Altronix ACMCB220 Masu Gudanar da Wuta tare da Jagoran Shigar Kayan Wuta

Altronix ACMCB220 Series raka'a suna rarrabawa da canza iko don samun damar tsarin sarrafawa da na'urorin haɗi. Suna canza 220VAC (kewayon aiki 198VAC - 256VAC), shigarwar 50/60Hz zuwa takwas (8) mai sarrafa kansa na 12VDC ko 24VDC PTC da aka kayyade. Ana kunna fitarwa ta hanyar buɗaɗɗen mai tattarawa ko kuma buɗe (NO) busasshen shigar da shigar da busassun bayanai daga Tsarin Gudanarwa, Mai karanta Kati, faifan maɓalli, Maɓallin turawa, PIR, da sauransu. Raka'a za su tura wutar lantarki zuwa na'urorin sarrafa dama iri-iri ciki har da: Mag Makullai, Yajin Wutar Lantarki, Masu riƙe da Ƙofa na Magnetic, da sauransu. Fitarwa za su yi aiki a cikin yanayin rashin aminci da/ko gaza-aminci. Fuskar FACP tana ba da damar Ƙaddamar Gaggawa, Kula da Ƙararrawa, ko ƙila a yi amfani da su don haifar da wasu na'urori masu taimako. Siffar cire haɗin ƙararrawar wuta ana iya zaɓa ɗaya ɗaya don kowane ko duka na takwas (8).

ACMCB220 Jadawalin Bayanin Kanfigareshan Fim

Altronix Lambar Samfura	Saukewa: 12VDC Jimlar Fitar Yanzu	Saukewa: 24VDC Jimlar Fitar Yanzu	PTC Abubuwan fitarwa (aikin sake saitawa ta atomatik)	Matsayin Fitowar Mutum ɗaya	220VAC 50/60Hz Shigar da Zane na Yanzu	Ƙididdiga Fuse na Hukumar Samar da Wuta	Ƙimar Ƙarƙashin Ƙarƙashin Ƙarƙashin Batir
Saukewa: AL400ACMCB220	4A	3A	8	2.5 A	1.2 A	5A/250V	15A/32V
Saukewa: AL600ACMCB220	6A	6A			1.5 A		-
Saukewa: AL1012ACMCB220	10 A	-			2.2 A		15A/32V
Saukewa: AL1024ACMCB220	-	10 A			3A		15A/32V

Ƙayyadaddun bayanai

Shigarwa:

Zaɓuɓɓukan shigar da wutar lantarki:
- Ɗaya (1) shigarwar wutar lantarki gama gari don ACM8CB da ikon kulle (an saka masana'anta).
- Biyu (2) keɓaɓɓen abubuwan shigar da wutar lantarki - Ɗaya (1) don kunna ACM8CB da ɗaya (1) don ikon na'ura na kulle (ana buƙatar samar da wutar lantarki na waje).
  Ana ƙayyade halin yanzu ta hanyar samar da wutar lantarki da aka haɗa, kada ya wuce iyakar 10A duka.
Takwas (8) Tsarin Gudanar da Samun damar shigar da abubuwan shiga.
Zaɓuɓɓukan shigarwa:
- Takwas (8) yawanci buɗewa (NO).
- Takwas (8) buɗaɗɗen abubuwan shigar masu tarawa.
- Duk wani hade na sama.

Fitowa:

12VDC ko 24VDC fitarwa.
Abubuwan da ke da iyakacin ƙarfi.
Takwas (8) mai zaman kansa yana sarrafa gazawar-Safe da/ko Rashin-Tsaron fitilun wutar lantarki.
Takwas (8) na'urorin wutar lantarki (ba a kunna ba)
Ana ƙididdige fitar da PTCs @ 2.5A.
Abubuwan da aka tace da kuma na'urar lantarki (ginayen wutar lantarki).

Alamun gani:

Jajayen LED suna nuna abubuwan da aka kunna (masu kuzarin relays).
Green LED yana nuna cire haɗin FACP yana jawo.
Shigar da AC da alamun fitarwa na LED.

Ajiyayyen Baturi:

Caja da aka gina a ciki don rufaffiyar gubar acid ko nau'in batura na gel.
AL400XB2V, AL600XB220, da AL1012XB220 (Power Supply Board) matsakaicin cajin 0.7A. AL1024XB2V (Power Supply Board) matsakaicin cajin na yanzu 3.6A.

