Fiye da iko kawai.™

Shiga & Haɗin Wuta
Altronix/SALTO Kits

T2SAK7F8 Trove Access da Haɗin Wuta

Model sun hada da:
Saukewa: T1SAK3F4
Kit ɗin Ƙofa 4 tare da Fused Outpused Kit ɗin da aka haɗa cikakke ya haɗa da:
- Trove1 tare da TSA1 Altronix/SALTO jirgin baya
- (1) eFlow6NB - Samar da wutar lantarki / Caja
– (1) ACM4 – Fused Access Power Controller
- (1) VR6 - Voltage Regulator
- (1) PDS8 - Module Rarraba Wutar Shigarwa Biyu

Saukewa: T2SAK7F8
Kit ɗin Ƙofa 8 tare da Fused Outpused Cikakken kit ɗin da aka haɗa ya haɗa da:
- Trove2 tare da TSA2 Altronix/SALTO jirgin baya
- (1) eFlow104NB - Samar da wutar lantarki / Caja
– (1) ACM8 – Fused Access Power Controller
- (1) VR6 - Voltage Regulator
- (1) PDS8 - Module Rarraba Wutar Shigarwa Biyu

Saukewa: T2SAK75F12
Kit ɗin Ƙofa 12 tare da Fused Outpused Kit ɗin da aka haɗa cikakke ya haɗa da:
- Trove2 tare da TSA2 Altronix/SALTO jirgin baya
- (1) eFlow104NB - Samar da wutar lantarki / Caja
- (1) eFlow102NB - Samar da wutar lantarki / Caja
– (1) ACM8 – Fused Access Power Controller
– (1) ACM4 – Fused Access Power Controller
- (1) PDS8 - Module Rarraba Wutar Shigarwa Biyu

Duk abubuwan da ke cikin waɗannan kayan aikin Trove UL An jera su azaman ƙananan majalisai.
Da fatan za a koma zuwa ga jagororin shigarwa na Ƙarshen Taro don ƙarin bayani.

Jagoran Shigarwa

Duk alamun kasuwanci masu rijista mallakin masu su ne.
Saukewa: TSAK032919

Kamfanin Shiga: _________________________________ Sunan Wakilin Sabis: __________________
Adireshi: ____________________________ Waya #: ____________

Ƙarsheview:

Altronix Trove SALTO kits an riga an haɗa su kuma sun ƙunshi Trove1SA1 ko Trove2SA2 shinge / jirgin baya tare da shigar Altronix wutar lantarki / caja (s) da ƙananan majalisai. Waɗannan kit ɗin kuma suna ɗaukar haɗuwa daban-daban na kayan aikin SALTO har zuwa kofofi goma sha biyu (12) a cikin shinge ɗaya.

Jadawalin Kanfigareshan:

Umarnin Shigarwa:

Hanyoyin wayoyi za su kasance daidai da National Electrical Code/NFPA 70/ANSI, kuma tare da duk lambobin gida da hukumomin da ke da iko.
An yi nufin samfurin don amfanin cikin gida kawai.

1. Cire jirgin baya daga wurin. Kada a jefar da kayan aiki.
2. Yi alama da ramuka a bango don yin layi tare da manyan rijiyoyin maɓalli uku a cikin shingen. Shigar da manyan haɗe-haɗe guda uku da sukurori a bango tare da ɗumbin kawunan suna fitowa. Sanya ramukan maɓalli na sama sama da sukurori uku na sama, matakin, kuma amintattu. Alama matsayi na ƙananan ramuka uku. Cire shingen. Hana ƙananan ramuka kuma shigar da masu ɗaure uku. Sanya ramukan maɓalli na sama sama da sukurori uku na sama. Shigar da ƙananan sukurori uku kuma tabbatar da ƙarfafa duk skru.
3. Dutsen ya haɗa da UL Listed tamper canza (Altronix Model TS112 ko daidai) a cikin wurin da ake so, kishiyar hinge. Zamar da tampmadaidaicin madaidaicin maɓalli a gefen shingen kusan 2” daga gefen dama (Fig. 1, shafi 2). Haɗa tampcanza wayoyi zuwa shigar da Panel Control Panel ko na'urar da aka jera UL mai dacewa. Don kunna siginar ƙararrawa buɗe ƙofar kewayen.
4.  Dutsen SALTO modules zuwa TSA2 jirgin baya, koma shafi. 3, 4, 5.
5. Koma zuwa eFlow Power Supply/Caja Jagoran Shigarwa eFlow6NB, eFlow102NB, eFlow104NB, da madaidaitan Jagororin Shigar da Ƙarshen Majalisa don ACM4, ACM8, PDS8, VR6 don ƙarin umarnin shigarwa.

