Saukewa: ACMS12
Karamar Majalisa
Samun Masu Gudanar da Wuta
Jagoran Shigarwa
ACMS12 Series Karamin Majalisar Samun Masu Sarrafa Wuta
Model sun hada da:
Saukewa: ACMS12
– Goma sha biyu (12) Abubuwan Kariyar Fuse
Saukewa: ACMS12CB
– Goma sha biyu (12) Abubuwan Kariyar PTC
Ƙarsheview:
Altronix ACMS12/ACMS12CB ƙananan majalisu ne da aka tsara don amfani da su a cikin Altronix BC300, BC400, Trove1, Trove2 da Trove3 da madaidaitan raka'o'in wutar lantarki. Zane-zanen shigarwa biyu na Mai Kula da Wutar Lantarki yana ba da damar sarrafa wutar lantarki daga ƙananan volts guda biyu (2).tage 12 ko 24VDC Altronix samar da wutar lantarki zuwa goma sha biyu (12) fiusi mai sarrafa kansa (ACMS12) ko PTC (ACMS12CB) abubuwan da aka kare. Ana kunna fitarwa ta hanyar buɗaɗɗen mai tattarawa, yawanci buɗewa (NO), yawanci rufe (NC) shigar da busassun faɗakarwa, ko jika fitarwa daga Tsarin Kulawa, Mai karanta Kati, faifan maɓalli, Maɓallin Push, PIR, da sauransu ACMS12(CB) zai hanyar wutar lantarki zuwa nau'ikan na'urorin sarrafa kayan aiki iri-iri gami da Makullin Mag, Yajin Wutar Lantarki, Masu riƙe da Ƙofa na Magnetic, da sauransu. Abubuwan da za a yi za su yi aiki cikin yanayin rashin aminci ko rashin tsaro. Fuskar FACP tana ba da damar Ƙirar Gaggawa, Kula da Ƙararrawa, ko ƙila a yi amfani da ita don jawo wasu na'urori masu taimako. Za'a iya zaɓin fasalin cire haɗin ƙararrawar wuta ɗaya ɗaya ko ɗaya don kowane ko duka abubuwan guda goma sha biyu (12). Masu haɗin spade suna ba ku damar sarrafa sarkar daisy zuwa nau'ikan ACMS12(CB) da yawa. Wannan fasalin yana ba ku damar rarraba wutar lantarki akan ƙarin abubuwan fitarwa don manyan tsarin.
Ƙayyadaddun bayanai:
Shigar da Voltage:
- Shigar da 1: 12 ko 24VDC Altronix wutar lantarki.
- Shigar da 2: 12 ko 24VDC Altronix wutar lantarki ko ko dai 5 ko 12VDC daga VR6 Regulator.
- Shigowar Yanzu:
ACMS12: 20A duka
ACMS12CB: 16A duka. - Goma sha biyu (12) abubuwan shigar da zaɓaɓɓu masu iya zaɓaɓɓu:
a) Abubuwan da aka saba buɗewa (NO) (bushe lambobin sadarwa).
b) Abubuwan shigar da aka saba rufe (NC) (bushen lambobi).
c) Buɗe abubuwan shigar da mai tarawa.
d) Rigar Input (5VDC - 24VDC) tare da resistor 10K
e) Duk wani haɗuwa na sama.
Abubuwan da aka fitar:
- ACMS12: Fuse masu kariya da aka ƙididdige @ 2.5A akan kowane fitarwa, mara iyaka.
Jimlar fitarwa 20A max.
Duba Input/Fitarwa Voltage Ratings, pg. 7.
ACMS12CB: Abubuwan da aka kare na PTC wanda aka ƙididdige @ 2A akan kowane fitarwa, Class 2-iyakantaccen ƙarfi.
Jimlar fitarwa 16A max.
Kada ku wuce daidaitattun ƙimar samar da wutar lantarki.
Duba Input/Fitarwa Voltage Ratings, pg. 7.
Jimlar fitarwa na halin yanzu bai kamata ya wuce max. rating halin yanzu na samar da wutar lantarki aiki a kan kowane shigarwa.
Duba Matsakaicin Fitar da Kayan Wutar Altronix. - Goma sha biyu (12) zaɓaɓɓu masu ikon sarrafa gazawar Safe-Safe ko Ƙarfin-Tsarin fitin wutar lantarki.
- Za'a iya saita abubuwan da aka fitar guda ɗaya zuwa matsayin KASHE don yin hidima (saitin jumper zuwa matsayi na tsakiya).