Canja atomatik zuwa baturin jiran aiki lokacin da AC ta gaza.
Shigar da AC da alamun fitarwa na LED.
Zero voltage sauke lokacin da naúrar ta canza zuwa madadin baturi (yanayin gazawar AC).
Rashin baturi da kula da kasancewar baturi (form "C" lamba).

Siffofin:

Cire haɗin ƙararrawa na Wuta (latching ko rashin latching) ana iya zaɓin ɗaiɗaiku don kowane ko duka na takwas (8).

Zaɓuɓɓukan shigar da ƙararrawar wuta:
- Buɗewa ta al'ada (NO) ko kuma rufe (NC) busasshen shigar da lamba.
- Shigar da juyar da polarity daga da'irar siginar FACP.

Ƙararrawa fitarwa yana nuna cewa an kunna shigar da FACP (nau'i na "C" lamba @ 1A 28VDC).
Gajeren kewayawa da kariyar wuce gona da iri.

Girman Rukunin (H x W x D kimanin):

15.5" x 12" x 4.5"
(393.7mm x 304.8mm x 114.3mm).

Yakin yana ɗaukar batura har zuwa biyu (2) 12AH.

Umarnin Shigarwa

Hanyoyin wayoyi za su kasance daidai da National Electrical Code/NFPA 70/NFPA 72/ANSI, kuma tare da duk lambobin gida da hukumomi masu iko. An yi nufin samfurin don amfanin cikin gida kawai.

Dutsen naúrar a wurin da ake so. Yi alama da ramuka a bango don yin layi tare da manyan ramukan maɓalli biyu a cikin shingen. Shigar da manyan haɗe-haɗe biyu da sukurori a bango tare da ɗumbin kawunan suna fitowa. Sanya ramukan maɓalli na sama na katangar sama da sukurori biyu na sama, matakin kuma amintattu. Alama matsayi na ƙananan ramuka biyu. Cire shingen. Hana ƙananan ramuka kuma shigar da masu ɗaure uku. Sanya ramukan maɓalli na sama sama da sukurori biyu na sama. Shigar da ƙananan sukurori biyu kuma tabbatar da ƙarfafa duk screws (Ƙaƙƙarfan Ƙirar, shafi 12). Amintaccen shinge ga ƙasan ƙasa.
Ana ba da shawarar farko don sake sakewaview Tables masu zuwa don sauƙaƙe shigarwa:
Fitarwa Voltage da Taswirar Takaddun Takaddun Tsaya (shafi na 3)
Shafi na 6 na aikace-aikace na yau da kullun
Ƙididdigar LED (shafi na 6)
Teburan Gano Tasha (shafi na 5)
Zane-zanen Ƙogi (shafi na 8-9)

Saita fitarwa voltage:
AL400ACMCB220 da AL600ACMCB220: saita fitarwa DC da ake so voltage ta saita canza SW1 zuwa matsayi mai dacewa akan allon samar da wutar lantarki. AL1012ACMCB220 aka kafa masana'anta a 12VDC da AL1024ACMCB220 an saita masana'anta a 24VDC (Output Vol.tage da Tsayuwar Ƙayyadaddun Shafukan da ke ƙasa)
Fitarwa Voltage da Tsayuwar Taswirar Takaddamawa:
Saukewa: AL400ACMCB220

Voltage	Canja Matsayi	Batir na tsaye	4h ku. Tsaya / 5 min. Ƙararrawa	24h ku. Tsaya / 5 min. Ƙararrawa
Saukewa: 12VDC	SW1 - ON	40AH	3.5A / 3.5A	1A / 3.5A
Saukewa: 24VDC	SW1 - KASHE	40AH	2.75A / 2.75A	1A / 3A

Saukewa: AL600ACMCB220

Voltage	Canja Matsayi	Batir na tsaye	4h ku. Tsaya / 5 min. Ƙararrawa	24h ku. Tsaya / 5 min. Ƙararrawa
Saukewa: 12VDC	SW1 - ON	40AH	5.5A / 5.5A	0.5A / 5.5A
Saukewa: 24VDC	SW1 - KASHE	40AH	5.75A / 5.75A	0.75A / 5.75A

Saukewa: AL1012ACMCB220

Voltage	Canja Matsayi	Batir na tsaye	4h ku. Tsaya / 5 min. Ƙararrawa	24h ku. Tsaya / 5 min. Ƙararrawa
Saukewa: 12VDC	N/A	40AH	9.5A / 9.5A	0.5A / 9.5A

Saukewa: AL1024ACMCB220 (koma zuwa AL1024ACMCB220 Takardun Lissafin Girman Batir, shafi 10).

