Altronix Maximal11FV Maximal FV Series Dual Power Samar da Wutar Lantarki Jagoran Shigar Masu Sarrafa Wuta

Altronix MaximalFV Samun Wuta/Masu sarrafawa suna rarrabawa da canza wuta don samun damar tsarin sarrafawa da na'urorin haɗi. Suna juyar da 220VAC (kewayon aiki 198VAC – 256VAC), shigarwar 50/60Hz zuwa goma sha shida (16) mai sarrafa 12VDC ko 24VDC mai kariya mai kariya. Ana iya canza waɗannan fitilun-Safe/Rashin-Tsarowar wutar lantarki zuwa lambobin busassun nau'ikan “C”. Ana kunna abubuwan da aka fitar ta hanyar buɗaɗɗen ruwa mai tattarawa ko kuma buɗe (NO) busassun shigar da busassun shigarwa daga Tsarin Kulawa, Maɓalli, Maɓallin turawa, REX PIR, da sauransu. Raka'a za su tura wuta zuwa na'urori masu sarrafa dama iri-iri ciki har da: Mag Locks , Yajin Wutar Lantarki, Masu riƙe Ƙofa na Magnetic, da sauransu. Fannin FACP yana ba da damar gaggawar gaggawa, Kula da ƙararrawa, ko ana iya amfani da su don kunna wasu na'urori masu taimako. Siffar cire haɗin ƙararrawar wuta ana iya zaɓa ɗaya ɗaya don kowane ko duka na sha shida (16).

Jadawalin Kanfigareshan MaximalFV:

Lambar Model Altronix	Fitowar DC mai ƙima Voltage Zabuka								Matsakaicin Kayayyakin Yanzu don Main da Aux. Abubuwan da aka fitar (Samar da Wutar Lantarki 1 / Wutar Lantarki 2) (A)	Abubuwan da aka Kare Fuse	220VAC 50/60 Hz Input (na yanzu)	A halin yanzu kowane fitarwa na ACM8 (A)	Ƙididdiga Fuse na Hukumar Samar da Wuta	Ƙimar Ƙarƙashin Ƙarƙashin Ƙarƙashin Batir	ACM8 Input Fuse Rating
	Samar da Wutar Lantarki 1				Samar da Wutar Lantarki 2
	[DC]		[AUX]		[DC]		[AUX]
	12VDC Fitar Range (V)	24VDC Fitar Range (V)	12VDC Fitar Range (V)	24VDC Fitar Range (V)	12VDC Fitar Range (V)	24VDC Fitar Range (V)	12VDC Fitar Range (V)	24VDC Fitar Range (V)
Matsakaicin 11FV	eFlow4NBV				eFlow4NBV				-	16	4.2 A	2.5	5A/ 250V	7.5A/ 32V	10A/ 250V
	10.1- 13.2	-	10.05- 13.2	-	10.1- 13.2	-	10.05- 13.2	-	3.3A + 3.3 A
	10.1- 13.2	-	10.05- 13.2	-	-	20.28- 26.4	-	20.2- 26.4	3.3A + 3.6 A
	-	20.28- 26.4	-	20.2- 26.4	-	20.28- 26.4	-	20.2- 26.4	3.6A + 3.6 A
Matsakaicin 33FV	eFlow6NBV				eFlow6NBV				-	16	4.2 A	2.5	5A/ 250V	10A/ 32V	10A/ 250V
	10.0- 13.2	-	10.03- 13.2	-	10.0- 13.2	-	10.03- 13.2	-	5.3A + 5.3 A
	10.0- 13.2	-	10.03- 13.2	-	-	20.19- 26.4	-	20.19- 26.4	5.3A + 5.6 A
	-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	-	20.19- 26.4	5.6A + 5.6 A
Matsakaicin 55FV	eFlow102NBV				eFlow102NBV				-	16	4.2 A	2.5	5A/ 250V	15A/ 32V	10A/ 250V
	10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-	10.03- 13.2	-	9.3A + 9.3 A
Matsakaicin 75FV	eFlow102NBV				eFlow104NBV				-	16	4.8 A	2.5	5A/250V (eFlow102NBV) 6.3A/250V (eFlow104NBV)	15A/ 32V	10A/ 250V
	10.03- 13.2	-	10.03- 13.2	-	-	20.17- 26.4	-	20.28- 26.4	9.3A + 9.6 A
Matsakaicin 77FV	eFlow104NBV				eFlow104NBV				-	16	5.4 A	2.5	6.3A/250V	15A/ 32V	10A/ 250V
	-	20.17- 26.4	-	20.28- 26.4	-	20.17- 26.4	-	20.28- 26.4	9.6A + 9.6 A