- Ana iya zaɓin abubuwan da ake buƙata don bin shigar da wutar lantarki 1 ko Shigarwa 2. Fitowa voltage na kowane fitarwa iri ɗaya ne da shigar voltage na shigar da aka zaɓa.
Duba Input/Fitarwa Voltage Ratings, pg. 7. - Damuwawar tiyata.
Kashe Haɗin Ƙararrawar Wuta:
- Cire haɗin ƙararrawa na Wuta (latching ko rashin kullewa) ana iya zaɓin ɗaiɗaiku don kowane ko duk na sha biyu (12).
Zaɓuɓɓukan shigar da ƙararrawar wuta:
a) Akan buɗe [NO] ko kuma rufe [NC] busasshen shigar da lamba. Shigar da juyar da polarity daga da'irar siginar FACP. - An ƙididdige shigarwar FACP WET 5-30VDC 7mA.
- Shigar da FACP EOL yana buƙatar 10K ƙarshen resistor layi.
- FACP fitarwa relay [NC]:
Ko dai FACP bushe NC fitarwa ko
Haɗin EOL na ciki zuwa ACMS12(CB) na gaba.
ACMS12 Fuse Rating:
- An ƙididdige fis ɗin shigarwa na ainihi 15A/32V kowanne.
- Ana ƙididdige fis ɗin fitarwa 3A/32V.
ACMS12CB PTC Rating:
- Babban shigarwar PTCs an kimanta 9A kowanne.
- Ana ƙididdige fitowar PTC 2.5A.
Alamar LED:
- Blue LED yana nuna cire haɗin FACP.
- Mutum voltage LED yana nuna 12VDC (Green) ko 24VDC (Red).
Muhalli:
- Yanayin aiki: 0ºC zuwa 49ºC na yanayi.
- Humidity: 20 zuwa 93%, mara taurin kai.
Makanikai:
- Girman allo (W x L x H kimanin): 7.3" x 4.1" x 1.25" (185.4mm x 104.1mm x 31.8mm)
- Nauyin samfur (kimanin): 0.7 lb. (0.32 kg).
- Nauyin jigilar kaya (kimanin): 0.95 lb. (0.43 kg).
Umarnin Shigarwa:
Hanyoyin wayoyi za su kasance daidai da Lambar Lantarki ta Ƙasa NFPA 70/NFPA 72/ ANSI / Lambar Lantarki ta Kanada / CAN/ULC-S524/ULC-S527/ULC-S537, kuma tare da duk lambobin gida da hukumomin da ke da iko. An yi nufin samfurin don amfani da bushewar gida kawai.
Koma zuwa Umarnin Shigarwa na Ƙarshen Majalisa don hawan Rev. MS050913.
A hankali sakeview:
| LED Diagnostics | (shafi na 5) | Tsarin aikace-aikace na yau da kullun | (shafi na 6) |
| Teburin Gano Tasha | (shafi na 5) | Zane-zane na ƙugiya | (shafi na 9-10) |
Shigarwa:
- Dutsen ACMS12/ACMS12CB a cikin wurin da ake so/makullin. Lokacin hawa ACMS12/ACMS12CB kadai, yi amfani da masu sarari mata/mace (an samar). Lokacin hawa tare da zaɓin VR6 voltage mai tsarawa, yi amfani da masu sarari na mata/mace (an bayar) tsakanin ACMS12/ACMS12CB da VR6 (Fig. 6, shafi 6).
Haɗa ACMS12/ACMS12CB zuwa masu sarari masu amfani da 5/16" skru na kwanon rufi (an samar).
Haɗin kai:
- Tabbatar cewa duk masu tsalle-tsalle [OUT1] - [OUT12] an sanya su a cikin KASHE (tsakiya).
- Haɗa ƙaramin voltage DC yana ba da wutar lantarki zuwa tashoshi masu alamar [+ PWR1 -], [+ PWR2 -]
- Saita kowane fitarwa [OUT1] - [OUT12] zuwa hanyar wutar lantarki daga wutar lantarki 1 ko 2 (Fig. 1, shafi 3).
Lura: Auna fitarwa voltage kafin haɗa na'urori.
Wannan yana taimakawa guje wa lalacewa mai yuwuwa. - Kashe wuta kafin haɗa na'urori.
Ayyuka:
Muhimmi: Abubuwan da aka shigar/fitarwa da maɓallan su an haɗa su (Fig. 3, shafi 4). - Zaɓuɓɓukan fitarwa: ACMS12 (CB) zai samar da wutar lantarki har zuwa goma sha biyu (12)
Abubuwan da aka Canja Wuta:
Haɗa shigar da na'urar da ake kunna wutar lantarki zuwa tashoshi masu alama [- Output1 +] ta hanyar [- Output12 +] a hankali lura da polarity.