Voltage	Batir na tsaye	15 min. Tsaya / 5 min. Ƙararrawa	4h ku. Tsaya / 5 min. Ƙararrawa	24h ku. Tsaya / 5 min. Ƙararrawa	60h ku. Tsaya / 5 min. Ƙararrawa
Saukewa: 24VDC	12AH	7.7A / 9.7A	1.2A / 9.7A	-	-
Saukewa: 24VDC	65AH	-	7.7A / 9.7A	1.2A / 9.7A	200mA / 9.7A

Haɗa AC (Hoto 2, shafi 7):
Haɗa ƙarfin AC mara kunnawa (220VAC, 50/60Hz) zuwa tashoshi masu alama [L, N].
Yi amfani da 14 AWG ko mafi girma don duk haɗin wutar lantarki. Amintaccen koren waya yana kaiwa ga lugga ƙasa.
Ajiye wayoyi masu iyaka dabam dabam daga wayoyi marasa iyaka (220VAC, 50/60Hz Input, Wayoyin Baturi). Dole ne a samar da tazara mafi ƙarancin 0.25.
HANKALI: Kar a taɓa sassan ƙarfe da aka fallasa. Kashe wutar da'irar reshe kafin shigarwa ko kayan aiki. Babu sassa masu amfani a ciki.
Koma shigarwa da sabis zuwa ƙwararrun ma'aikatan sabis.
Auna voltage kafin haɗa na'urori. Wannan yana taimakawa guje wa lalacewa mai yuwuwa.

Zaɓuɓɓukan fitarwa (Hoto 1, shafi 6):
Naúrar za ta samar da ko dai guda takwas (8) da aka canza wutar lantarki, takwas (8) busasshen nau'in fitowar "C", ko duk wani haɗin haɗin wutar lantarki da nau'i na "C", da takwas (8) da ba a kunna wutar lantarki ba.
1. Abubuwan da aka Canja Wuta:
  Haɗa madaidaicin shigarwar (-) na na'urar da ake kunna wuta zuwa tasha mai alama [COM].
  Don Rashin-Safe aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [NC].
  Don Ƙarfafa Amintaccen aiki haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wutar lantarki zuwa tasha mai alama [NO].
2. Fitowar wutar lantarki (ba a kunna):
  Haɗa ingantaccen shigarwar (+) na na'urar da ake kunna wuta zuwa tashar da aka yiwa alama [C] da kuma mummunan (-) na na'urar da ake kunna wutar zuwa tasha mai alama [COM]. Ana iya amfani da fitarwa don samar da wuta ga masu karanta katin, maɓalli, da sauransu.
Zaɓuɓɓukan shigar da ƙara (Hoto 1, shafi 6):
1. Kullum Buɗe [NO] shigar da fararwa:
  Ana kunna abubuwan shigarwa 1-8 ta hanyar buɗewa ko buɗe abubuwan shigar da ruwa mai tarawa.
  Haɗa na'urori (masu karanta katin, faifan maɓalli, buƙatun fita maɓallan da sauransu) zuwa tashoshi masu alama [IN] da [GND].
2. Buɗe abubuwan shigar da Mai Tari:
  Haɗa kwamitin kula da hanyar shiga buɗaɗɗen nutse mai tarawa tabbatacce (+) zuwa tashar da aka yiwa alama [IN] da korau (-) zuwa tasha mai alama [GND].