Siffofin MaximalFV

Modulolin Mai Kula da Wutar Lantarki ACM8:

Goma sha shida (16) suna jawo abubuwan sarrafawa da kansu. Zaɓuɓɓukan fitarwa:
a) Goma sha shida (16) Fail-Safe tace wutar lantarki.
b) Sha shida (16) Fail-Secure tace wutar lantarki.
c) Goma sha shida (16) suna samar da abubuwan fitarwa na “C” (ƙididdigar @ 5A/28VDC ko VAC).
d) Duk wani hade na sama.
Goma sha shida (16) Shigar da tsarin sarrafawa yana jawo abubuwan shiga. Zaɓuɓɓukan shigar da kunnawa:
a) Goma sha shida (16) na buɗewa (NO) busassun abubuwan shigar da busassun abubuwa.
b) Sha shida (16) abubuwan shigar masu tarawa.
c) Duk wani hade na sama.

Goma sha shida (16) tace aux. abubuwan wuta (ana kimanta abubuwan da aka fitar @ 2.5A).
LEDs ja akan allon ACM8 suna nuna fitowar mutum ɗaya ta jawo (ƙarfafa relays).

Cire haɗin ƙararrawa na Wuta (latching ko rashin latching) ana iya zaɓin ɗaiɗaiku don kowane ko duka na takwas (8).
Zaɓuɓɓukan shigar da ƙararrawa na Wuta:
a) Buɗewa ta al'ada (NO) ko rufewa (NC) busasshen shigar da busassun.
b) Shigar da juyar da polarity daga da'irar siginar FACP.
Green LED akan allon ACM8 yana nuna cire haɗin FACP.

Fassarar fitarwa ta FACP yana nuna cewa an kunna shigar da FACP (nau'in lamba "C" mai ƙima @ 1A/28VDC).
Samar da Wutar Wuta/Caja na eFlow yana ba da iko gama gari don hukumar ACM8 (wayoyin masana'anta) da duk na'urorin sarrafa damar shiga (wiring filin).

Ana kimanta manyan fis ɗin allo na ACM8 @ 10A. Ana kimanta fis ɗin fitarwa @ 3.5A. Samar da Wutar Wuta/Caji:
Shigarwa: 220VAC 50/60Hz.
Don fitarwa voltage da samar da halin yanzu koma zuwa MaximalFV Series Kanfigareshan Chart, shafi. 3.

Mahimmin fitarwa na taimako @ 1A (ba a canza ba).
Ƙarfafawatage kariya.
Caja da aka gina a ciki don rufaffiyar gubar acid ko nau'in batura na gel.
Matsakaicin caji na yanzu 1.54A.
Canja atomatik zuwa baturin jiran aiki lokacin da AC ta gaza. Canja wurin zuwa ƙarfin baturi yana nan take ba tare da katsewa ba.

Cire haɗin Ƙararrawar Wuta da ake kulawa (latching ko mara latching) 10K EOL resistor. Yana aiki akan fararwa na yau da kullun (NO) ko rufaffiyar (NC).
AC gaza kulawa (form "C" lambobin sadarwa).
gazawar baturi & kasancewar sa ido (form "C" lambobin sadarwa).
Ƙarfin wutar lantarki. Yana rufe tashoshin fitarwa na DC idan baturi voltage ya faɗi ƙasa 71-73% don raka'a 12V da 70-75% don raka'a 24V (dangane da wutar lantarki). Yana hana zurfafa fitar da baturi.

Don ƙimar fis koma zuwa MaximalFV Series Kanfigareshan Chart, shafi. 3.
Green AC Power LED yana nuna 220VAC yanzu.
Shigar da AC da alamun fitarwa na LED.
Gajeren kewayawa da kariyar wuce gona da iri.
Yakin yana ɗaukar batura har zuwa huɗu (4) 12VDC/12AH.
Girman yadi (H x W x D): 26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm).

Umarnin Shigar MaximalFV

Hanyoyin wayoyi za su kasance daidai da Lambar Lantarki ta Ƙasa/NFPA 70/ANSI, Lambar Lantarki ta Kanada, Sashe na I, Sashe na II kuma tare da duk lambobin gida da hukumomi masu iko. An yi nufin samfurin don amfanin cikin gida
kawai.