• Don Fail-Safe aiki nunin faifan fitarwa mai sarrafa dabaru na DIP mai alamar [fitarwa] don shigarwa mai dacewa a cikin ON matsayi (Fig. 3, a dama).
• Don Fail-Secure aiki nunin faifan fitarwa mai sarrafa dabaru na DIP mai alamar [fitarwa] don shigar da daidai cikin matsayin KASHE (Fig. 3, a dama). - Kunna babban wuta bayan an haɗa duk na'urori.
Muhimmi: Abubuwan da aka shigar/fitarwa da maɓallan su an haɗa su (Fig. 3, shafi 4). - Zaɓuɓɓukan Ƙarfafa Shigarwa:
Lura: Idan ba a yi amfani da cire haɗin Ƙararrawar Wuta ba, haɗa resistor 10K Ohm zuwa tashoshi masu alama [GND da EOL], da haɗa jumper zuwa tashoshi masu alama [GND, RST].
Shigarwa Akan Buɗe (NO):
Slide shigar da dabaru na Slide DIP mai alama [NO-NC] don shigar da ta dace cikin matsayin KASHE (Fig. 4, a dama). Haɗa wayoyi zuwa tashoshi masu alamar [+ INP1 -] zuwa [+ INP12 -].
Shigarwar Akan Rufe (NC):
Slide shigarwar dabarar dabarar DIP mai alamar [NO-NC] don shigar da daidai cikin matsayi ON (Fig. 4, a dama). Haɗa wayoyi zuwa tashoshi masu alamar [+ INP1 -] zuwa [+ INP12 -].
Buɗe Shigar Mai Tari:
Haɗa shigar da buɗaɗɗen shigarwar nutsewar mai tarawa zuwa tashar da aka yiwa alama [+ INP1 -] zuwa [+ INP12 -].
Jika (Voltage) Kanfigareshan shigarwa:
A hankali lura da polarity, haɗa voltage shigar da wayoyi masu jawowa da kuma samar da resistor 10K zuwa tashoshi masu alamar [+ INP1 -] zuwa [+ INP12 -].
Idan ana amfani da voltage don kunna shigarwa - saita madaidaicin INP Logic sauyawa zuwa matsayi "ON".
Idan cire voltage don kunna shigarwa - saita madaidaicin INP Logic sauyawa zuwa matsayin "KASHE".
- Zaɓuɓɓukan Interface Ƙararrawa:
Rufe [NC], yawanci buɗewa [NO] shigarwar ko shigar da juzu'i na polarity daga da'irar siginar FACP zai haifar da zaɓin abubuwan da aka zaɓa.
Don ba da damar cire haɗin FACP don dabarar sarrafa fitarwar nunin faifai
Maɓallin DIP mai alamar [FACP] don daidaitaccen fitarwa ON (Fig. 5, a dama).
Don musaki Cire haɗin FACP don dabarar sarrafa fitarwar nunin faifai
Maɓallin DIP mai alamar [FACP] don daidaitaccen fitarwa (Fig. 5, a dama).
Yawan Buɗe Shigarwa:
Waya gudun ba da sandar FACP ɗin ku da resistor 10K a layi daya tare da tashoshi masu alamar [GND] da [EOL].
Shigarwa Akan Rufe:
Wire relay na FACP ɗin ku da resistor 10K a jere tare da tashoshi masu alamar [GND] da [EOL].
Shigar da siginar siginar FACP:
Haɗa tabbataccen (+) da korau (-) daga fitowar sigina na FACP zuwa tashoshi masu alama [+ FACP -]. Haɗa FACP EOL zuwa tashoshi masu alamar [+ RET -] (an yi la'akari da polarity a cikin yanayin ƙararrawa).
Kashe Haɗin Ƙararrawar Wuta mara Latsawa:
Haɗa jumper zuwa tashoshi masu alama [GND, RST].
Cire Haɗin Ƙararrawar Wuta:
Haɗa NO na buɗe sake saiti na yau da kullun zuwa tashoshi masu alama [GND, RST]. - FACP Dry NC fitarwa:
Lokacin da daisy-chaining siginar ƙararrawa ta wuta tsakanin alluna biyu, haɗa [NC & C] na ACMS12 (CB) na farko zuwa [GND & EOL] na ACMS12(CB) na gaba. Sanya EOL jumper a kan tsakiya da na kasa fil.
Lokacin amfani da wannan fitarwa azaman busasshen lamba NC sanya EOL jumper akan tsakiya da manyan fil.