Zaɓuɓɓukan Interface Ƙararrawar Wuta (Figs. 4 zuwa 8, shafi 8):
Rufe [NC], yawanci buɗe [NO] shigarwar ko shigar da juzu'i na polarity daga da'irar siginar FACP zai haifar da zaɓin abubuwan da aka zaɓa. Don kunna cire haɗin FACP don fitarwa kunna madaidaicin sauyawa [SW1-SW8] KASHE. Don kashe cire haɗin FACP don fitarwa kunna madaidaicin sauyawa [SW1-SW8] ON.
1. Kullum Buɗe shigarwar [NO]:
  Don ƙugiya mara nauyi (Fig. 5, shafi na 8). Don manne ƙugiya duba hoto 6, shafi. 9.
2. Shigar da aka saba rufe [NC]:
  Don ƙugiya mara nauyi (Fig. 7, shafi na 9). Don manne ƙugiya duba hoto 8, shafi. 9.
3. Shigar da siginar siginar FACP:
  Haɗa tabbataccen (+) da korau (-) daga fitowar sigina na FACP zuwa tashoshi masu alama [+ INP -]. Haɗa FACP EOL zuwa tashoshi masu alama [+ RET -] (an yi la'akari da polarity a cikin yanayin ƙararrawa). Jumper dake kusa da TRG LED dole ne a yanke (Fig. 1a, shafi 6).

FACP Dry form “C” fitarwa (Hoto 1a, shafi 6):
Haɗa na'urar da ake so don haifar da busasshiyar fitowar lamba ta naúrar zuwa tashoshi masu alamar [NO] da [C] FACP don buɗe fitarwa ta al'ada ko tashoshi masu alamar [NC] da [C] FACP don fitowar da aka rufe.
Haɗin baturi (Hoto 2, shafi 7):
Don aikace-aikacen Ikon Samun batir batir na zaɓi ne. Idan ba a yi amfani da batura ba, asarar AC zai haifar da asarar juzu'in fitarwatage. Dole ne batirin ya zama nau'in gubar acid ko gel.
Haɗa baturi ɗaya (1) 12VDC zuwa tashoshi masu alamar [+ BAT -] don aikin 12VDC.
Yi amfani da batura guda biyu (2) 12VDC masu wayoyi a jere don aikin 24VDC.
Fitowar Baturi da AC (Hoto 2, shafi 7):
Ana buƙatar haɗa na'urori masu ba da rahoton matsala na kulawa zuwa abubuwan da aka yiwa alama [AC Fail, BAT FAIL] abubuwan sarrafawa masu alama [NC, C, NO] zuwa na'urorin sanarwar da suka dace. Yi amfani da 22 AWG zuwa 18 AWG don gazawar AC & Ƙananan / Babu rahoton baturi. Yanke "jinkirin AC" don jinkirta rahoton na awanni 6.
Lura: A tampDole ne a shigar da maɓalli kuma a haɗa zuwa na'urar sanarwa da ta dace don ba da rahoton yanayin matsala lokacin da ƙofar kewaye ke buɗe.
Abubuwan shigar da wutar lantarki da yawa (Hoto 1, shafi 6):
Lokacin amfani da kayan wuta guda biyu (2) masu tsalle J1 da J2 (wanda ke gefen hagu na tashar wutar lantarki) dole ne a yanke (Fig. 1c, shafi 6 & Fig. 3 shafi 8). Haɗa wuta don ACM8CB zuwa tashoshi masu alama [- Control +] kuma haɗa wuta don na'urorin kulle zuwa tashoshi masu alama [- Power +].
Lokacin amfani da wutar lantarki DC dole ne a kiyaye polarity.
Lokacin amfani da wutar lantarki AC ba buƙatar kiyaye polarity ba (Fig. 1d, shafi 6)

Kulawa

Ya kamata a gwada naúrar aƙalla sau ɗaya a shekara don aikin da ya dace kamar haka:

Fitarwa Voltage Gwaji: A ƙarƙashin yanayin kaya na yau da kullun, fitarwar DC voltage ya kamata a duba don daidai voltage matakin (Output Voltage da Taswirar Ƙayyadaddun Tsaya, shafi. 3).

Gwajin Baturi: A ƙarƙashin yanayin kaya na al'ada duba cewa an cika cajin baturin, duba ƙayyadaddun voltage a tashoshin baturi da kuma tashoshin allon allo masu alamar [+ BAT -] don tabbatar da cewa babu karya a cikin wayoyi masu haɗin baturi.

Lura: AL400XB2V, AL600XB220, AL1012XB220 (Power Supply Board) matsakaicin cajin halin yanzu shine 0.7A.
AL1024XB2V (Power Supply Board) matsakaicin cajin na yanzu shine 3.6A.
Rayuwar baturi da ake tsammani shine shekaru 5, duk da haka ana bada shawarar canza batir a cikin shekaru 4 ko ƙasa da haka idan ya cancanta.