Kayan Wutar Lantarki LED Diagnostics
Samun damar Mai Kula da Wutar Lantarki LED Diagnostics
Ƙirar Tasha Tashar Tashar Wuta
Samun Gano Tasha Mai Kula da Wuta
Ƙimar Samar da Wutar Lantarki Takaddun Bayanan Baturi
Fitar da Wutar Lantarki Voltage Saituna
Hannun Hannun Aikace-aikacen Mai Gudanar da Wuta
Zane-zane na Ƙirar Ƙimar Ƙarfafawa na FACP/Zaɓi

Dutsen naúrar a wurin da ake so. Yi alama da ramuka a bango don yin layi tare da manyan rijiyoyin maɓalli uku a cikin shingen. Shigar da manyan haɗe-haɗe guda uku da sukurori a bango tare da ɗumbin kawunan suna fitowa. Sanya manyan rijiyoyin maɓalli na sama sama da sukurori uku na sama, matakin kuma amintattu. Alama matsayi na ƙananan ramuka uku. Cire shingen. Hana ƙananan ramuka kuma shigar da masu ɗaure uku. Sanya ramukan maɓalli na sama sama da sukurori uku na sama. Shigar da ƙananan sukurori uku kuma tabbatar da ƙarfafa duk screws (Ƙaƙwalwar Ƙirar, shafi.).

Haɗa ƙarfin AC mara kunnawa (220VAC 50/60Hz) zuwa tashoshi masu alama [L, N] (Hoto 3,).
Yi amfani da 14 AWG ko mafi girma don duk haɗin wutar lantarki. Amintaccen koren waya yana kaiwa zuwa ƙasa lug.
Kiyaye iyakataccen wayoyi daban da wayoyi marasa iyaka.
Dole ne a samar da tazara mafi ƙarancin 0.25.
HANKALI: Kar a taɓa sassan ƙarfe da aka fallasa. Kashe wutar da'irar reshe kafin shigarwa ko kayan aiki. Babu sassa masu amfani a ciki. Koma shigarwa da hidima ga ƙwararrun ma'aikatan sabis.
Zaɓi fitarwa DC da ake so voltage ta hanyar saita SW1 zuwa matsayi mai dacewa a kan tashar wutar lantarki (Maximal11FV da Maximal33FV, Fig. 1, shafi 9). Maximal55F samar da wutar lantarki an saita masana'anta a 12VDC. Maximal77F samar da wutar lantarki an saita masana'anta a 24VDC. Maximal75F ya ƙunshi allon samar da wutar lantarki guda ɗaya (1) wanda masana'anta ke saita a 12VDC, da kuma allon samar da wutar lantarki ɗaya (1) wanda masana'anta ke saita a 24VDC.

Auna fitarwa voltage na naúrar kafin haɗa kowane na'ura don tabbatar da aiki mai kyau.
Ba daidai ba ko high voltage zai lalata waɗannan na'urori.
Zaɓuɓɓukan fitarwa (Hoto 2,):
Naúrar za ta samar da ko dai guda goma sha shida (16) da aka canza wutar lantarki, sha shida (16) busasshen nau'in "C", ko duk wani haɗin da aka canza da kuma samar da fitowar "C".
(a) Fail-Safe Canja Wutar Wuta:
Don Rashin-Safe aiki haɗa ingantaccen shigarwar (+) na na'urorin sarrafa damar shiga zuwa tasha alama
[NC]. Haɗa shigarwar mara kyau (-) na na'urorin sarrafa damar shiga zuwa tasha mai alama [COM].
(b) Fail-Secure Canja Wutar Wuta:
Don Aiwatar da Amintaccen aiki haɗa ingantaccen shigarwar (+) na na'urorin sarrafa shiga zuwa tasha mai alama [NO]. Haɗa shigarwar mara kyau (-) na na'urorin sarrafa damar shiga zuwa tasha mai alama [COM].
(c) Form "C" abubuwan fitarwa:
Lokacin da ake son fitar da nau'i na "C" dole ne a cire fis ɗin fitarwa daidai (1-8) na kowane kwamiti na ACM8.