Daisy Chaining Biyu (2) ACMS12(CB)
Masu Sarrafa Wutar Lantarki na Fitowa Biyu:
Yi amfani da 18 AWG ko mafi girma UL Listed waya sanye take da 1/4" UL Gane tashoshi masu saurin haɗawa da aka ƙididdige su don ingantaccen vol.tage/na halin yanzu don duk haɗin haɗin jumper.
- Haɗa madaidaicin sandar hukumar ACMS12(CB) mai alamar [PWR1 +] zuwa tashar ACMS12(CB) ta biyu mai alamar [+ PWR1].
- Haɗa na farko ACMS12(CB) ta spade lug alama [COM –] zuwa na biyu ACMS12(CB) tasha na hukumar mai alama [PWR1 –].
- Haɗa madaidaicin sandar hukumar ACMS12(CB) mai alamar [PWR2 +] zuwa tashar ACMS12(CB) ta biyu mai alamar [+ PWR2].
LED Diagnostics:
ACMS12 da ACMS12CB Mai Kula da Wutar Lantarki
| LED | ON | KASHE |
| LED 1-LED 12 (ja) | Relay(s) na fitar da kuzari. | Relay(s) na fitar da kuzari. |
| Farashin FACP | An kunna shigar da FACP (yanayin ƙararrawa). | FACP na al'ada (yanayin rashin ƙararrawa). |
| Koren Fitowa 1-12 | Saukewa: 12VDC | - |
| Jajayen Fitowa 1-12 | Saukewa: 24VDC | - |
Teburin Gano Tasha:
ACMS12 da ACMS12CB Mai Kula da Wutar Lantarki
| Labarin Ƙarshe | Aiki/Bayyana |
| PWR1- | 12 ko 24 VDC daga wutar lantarki. |
| PWR2- | 12 ko 24 VDC daga samar da wutar lantarki ko dai 5 ko 12 VDC daga mai sarrafa VR6. |
| + INP1 - ta hanyar + INP12 |
Goma sha biyu (12) masu zaman kansu Buɗaɗɗen Al'ada (NO), Kullum Rufe (NC), Buɗe Mai Tarin Tara ko Rigar Input Triggers. |
| C, NC | FACP Dry NC fitarwa ko haɗin EOL na ciki zuwa ACMS12(CB) na gaba. |
| GND, RST | FACP interface latching ko rashin latching. NO bushe shigarwa. Matsayi na 2 mai iyaka. Don a gajarta don ƙirar FACP mara amfani ko Latch FACP sake saiti. |
| GND, EOL | EOL Tashoshin shigarwar FACP mai kulawa don juyar da aikin FACP na polarity. Matsayi na 2 mai iyaka. |
| - F, + F, - R, + R | Shigar da siginar siginar FACP da tasha. Matsayi na 2 mai iyaka. |
| - Fitowa 1 + ta hanyar - Fitowa 12 + |
Goma sha biyu (12) zaɓaɓɓun abubuwan sarrafawa masu zaman kansu (Rashin-Safe ko Fail-Secure). |
Tsarin aikace-aikace na yau da kullun:
Input/Fitarwa Voltage Ratings
| Shigar da Voltage da Source | Fitarwa Voltage Rating |
| 5VDC (Daga mai sarrafa VR6) | Saukewa: 5VDC |
| 12V (daga mai sarrafa VR6) | Saukewa: 12VDC |
| 12VDC (daga waje samar da wutar lantarki) | 11.7-12VDC |
| 24VDC (daga waje samar da wutar lantarki) | 23.7-24VDC |
Matsakaicin Samar da Wutar Lantarki na Altronix:
| UL da aka jera ko Gane Samar da Wuta | Fitarwa Voltage Saiti | Max. Fitowar Yanzu |
| Bayani na AL400ULXB2/eFlow4NB | 12VDC ko 24VDC | 4A |
| Saukewa: AL600ULXB/eFlow6NB | 12VDC ko 24VDC | 6A |
| Saukewa: AL1012ULXB/eFlow102NB | Saukewa: 12VDC | 10 A |
| Bayani na AL1024ULXB2/eFlow104NB | Saukewa: 24VDC | 10 A |
| VR6 | 5VDC ko 12VDC | 6A |
VR6 - Voltage Regulator
Ƙarsheview:
VR6 voltage regulator yana canza shigarwar 24VDC zuwa fitarwar 5VDC da aka tsara ko 12VDC. An ƙirƙira shi musamman don yin aiki tare da ACMS12(CB) ta hanyar ba da izinin hawa Mai Kula da Wutar Lantarki kai tsaye a saman VR6 don adana sararin rufewa da sauƙaƙe haɗi. Koma zuwa Jagoran Shigar VR6 Rev. 050517.