Teburin Gano Tasha:

Hukumar Samar da Wutar Lantarki

Labarin Ƙarshe	Aiki/Bayyana
L, N	Haɗa 220VAC, 50/60Hz zuwa waɗannan tashoshi: L zuwa zafi, N zuwa tsaka tsaki.
+ DC -	AL400ACMCB220 - 12VDC @ 4A ko 24VDC @ 3A zuwa allon ACM8CB. AL600ACMCB220 - 12VDC/24VDC @ 6A zuwa allon ACM8CB. AL1012ACMCB220 - 12VDC @ 10A zuwa allon ACM8CB. AL1024ACMCB220-24VDC @ 10A zuwa allon ACM8CB.
AC FAIL NC, C, NO	Ana amfani da shi don sanar da asarar wutar AC, misali haɗi zuwa na'ura mai ji ko ƙararrawa. Relay yawanci ana samun kuzari lokacin da wutar AC ta kasance. Ƙimar lamba 1A @ 28VDC. Ana ba da rahoton gazawar AC ko launin ruwan kasa a cikin minti 1 na aukuwa. Don jinkirta bayar da rahoto har zuwa sa'o'i 6. yanke “jinkirin AC” jumper kuma sake saita wuta zuwa naúrar.
BAT FAIL NC, C, NO	Ana amfani da shi don nuna ƙarancin yanayin baturi, misali haɗi zuwa sashin ƙararrawa. Relay yawanci yana samun kuzari lokacin da ƙarfin DC ya kasance. Ƙimar lamba 1A @ 28VDC. Ana ba da rahoton cire baturi a cikin mintuna 5. An bayar da rahoton sake haɗa baturi a cikin minti 1. Ƙananan iyakar baturi: 12VDC fitarwa kofa saita @ kusan 10.5VDC (N/A don AL1024ACMCB220), 24VDC fitarwa kofa @ kusan 21VDC (N/A na AL1012ACMCB220).
+ BAT -	Haɗin baturi na tsaye. AL400XB2V, AL600XB220 da AL1012XB220 (Power Supply Board) matsakaicin cajin halin yanzu shine 0.7A. AL1024XB2V (Power Supply Board) matsakaicin cajin na yanzu shine 3.6A.

ACM8CB Mai Kula da Wutar Lantarki

Labarin Ƙarshe	Aiki/Bayyana
- Power +	12VDC ko 24VDC shigarwa daga hukumar samar da wutar lantarki.
– Sarrafa +	Ana iya haɗa waɗannan tashoshi zuwa keɓaɓɓen wutar lantarki don samar da keɓantaccen ikon aiki don ACM8CB (dole ne a cire masu tsalle J1 da J2).
TARBIYYA 1 - INPUT 8 IN, GND	Daga budewa da/ko buɗaɗɗen abubuwan shigar da mai tarawa (buƙatun fita maɓallan, fita pir's, da sauransu).
FITOWA TA 1 - Fitarwa 8 NC, C, NO, COM	12 zuwa 24 volts AC / DC yana haifar da abubuwan sarrafawa masu sarrafawa: Rashin-Safe [NC tabbatacce (+) & COM Negative (-)], Rashin Amintacce [NO tabbatacce (+) & COM Negative (-)], fitarwa na taimako [C tabbatacce (+) & COM Negative (v)] (Lokacin da ake amfani da wutar lantarki ta AC ba a buƙatar kiyaye polarity), Lambobin sadarwa da aka nuna a cikin yanayin da ba a kunna ba.
FACP INTERFACE T, + INPUT -	Wuta Ƙararrawa Interface yana jawo shigarwa daga FACP. Ana iya buɗe abubuwan shigar da ƙara a kullum, yawanci rufe daga da'irar fitarwa ta FACP (Hoto na 4 zuwa 8, shafi na 8-9).
FACP INTERFACE NC, C, NO	Form "C" tuntuɓi mai lamba @ 1A 28VDC don rahoton ƙararrawa.

Tsarin aikace-aikace na yau da kullun

LED Diagnostics

Hukumar Samar da Wutar Lantarki

LED		Matsayin Samar da Wuta
Ja (DC)	Green (AC)	Matsayin Samar da Wuta
ON	ON	Yanayin aiki na al'ada.
ON	KASHE	Asarar AC. Batir yana ba da ƙarfi ta tsaye.
KASHE	ON	Babu fitarwa na DC. Gajeren kewayawa ko yanayin hawan zafi.
KASHE	KASHE	Babu fitarwa na DC.