Abubuwan Wutar Taimako na ACM8 (ba a kunna ba):
Haɗa na'urorin sarrafa damar shiga waɗanda ke buƙatar iko akai-akai zuwa tashoshi masu alama [C] tabbatacce (+) da [COM] korau (-). Ana iya amfani da abubuwan da aka fitar don samar da wuta ga masu karanta kati, faifan maɓalli da dai sauransu. eFlow Auxiliary results (ba a kunna):
Don haɗin na'ura mai taimako wannan fitarwa ba zai shafe shi ta Ƙarƙashin Haɗin Wuta ko Ƙararrawar Wuta
Interface. Haɗa na'urar zuwa tashoshi masu alamar [+ AUX -] (Hoto 3,).
Zaɓuɓɓukan shigar da kunnawa (Hoto 2):
(a) Kullum Buɗe [NO] shigar da fararwa:
Ana kunna abubuwan shigarwa 1-8 ta hanyar buɗewa ko buɗe abubuwan shigar da ruwa mai tarawa. Haɗa abubuwan sarrafa ikon samun dama, faifan maɓalli, maɓallan turawa, REX PIRs, da sauransu zuwa tashoshi masu alama [IN] da [GND].
(b) Buɗe abubuwan shigar da Mai Tari:
Haɗa kwamitin kula da hanyar shiga buɗaɗɗen mai tarawa tabbatacce (+) zuwa tashoshi masu alama [IN] da korau (-) zuwa tashoshi masu alama [GND].

Zaɓuɓɓukan Interface Ƙararrawar Wuta ACM8 (Figs. 5-9):
Rufewar [NC] ko buɗe [NO] da aka saba buɗewa daga rukunin kula da ƙararrawa na wuta ko shigarwar juyar da polarity daga da'irar siginar FACP zai shafi abubuwan da aka zaɓa. Don ba da damar cire haɗin FACP don fitarwa, kunna madaidaicin sauyawa (s) [SW1-SW8] akan kowane allon ACM8. Don musaki cire haɗin FACP don fitarwa, kunna madaidaicin (s) [SW1-SW8] ON akan kowane allon ACM8.
(a) Buɗe [NO] yawanci:
Don ƙugiya mara latch koma zuwa hoto 6,. Domin latch ƙugiya koma zuwa siffa 7,.
(b) Akan rufe [NC] shigarwa:
Don ƙugiya mara latching koma zuwa Hoto 8. Don latching ƙugiya koma zuwa siffa 9,.
(c) FACP Siginar shigar da madauri mai faɗakarwa:
Haɗa tabbataccen (+) da korau (-) daga fitowar sigina na FACP zuwa tashoshi masu alama [+ INP -]. Haɗa FACP EOL zuwa tashoshi masu alamar [+ RET -] (an yi la'akari da polarity a cikin yanayin ƙararrawa). Jumper dake kusa da TRG LED dole ne a yanke (Fig. 6).
FACP Dry form “C” fitarwa (Ba a kimanta ta UL) (Hoto 2a):
FACP form “C” lambobin sadarwa za a iya amfani da su jawo rahoto ko sigina na'urorin. Waɗannan lambobin sadarwa suna canzawa akan shigar da ƙararrawar wuta zuwa allon ACM8.