Ƙayyadaddun bayanai:
Input / Fitarwa:
- Shigarwa: 24VDC @ 1.75A - Fitarwa: 5VDC @ 6A.
- Shigarwa: 24VDC @ 3.5A - Fitarwa: 12VDC @ 6A.
Fitowa:
- 5VDC ko 12VDC kayyade fitarwa.
- Ƙimar fitarwa 6A max.
- Damuwawar tiyata.
Alamar LED:
- LEDs masu shigarwa da fitarwa.
Kayan lantarki:
- Yanayin aiki: 0ºC zuwa 49ºC na yanayi.
- Humidity: 20 zuwa 93%, mara taurin kai.
Makanikai:
- Nauyin samfur (kimanin): 0.4 lb. (0.18 kg).
- Nauyin jigilar kaya (kimanin): 0.5 lb. (0.23 kg).
Haɗa ACMS12(CB) zuwa VR6:
- Ɗaure masu sarari na maza/mace (an samar da) zuwa pems waɗanda suka dace da ƙirar ramin don VR6 a cikin wurin da ake so. Yi amfani da sarari na ƙarfe don rami mai hawa tare da ƙirar tauraro (Fig. 7a, shafi 8).
- Toshe-in namiji 8-pin connector zuwa mace 8-pin receptacle a kan VR6 board (Fig. 7, shafi. 8).
- Ƙarfafa masu sarari na mace/mace zuwa ga maza da mata (Fig. 7, shafi 8).
Yi amfani da tazarar ƙarfe akan rami mai hawa tare da ƙirar tauraro (Fig. 7a, shafi 8). - Daidaita mahaɗin 8-pin na maza da matattarar ACMS12/ACMS12CB, sannan ku haɗa allo zuwa sararin samaniya ta amfani da 5/16” skru na kwanon rufi (Hoto 7, shafi 8).
- Haɗa wutar lantarki na 24VDC zuwa tashar da aka yiwa alama [+ PWR1 -] na ACMS12/ACMS12CB (Fig. 8, shafi 7).
- Zaɓi fitarwa voltage 5VDC ko 12VDC ta amfani da sauyawa [S1] akan VR6.
- Cikakkun matakai 4-10 (shafi na 3-4).
Zane-zane na Ƙunƙwasa:
Hoto 8 - Daisy-sarkar daya ko fiye ACMS12 raka'a.
Ya kamata a shigar da EOL Jumper [EOL JMP] a matsayin EOL. Rashin Latsawa.
Hoto 9 - Daisy-sarkar daya ko fiye ACMS12 raka'a.
Ya kamata a shigar da EOL Jumper [EOL JMP] a matsayin EOL. Latching Single Sake saiti.
Hoto 10 - Sarkar Daisy ɗaya ko fiye ACMS12 raka'a.
Ya kamata a shigar da EOL Jumper [EOL JMP] a matsayin EOL. Latching Mutum Sake saitin.
Hoto 10 - Shigar da juyar da polarity daga fitowar sigina ta FACP (an yi la'akari da polarity a yanayin ƙararrawa).
Rashin Latsawa.
Hoto 11 - Shigar da juyar da polarity daga fitowar siginar FACP (an yi la'akari da polarity a yanayin ƙararrawa).
Latching.
Hoto 12 – Shigar da fararwa ta al'ada Rufe
(Ba Latching).
Hoto 13 – Shigar da fararwa ta al'ada Rufe
(Latching).
Hoto 14 – Buɗe shigar da fararwa kullum
(Ba Latching).
Hoto 15 – Buɗe shigar da fararwa kullum
(Latching).
Bayanan kula:-
Altronix baya da alhakin kowane kuskuren rubutu.
140 58th Street, Brooklyn, New York 11220 Amurka
waya: 718-567-8181
fakis: 718-567-9056
website: www.altronix.com
e-mail: info@altronix.com
Garanti na rayuwa
IIACMS12/ACMS12CB I01V
ACMS12/CB Jagoran Shigar Ƙarshen Taro
Takardu / Albarkatu
 |
Altronix ACMS12 Series Sub Majalisar Samun Masu Sarrafa Wuta [pdf] Jagoran Shigarwa ACMS12, ACMS12CB, ACMS12 Series Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfi, Ƙwararrun Ƙwararrun Ƙwararrun Ƙwararru, Masu Sarrafa Wutar Wuta, Masu Sarrafa Wuta |