Ja (Jemage)	Matsayin baturi
ON	Yanayin aiki na al'ada.
KASHE	Baturi gazawa/ƙarancin baturi.

ACM8CB Mai Kula da Wutar Lantarki

LED	ON	KASHE
LED 1 - LED 8 (ja)	Relay(s) na fitar da kuzari.	Relay(s) na fitar da kuzari.
Trg (Green)	An kunna shigar da FACP (yanayin ƙararrawa).	FACP na al'ada (yanayin rashin ƙararrawa).

Hoto 2 - ACMCB220 Tsarin Kanfigareshan

HANKALI: Kashe naúrar kuzari kafin yin hidima.
Don ci gaba da kariya daga haɗarin wuta, maye gurbin fiusi da nau'in nau'in da ƙima iri ɗaya.

HANKALI: Batir masu caji na zaɓi dole ne su dace da fitarwar wutar lantarki voltage saitin.

Kiyaye iyakataccen wayoyi daban da mara iyaka. Yi amfani da tazara mafi ƙarancin 0.25 inci.

Hoto-Up

Hoto 3 Haɗawar zaɓi ta amfani da abubuwan shigar wutar lantarki guda biyu (2):

Hoto 4 shigarwar juyar da polarity daga fitarwa na sigina na FACP (an yi la'akari da polarity a yanayin ƙararrawa):

Hoto 5 Akan Buɗewa: Ba-Latching FACP shigar da ƙara:

Hoto 6 A kullum Buɗe shigar da shigar FACP Latching tare da sake saiti (UL ba ta kimanta wannan fitarwa ba):

Hoto 7 Akan Rufe: Ba-Latching FACP shigar da fararwa:

Hoto 8 Akan Rufe: Latching shigarwar FACP mai jawo tare da sake saiti (UL bai kimanta wannan fitarwa ba):

AL1024ACMCB220 Girman Batir Lissafin Aiki

AL1024ACMCB220 amfani na ciki na yanzu (tsayawa) __________ 0.35A
Load da amfani na yanzu (tsayawa) __________ A
Ana buƙatar lokacin jiran aiki (Hours) __________ H
Ana buƙatar ƙarfin baturi don jiran aiki (A+B)*C __________ AH
AL1024ACMCB220 yawan wutar lantarki na ciki (Ƙararrawa) __________ 0.35A
Load da amfani na yanzu (Ƙararrawa) __________ A
Tsawon ƙararrawa (Sa'o'i, misaliampku: 15 min. = 0.25 Hour) (Ƙararrawa) __________ H
Ana buƙatar ƙarfin baturi don Ƙararrawa (E+F)*G __________ AH
Jimlar ƙarfin baturi D+H __________ AH
Ana buƙatar ƙarfin baturi I*1.8 (ma'anar aminci) __________ AH

Lura: An tsara wutar lantarki ta AL1024ACMCB220 don yin aiki tare da batura har zuwa 65AH. Lura, layin [I] kada ya wuce 36AH. Dole ne ku rage ko dai jiran aiki na yanzu ko lokacin jiran aiki don biyan buƙatu.

Don tantance ainihin girman baturi don Allah a zagaye layi [J] zuwa mafi girman daidaitaccen girman baturi mafi kusa.

Girman Rukunin

Girman Rukunin (H x W x D kimanin):
15.5" x 12" x 4.5" (393.7mm x 304.8mm x 114.3mm)

Altronix baya da alhakin kowane kuskuren rubutu.
140 58th Street, Brooklyn, New York 11220 USA | waya: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com | e-mail: info@altronix.com | Garanti na rayuwa
Saukewa: IACMCB220F25U

Takardu / Albarkatu

Altronix ACMCB220 Masu Gudanar da Wutar Lantarki tare da Kayan Wuta [pdf] Jagoran Shigarwa
ACMCB220, AL1012ACMCB220, Masu Gudanar da Wutar Lantarki tare da Kayan Wuta, Masu Gudanar da Wutar Lantarki, Masu Sarrafa Wuta, ACMCB220, Masu Gudanarwa

Magana

Manual mai amfani

Misali Hada da

Ƙarsheview