Haɗin baturi na tsaye (Hoto 3):
Don aikace-aikacen Ikon Samun batir batir na zaɓi ne. Lokacin da ba a yi amfani da batura ba, asarar AC zai haifar da asarar juzu'in fitarwatage. Lokacin da ake son amfani da batura masu aiki, dole ne su zama nau'in gubar acid ko gel.
Haɗa baturi zuwa tashoshi masu alama [- BAT +] (Hoto 3, shafi 10). Yi amfani da batura guda biyu (2) 12VDC da aka haɗa a jeri don aikin 24VDC (an haɗa da jagororin baturi). Yi amfani da batura - Casil CL1270 (12V/7AH), CL12120
(12V/12AH), CL12400 (12V/40AH), CL12650 (12V/65AH) batura ko UL gane batir BAZR2 da BAZR8 na ƙimar da ta dace.
Fitowar Baturi da AC (Hoto 3):
Ana buƙatar haɗa na'urori masu ba da rahoton matsala masu kulawa zuwa abubuwan da aka yiwa alama [AC Fail, BAT Fail] na'urorin sa ido masu alama [NC, C, NO] zuwa na'urorin sanarwar gani da suka dace.
Yi amfani da 22 AWG zuwa 18 AWG don gazawar AC da Ƙananan / Babu rahoton baturi.
Don jinkirta rahoton AC na sa'o'i 2., saita canjin dip [AC Jinkiri] zuwa matsayin KASHE (Hoto 3).
Don jinkirta rahoton AC na 1 min., saita canjin tsoma [AC Jinkiri] zuwa Matsayin ON (Fig. 3).
Kashe Haɗin Ƙararrawar Wuta (Hoto 3):
Don kunna Ƙararrawar Wuta Cire haɗin saitin tsoma [Rufewa] zuwa Matsayin ON.
Don kashe Ƙararrawar Wuta Cire haɗin saitin tsoma (Rufewa) zuwa KASHE matsayi.
Shigar da tamper canza (Ba a Haɗe) (Hoto 3b):
Dutsen UL Jerin tamper switch (Honeywell Model 112 ko makamancin haka) a saman shingen. Zamar da tampmadaidaicin madaidaicin madaidaicin zuwa gefen shingen kusan 2” daga gefen dama (Fig. 3b).
Haɗa tampCanja wayoyi zuwa shigar da Panel Control Panel ko ingantaccen rahoton UL Listed
na'urar. Don kunna siginar ƙararrawa buɗe ƙofar kewayen.
Abubuwan shigar da wutar lantarki da yawa (Hoto 2):
Lokacin amfani da ƙarin wutar lantarki na waje, masu tsalle J1 da J2 da ke kan allon ACM8 daidai dole ne a yanke (Fig. 2c, 2d, da Fig. 5). Haɗa samar da wutar lantarki ta hanyar samun damar waje zuwa tashoshi masu alamar [- Control +] (Wadannan tashoshi suna daidaita da tashoshi na [- Power +]). Lokacin amfani da kayan wuta na DC, dole ne a lura da polarity. Lokacin amfani da kayan wuta na AC, ba a lura da polarity ba (Fig. 2d, shafi 9). Dole ne a yi duk hanyoyin haɗin yanar gizo ta amfani da ma'auni mai dacewa CM ko FPL waya mai jaket (ko madaidaicin daidai) (Hoto 4a).

Kulawa

Ya kamata a gwada naúrar aƙalla sau ɗaya a shekara don aikin da ya dace kamar haka:

Kulawa na FACP: Don tabbatar da ingantacciyar haɗi da aiki na cire haɗin haɗin ƙararrawar Wuta. Da fatan za a bi hanyar da ta dace a ƙasa:

Yawan Buɗe Shigarwa: Sanya gajere tsakanin tashoshi masu alamar [T] da [+ INP] zai haifar da Cire Haɗin Ƙararrawar Wuta. Cire gajeriyar don sake saitawa.

Shigarwa Akan Rufe: Cire waya daga tasha mai alama [INP -] zai haifar da Cire Haɗin Ƙararrawar Wuta. Sauya waya zuwa tasha mai alama [INP -] don sake saitawa.
Shigar da siginar siginar FACP: Wajibi ne don kunna Tsarin Ƙararrawar Wuta. A cikin duk yanayin da ke sama koren TRG LED na ACM8s zai haskaka. Duk abubuwan da aka zaɓa don Cire Haɗin Ƙararrawar Wuta za su kunna na'urorin kullewa.

Lura: Duk abubuwan da aka fitar [OUT 1] - [OUT 8] dole ne su kasance a cikin yanayin al'ada (de-mai kuzari) kafin gwaji. Lokacin da aka saita naúrar don Buɗe Al'ada (Hoto 8) ko Aiki a Rufe (Hoto 10), dole ne a sake saita Haɗin Ƙararrawar Wuta ta kunna Maɓallin sake saiti na Kullum Rufe.

Fitarwa Voltage Gwaji: A ƙarƙashin yanayin kaya na yau da kullun, fitarwar DC voltage ya kamata a duba don daidai voltage matakin (koma zuwa MaximalF jerin Kanfigareshan Chart).

Gwajin Baturi: A ƙarƙashin yanayin kaya na al'ada duba cewa an cika cajin baturin, duba ƙayyadaddun voltage a tashoshin baturi da kuma tashoshin allon allo masu alamar [+ BAT -] don tabbatar da cewa babu karya a cikin wayoyi masu haɗin baturi.
Lura: Matsakaicin cajin halin yanzu shine 1.54A. Rayuwar baturi da ake tsammani shine shekaru 5; duk da haka, ana bada shawarar canza batura a cikin shekaru 4 ko ƙasa da haka idan ya cancanta.

