waya don Sadarwa
- 10/100BASE-TX's max.tsawon tsayi tsakanin nodes shine 100m.
- Wannan juzu'in juzu'i yana ba da aikin Giciye ta atomatik don mai amfani zai iya amfani da kebul na giciye da kai tsaye.
| Fil A'a | Alama | Wutar lantarki |  |
|
| Kebul madaidaiciya | Kebul na kebul | |||
| 1 | TD+ | 1-- 1 | 1-- 3 | |
| 2 | TD- | 2-- 2 | 2-- 6 | |
| 3 | RD+ | 3-- 3 | 3-- 1 | |
| 6 | RD- | 6-- 6 | 6-- 2 | |
| 4,5,7,8 | Ba a yi amfani da shi ba | – | – | |
Garanti
- Lokacin garanti shine watanni 36 daga ranar da aka yi.
- Ya kamata mai amfani ya gudanar da binciken farko na kurakurai. Koyaya, akan buƙata, LS ELECTRIC ko wakilanta zasu iya ɗaukar wannan aikin akan kuɗi. Idan aka gano dalilin laifin alhakin LS ELECTRIC ne, wannan sabis ɗin zai zama kyauta.
- Keɓancewa daga garanti
- Sauya sassa masu amfani da rayuwa (misali relays, fuses, capacitors, batura, LCDs, da sauransu)
- Rashin gazawa ko lalacewa ta hanyar rashin dacewa ko mu'amala a wajen waɗanda aka kayyade a cikin littafin mai amfani
- Rashin gazawar abubuwan waje marasa alaƙa da samfurin
- Rashin gazawar da aka samu ta hanyar gyare-gyare ba tare da izinin LS ELECTRIC ba
- Amfani da samfurin ta hanyoyin da ba a yi niyya ba
- Kasawar da ba za a iya annabta/warware su ta hanyar fasahar kimiyya na yanzu a lokacin kera ba
- Rashin gazawa saboda abubuwan waje kamar wuta, mahaukaci voltage, ko bala'o'i
- Wasu lokuta waɗanda LS ELECTRIC ba ta da alhakin su
- Don cikakken bayanin garanti, da fatan za a koma zuwa littafin jagorar mai amfani.
- Abubuwan da ke cikin jagorar shigarwa ana iya canzawa ba tare da sanarwa don haɓaka aikin samfur ba.
Abubuwan da aka bayar na LS ELECTRIC Co., Ltd
- www.ls-electric.com
- Imel: automation@ls-electric.com
- Hedikwata/Ofishin Seoul Tel: 82-2-2034-4033,4888,4703
- Ofishin LS ELECTRIC Shanghai (China) Tel: 86-21-5237-9977
- LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Tel: 86-510-6851-6666
- LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Tel: 84-93-631-4099
- LS ELECTRIC Gabas ta Tsakiya FZE (Dubai, UAE) Tel: 971-4-886-5360
- LS ELECTRIC Turai BV (Hoofddorf, Netherlands) Tel: 31-20-654-1424
- LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Tel: 81-3-6268-8241
- LS ELECTRIC America Inc. (Chicago, Amurka) Tel: 1-800-891-2941
- Ma'aikata: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea
FAQs
Tambaya: Menene kewayon zafin aiki na PLC?
A: Yanayin zafin aiki shine -25 ° C zuwa 70 ° C.
Tambaya: Zan iya faɗaɗa iyawar I/O na wannan PLC?
A: Ee, zaku iya faɗaɗa iyawar I/O ta amfani da na'urorin haɓaka masu jituwa.
Takardu / Albarkatu
 |
LS XBL-EMTA Mai Kula da Hankali Mai Shirye-shirye [pdf] Jagoran Shigarwa XBL-EMTA, XBL-EMTA Mai Kula da Ma'ana Mai Shirye-shiryen, Mai Gudanar da Dabarun Shirye-shiryen, Mai sarrafa dabaru, Mai sarrafawa |