AMAZON CON4 Sauna Stove Controller Instruction Manual

1. Gabatarwa

This manual provides detailed instructions for the installation, operation, and maintenance of the AMAZON CON4 Sauna Stove Controller. Please read this manual thoroughly before installation and use to ensure safe and efficient operation of your sauna heater.

2. Bayanin Tsaro

WARNING: Electrical installation should only be performed by a qualified electrician in accordance with all local and national electrical codes.

• Always disconnect power to the sauna heater before performing any installation, maintenance, or troubleshooting.
• Do not operate the controller with wet hands or in wet conditions.
• Tabbatar cewa duk hanyoyin haɗin suna amintacce kuma an killace su yadda ya kamata.
• Keep the control panel and control box away from water and high humidity.
• This device is intended for controlling sauna stoves. Do not use it for other purposes.

3. Abubuwan Kunshin

Tabbatar cewa duk abubuwa suna nan a cikin kunshin:

• AMAZON CON4 Control Panel
• Control Box (Power Unit)
• Temperature Probe Cable

4. Ƙayyadaddun bayanai

5. Shigarwa da Saita

Proper installation is crucial for the safe and effective operation of the sauna stove controller. It is highly recommended that installation be performed by a certified electrician.

5.1 Gane Abun Ƙirar

Ka saba da manyan abubuwan da aka haɗa:

• Kwamitin Gudanarwa: The user interface for setting time and temperature.
• Akwatin Sarrafa: The main power unit that connects to the sauna heater and power supply.
• Binciken Zazzabi: Measures the room temperature in the sauna.

5.2 Haɗin Waya

The control box handles the main electrical connections to the sauna heater and the power supply. The control panel connects to the control box, and the temperature probe connects to the control panel.

1. hawa: Securely mount the control box and control panel in appropriate locations. The control panel should be easily accessible to the user, while the control box can be mounted in a less visible, but well-ventilated area.
2. Tushen wutan lantarki: Connect the main power supply to the control box. Ensure the voltage and current ratings match your sauna heater and local electrical standards.
3. Sauna Heater Connection: Connect the sauna heater's power cables to the designated terminals within the control box.
4. Haɗin Panel Control: Connect the control panel to the control box using the provided cable.
5. Temperature Probe Installation: Install the temperature probe inside the sauna room, typically on a wall at a recommended height (refer to your sauna heater's manual for specific placement). Connect the temperature probe cable to the designated port on the control panel.

CAUTION: Incorrect wiring can lead to electric shock, fire, or damage to the equipment. Always consult a professional for electrical installation.

6. Umarnin Aiki

The CON4 control panel features an intuitive interface for managing your sauna experience.

6.1 Sarrafa panelview

Ƙungiyar sarrafawa ta ƙunshi:

• Digital Displays: Two displays show "Time Remaining" and "Room Temperature".
• Maɓalli:
  • Saita Lokaci: Adjusts the sauna operating time.
  • Saita Zazzabi: Adjusts the desired sauna room temperature.
  • Mode A/B: Selects between different operating modes (details may vary, refer to specific sauna heater manual).
  • Kunnawa/Kashe: Controls the sauna room lighting.
  • Kunna/Kashe: Powers the sauna heater on or off.
  • Kibiyoyin Sama/Ƙasa: Used to increase or decrease time and temperature settings.

6.2 Basic Aiki

1. Kunnawa/Kashewa: Danna maɓallin Kunna/Kashe button to turn the sauna heater system on or off.
2. Lokacin Saita:
   1. Danna maɓallin Saita Lokaci maballin.
   2. Yi amfani da Kibiyoyin Sama/Ƙasa to adjust the desired operating time.
   3. The display will show the remaining time during operation.
3. Saita Zazzabi:
   1. Danna maɓallin Saita Zazzabi maballin.
   2. Yi amfani da Kibiyoyin Sama/Ƙasa to adjust the desired room temperature.
   3. Nunin zai nuna zafin dakin na yanzu.
4. Controlling Light: Danna maɓallin Kunna/Kashe Haske button to toggle the sauna room light.
5. Zaɓin Yanayin: If your sauna heater supports multiple modes, press the Mode A/B maɓallin don canzawa tsakanin su.

7. Kulawa

Regular maintenance ensures the longevity and proper functioning of your sauna stove controller.

• Tsaftacewa: Wipe the control panel with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Dubawa: A riƙa duba duk hanyoyin haɗin waya lokaci-lokaci don ganin ko suna da ƙarfi da kuma alamun lalacewa ko lalacewa.
• Muhalli: Ensure the control panel and control box are kept in a dry environment, free from excessive dust or moisture.

WARNING: Always disconnect power before cleaning or inspecting the control box or any electrical components.

8. Shirya matsala

If you encounter issues with your sauna stove controller, try the following basic troubleshooting steps:

• Babu Ƙarfi:
  • Check the main power supply to the control box.
  • Tabbatar cewa duk hanyoyin haɗin lantarki suna da aminci.
  • Tabbatar cewa Kunna/Kashe an danna maballin.
• Karatun Zazzabi mara daidai:
  • Ensure the temperature probe is correctly installed and connected to the control panel.
  • Check for any obstructions around the temperature probe that might affect its reading.
• Sauna Heater Not Heating:
  • Verify that the desired temperature is set higher than the current room temperature.
  • Check the operating time setting; ensure sufficient time is allocated.
  • Confirm that the sauna heater itself is functioning correctly (refer to the sauna heater's manual).

Don batutuwa masu dorewa, da fatan za a tuntuɓi tallafin abokin ciniki.

9. Tukwici masu amfani

To enhance your sauna experience and ensure the longevity of your equipment:

• For optimal sauna experience, allow the sauna heater to preheat for at least 30-60 minutes before use.
• Always ensure proper ventilation in the sauna room.
• Regularly check the sauna stones and replace them if they are cracked or crumbling.

10. Garanti da Tallafawa

10.1 Bayanin Garanti

The AMAZON CON4 Sauna Stove Controller comes with the following warranty:

• Main Electrical Components: One (1) year free warranty from the date of purchase for material and quality issues. This warranty does not cover accessories or other non-electrical parts.
• Bututun dumama: Three (3) months or ninety (90) days warranty.

The company reserves the right to choose between repair or replacement. Any returns for repair must be pre-approved by the company. Return shipping costs are the responsibility of the customer.

Garanti baya rufe lalacewar sakamakon:

• Incorrect use or operation.
• Negligence or accidental breakage.
• Improper power connection.
• Modification or repair by unauthorized personnel.

After the warranty period, paid repair services are available, covering material costs for parts and travel expenses.

10.2 Tallafin Abokin Ciniki

For any questions, technical assistance, or warranty claims, please contact us:

• WhatsApp: +86 155766507
• Imel: 1434250503@qq.com
• WeChat: 15576650740