Bayanan Wutar Lantarki LED Diagnostics:

Ja (DC)	Green (AC/AC1)	Matsayin Samar da Wuta
ON	ON	Yanayin aiki na al'ada.
ON	KASHE	Asarar AC. Batir yana ba da ƙarfi ta tsaye.
KASHE	ON	Babu fitarwa na DC.
KASHE	KASHE	Asarar AC. An cire ko babu baturi mai jiran aiki. Babu fitarwa na DC.

Ja (Jemage)	Matsayin baturi
ON	Yanayin aiki na al'ada.
KASHE	Baturi gazawa/ƙarancin baturi.

Samun damar Mai Kula da Wutar Lantarki LED Diagnostics:

LED	ON	KASHE
LED 1-LED 8 (ja)	Relay(s) na fitar da kuzari.	Relay(s) na fitar da kuzari.
Trg (Green)	An kunna shigar da FACP (yanayin ƙararrawa).	FACP na al'ada (yanayin rashin ƙararrawa).

Takaddun Takaddun Takaddun Batir na Hukumar Samar da Wuta:

Baturi	Mafi qarancin 11F	Mafi qarancin 33F	Maximal55F, Maximal75F, da Maximal77F
7AH	Minti 30/4A	Minti 10/6A	Minti 5/10A
12AH	Minti 35/4A	Minti 30/6A	Minti 30/10A
40AH	Sama da Awa 4/4A	Sama da Awa 4/6A	Sama da Awa 2/10A
65AH	Sama da Awa 4/4A	Sama da Awa 4/6A	Sama da Awa 4/10A

Ƙirar Tasha Tashar Tashar Wuta:

Labarin Ƙarshe	Aiki/Bayyana
L, G, N	Haɗa 220VAC 50/60Hz zuwa waɗannan tashoshi: L zuwa zafi, N zuwa tsaka tsaki. Kada a yi amfani da tasha mai alamar [G].
+ DC -	Factory da aka haɗa zuwa allon ACM8.
Ana Kula da Ƙaddamar da EOL	Wuta Ƙararrawa Interface yana jawo shigarwar shigarwa daga gajere ko FACP. Ana iya buɗe abubuwan shigar da ƙara a kullum, galibi ana rufe su daga da'irar fitarwa ta FACP (shigarwa mai iyakacin ƙarfi) (Hoto na 3, shafi na 10).
A'a, Sake saitin GND	FACP interface latching ko rashin latching (iyakantaccen iko) (Hoto na 3, shafi na 10).
+ AUX-	Ƙayyadaddun fitarwa mai iyaka na taimako @ 1A (ba a kunna ba) (Hoto na 3, shafi na 10).
AC FAIL NC, C, NO	Yana nuna asarar wutar AC, misali haɗi zuwa na'ura mai ji ko ƙararrawa. Relay yawanci ana samun kuzari lokacin da wutar AC ta kasance. Ƙimar tuntuɓar 1A @ 30VDC (iyakantaccen wutar lantarki) (Hoto na 3, shafi na 10).
BAT FAIL NC, C, NO	Yana nuna ƙarancin yanayin baturi, misali haɗa zuwa panel ƙararrawa. Relay yawanci yana samun kuzari lokacin da ƙarfin DC ya kasance. Ƙimar lamba 1A @ 30VDC. Ana ba da rahoton cire baturi a cikin mintuna 5. An ba da rahoton sake haɗa baturi a cikin minti 1 (iyakantaccen wuta) (Fig. 3, pg. 10).
+ BAT -	Haɗin baturi na tsaye. Matsakaicin caji na yanzu 1.54A (ba iyakacin ƙarfi) (Fig. 3, pg. 10).

Samun Gano Tasha Mai Kula da Wuta:

Labarin Ƙarshe	Aiki/Bayyana
- Power +	12VDC ko 24VDC daga wutar lantarki / caja (ma'aikata da aka haɗa). Waɗannan tashoshi suna daidaitawa da tashoshi na [- Control +].
– Sarrafa +	Waɗannan tashoshi suna daidaitawa da tashoshi na [- Power +]. Ana iya haɗa waɗannan tashoshi zuwa Wutar Wutar Lantarki mai iyakance iyakataccen ikon amfani da wutar lantarki don samar da keɓantaccen ikon aiki don na'urori (Ba a kimanta ta UL ba). Dole ne a cire Jumpers J1 da J2.
TARBIYYA 1- INPUT 8 IN, GND	Daga budewa da/ko buɗaɗɗen abubuwan shigar da mai tara kaya (buƙatun fita maɓallan, fita pir's, da sauransu)
FITOWA TA 1- Fitarwa 8 NC, C, NO, COM	12VDC zuwa 24VDC yana jawo abubuwan sarrafawa masu sarrafawa. Matsakaicin nauyi a kowace fitarwa shine 2.5A.
	Maximal11FV: P/S 1 – 10.1-13.2VDC @ 3.3AP/S 2 – 10.1-13.2VDC @ 3.3A ko P/S 1 – 20.28-26.4VDC @ 3.6AP/S 2 – 20.28-26.4A ko @ 3.6VDC P/S 1 - 10.1-13.2VDC @ 3.3A da P/S 2 - 20.28-26.4VDC @ 3.6A.
	Maximal33FV: P/S 1 – 10.0-13.2VDC @ 5.3AP/S 2 – 10.0-13.2VDC @ 5.3A ko P/S 1 – 20.28-26.4VDC @ 5.6AP/S 2 – 20.28-26.4A ko @ 5.6VDC P/S 1 - 10.0-13.2VDC @ 5.3A da P/S 2 - 20.28-26.4VDC @ 5.6A.
	Maximal55FV: P/S 1 - 10.03-13.2VDC @ 9.3A da P/S 2 - 10.03-13.2VDC @ 9.3A.
	Maximal75FV: P/S 1 - 10.03-13.2VDC @ 9.3A da P/S 2 - 20.17-26.4VDC @ 9.6A.
	Maximal77FV: P/S 1 - 20.17-26.4VDC @ 9.6A da P/S 2 - 20.17-26.4VDC @ 9.6A.
	Rashin-Safe [NC tabbatacce (+) & COM Negative (-)], Rashin-Secure [NO tabbatacce (+) & COM Negative (-)], fitarwa na taimako [C tabbatacce (+) & COM Korau (-)] ( Lokacin amfani da wutar lantarki ta AC ba a lura da polarity ba), NC, C, NO tuba zuwa busassun sigar “C” 5A 24VAC/VDC da aka ƙididdige abubuwan busassun lokacin da aka cire fis. Lambobin sadarwa suna nunawa a cikin yanayin da ba a kunna ba.
FACP INTERFACE T, + INPUT -	Wuta Ƙararrawa Interface yana jawo shigarwa daga FACP. Ana iya buɗe abubuwan shigar da ƙara a kullum, yawanci rufewa daga fitowar siginar FACP (Hoto 5-9, shafi na 12).
FACP INTERFACE NC, C, NO	Form “C” tuntuɓar tuntuɓar mai lamba @ 1A 28VDC don rahoton ƙararrawa (UL ba ya kimanta).

Fitar da Wutar Lantarki Voltage Saituna:

Hannun Hannun Aikace-aikacen Mai Gudanar da Wuta (na kowane ACM8):

Hoto 3 - Matsakaicin Jerin FV

HANKALI: Lokacin da aka saita allon samar da wutar lantarki don 12VDC yi amfani da baturi ɗaya kawai (1) 12VDC.
Kiyaye iyakataccen wayoyi daban da mara iyaka.
Yi amfani da tazara mafi ƙarancin 0.25 inci.
12AH batura masu caji sune manyan batura waɗanda zasu iya dacewa da wannan shingen. Dole ne a yi amfani da shingen baturi na waje da UL da aka jera idan ana amfani da batura 40AH ko 65AH.

Abubuwan Buƙatun Waya Masu Iyakancin Wutar NEC:
Wayoyin da'ira mai iyaka da mara ƙarfi dole ne su kasance cikin rabuwa a cikin majalisar. Duk wayoyi masu iyakacin wutar lantarki dole ne su kasance aƙalla 0.25” nesa da kowane wayoyi marasa iyaka. Bugu da ƙari, duk na'urorin da'irar da ba ta da iyaka da wutar lantarki dole ne su shiga kuma su fita daga majalisar ta hanyoyi daban-daban.
Daya irin wannan example na wannan aka nuna a kasa. Takamammen aikace-aikacen ku na iya buƙatar yin amfani da ƙwanƙwasawa daban-daban. Ana iya amfani da kowane ƙwanƙwasa magudanar ruwa. Don aikace-aikacen iyakantaccen wutar lantarki amfani da magudanar ruwa zaɓi ne. Dole ne a yi duk hanyoyin haɗin yanar gizo ta amfani da ma'auni mai dacewa CM ko FPL waya mai jaki (ko madaidaicin daidai).
Dole ne a ɗora shingen baturi na zaɓi na UL da aka jera kusa da wutar lantarki ta hanyoyin wayoyi na Class 1.
Don shigarwa na Kanada yi amfani da wayoyi masu kariya don duk haɗin gwiwa.
Lura: Koma zuwa zane mai sarrafa waya a ƙasa don hanyar da ta dace don shigar da waya mai jakin CM ko FPL (Hoto 4a).

Zane-zane na Hook-Up FACP

Hoto 5 Ƙunƙwalwar zaɓi ta amfani da abubuwan shigar da wutar lantarki guda biyu (2) keɓe (An zartar akan Maximal11F kawai, ba UL ya kimanta ba):

Hoto 6 Shigar da juyar da polarity daga fitowar sigina ta FACP (an yi la'akari da polarity a yanayin ƙararrawa):

Hoto 7 Kullum Buɗewa: Ba-Latching FACP shigar da fararwa:

Hoto 8 Kullum Buɗe shigar da faɗakarwa na FACP Latching tare da sake saiti:

Hoto 9 Kullum Rufewa: Ba-Latching FACP shigar da fararwa:

Hoto 10 Kullum Rufewa: Latching shigarwar FACP tare da sake saiti:

Matsakaicin Rukuni (H x W x D kimanin):
26" x 19" x 6.25" (660.4mm x 482.6mm x 158.8mm)

Ana iya Sarrafa da Kula da Samar da Wutar Wuta/Caji na eFlow yayin Bayar da Ƙarfin / Bincike daga Ko'ina akan hanyar sadarwa…

LINQ2 - Module Sadarwar Sadarwar Sadarwa
LINQ2 yana ba da damar IP mai nisa zuwa bayanan lokaci na ainihi daga eFlow wutar lantarki / caja don taimakawa ci gaba da tsarin aiki a matakan mafi kyau. Yana sauƙaƙe shigarwa da sauri da sauƙi da saiti, yana rage girman tsarin lokaci, kuma yana kawar da kiran sabis ɗin da ba dole ba, wanda ke taimakawa rage Jimlar Kudin Mallaka (TCO) - da kuma ƙirƙirar sabon tushen Maimaita Harajin Watanni (RMR).

Siffofin:

UL da aka jera a Amurka da Kanada.
Ikon gida ko na nesa har zuwa (2) fitarwar wutar lantarki ta Altronix eFlow biyu ta LAN da/ko WAN.

Saka idanu bincike na ainihin lokaci: fitarwa na DC voltage, fitarwa na halin yanzu, AC & matsayi/sabis na baturi, canjin yanayin shigarwa, canjin yanayin fitarwa da zafin naúrar.
Ikon samun dama da sarrafa mai amfani: Ƙuntata karanta/rubutu, Ƙuntata masu amfani zuwa takamaiman albarkatu
Biyu (2) na cibiyar sadarwa mai sarrafa Form “C” Relays.
Abubuwan shigar da shirye-shirye guda uku (3): Sarrafa relays da samar da wutar lantarki ta hanyoyin kayan masarufi na waje.

Imel da sanarwar Dashboard na Windows
log log yana bin tarihin.
Secure Socket Layer (SSL).
Shirye-shirye ta hanyar USB ko web mai lilo – ya haɗa da software mai aiki da kebul na USB ƙafa 6.

LINQ2 Yana hawa Ciki da kowane Rukunin MaximalF

Altronix baya da alhakin kowane kuskuren rubutu.
140 58th Street, Brooklyn, New York 11220 USA | waya: 718-567-8181 | fax: 718-567-9056
website: www.altronix.com
e-mail: info@altronix.com
Garanti na rayuwa
IIMaximal11FV/33FV/55FV/75FV/77FV Series H11U

Maximal11VF/33FV/55FV/75FV/77V Jagoran Shigarwa Masu Sarrafa Wutar Lantarki (Fused)

Takardu / Albarkatu

Altronix Maximal11FV Maximal FV Series Dual Power Samar da Wuta Masu Kula da Wuta [pdf] Jagoran Shigarwa
Maximal11FV, Maximal55FV, Maximal11FV Maximal FV Series Dual Power Supply Access Power Controllers, Maximal11FV, MaximalXNUMXFV, Matsakaicin FV Series Dual Power Supply Access Power Controllers, Access Power Controllers, Power Controllers.

Magana

Manual mai amfani

Altronix Maximal11FV Maximal FV Series Dual Power Samar da Wuta Masu Kula da Wuta

MaximalFV Series Overview