Hardware:

T1SAK3F4: Tsarin Modulolin SALTO:

1. Ɗaure masu sarari a kan daidaitawar alkalan ƙarfe (A) na jirgin baya (Fig. 2, shafi 3).
2. Sanya na'urorin SALTO akan masu sarari masu dacewa kuma a dora su ta amfani da sukurori (an samar) (Hoto 2a, shafi 3).
3. Hana jirgin baya zuwa wurin tare da kayan aiki.

Jadawalin Matsayin Mai Gudanarwa don Samfura masu zuwa:

SALTO Access Controller	Pem Dutsen
CU42E0, CU4200 ko CU4EB8	A

T2SAK7F8: Tsarin Modulolin SALTO:

1. Ɗaure masu sarari a kan daidaitawar alkalan ƙarfe (A) na jirgin baya (Fig. 3, shafi 4).
2. Sanya na'urorin SALTO akan masu sarari masu dacewa kuma a dora su ta amfani da sukurori (an samar) (Hoto 3a, shafi 4).
3. Hana jirgin baya zuwa wurin tare da kayan aiki.

Jadawalin Matsayin Mai Gudanarwa don Samfura masu zuwa:

SALTO Access Controller	Pem Dutsen
CU42E0, CU4200 ko CU4EB8	A

T2SAK75F12: Tsarin Modulolin SALTO:

1. Ɗaure masu sarari a kan daidaitawar alkalan ƙarfe (A) na jirgin baya (Fig. 4, shafi 5).
2. Sanya na'urorin SALTO akan masu sarari masu dacewa kuma a dora su ta amfani da sukurori (an samar) (Hoto 4a, shafi 5).
3. Hana jirgin baya zuwa wurin tare da kayan aiki.

Jadawalin Matsayin Mai Gudanarwa don Samfura masu zuwa:

SALTO Access Controller	Pem Dutsen
CU42E0, CU4200 ko CU4EB8	A

Ana iya Sarrafa da Kula da Samar da Wutar Wuta/Caji na eFlow yayin Bayar da Ƙarfin / Bincike daga Ko'ina akan hanyar sadarwa…

LINQ2 - Module Sadarwar Sadarwar Sadarwa
LINQ2 yana ba da damar IP mai nisa zuwa bayanan lokaci na ainihi daga eFlow wutar lantarki / caja don taimakawa ci gaba da tsarin aiki a matakan mafi kyau. Yana sauƙaƙe shigarwa da sauri da sauƙi da saiti, rage girman tsarin lokaci, kuma yana kawar da kiran sabis ɗin da ba dole ba, wanda ke taimakawa rage Jimlar Kudin Mallaka (TCO) - da kuma haifar da sabon tushen Harajin Kuɗi na Watanni (RMR).

Siffofin:

- UL an jera shi a cikin Amurka da Kanada.
- Ikon gida ko nesa har zuwa (2) fitarwar wutar lantarki ta Altronix eFlow guda biyu ta LAN da/ko WAN.
- Saka idanu bincike na lokaci-lokaci: fitowar DC voltage, fitarwa na halin yanzu, AC & matsayi/sabis na baturi, canjin yanayin shigarwa, canjin yanayin fitarwa da zafin naúrar.
- Ikon samun dama da sarrafa mai amfani: Ƙuntata karantawa/rubutu, Ƙuntata masu amfani zuwa takamaiman albarkatu
– Biyu (2) na cibiyar sadarwa mai sarrafa Form “C” Relays.
- Abubuwan shigar da shirye-shirye guda uku (3): Sarrafa relays da samar da wutar lantarki ta hanyoyin kayan masarufi na waje.
- Imel da sanarwar Windows Dashboard
- Abubuwan tarihin abubuwan da suka faru.
- Secure Socket Layer (SSL).
- Shirye-shirye ta hanyar USB ko web mai lilo – ya haɗa da software mai aiki da kebul na USB ƙafa 6.

LINQ2 Yana hawa Ciki da kowane Wurin Lantarki

T1SAK3F4 Girman Rukunin (H x W x D):
18" x 14.5" x 4.625" (457mm x 368mm x 118mm)

T2SAK7F8 da T2SAK75F12 Girman Yadi (H x W x D):
27.25" x 21.75" x 6.5" (692.15mm x 552.5mm x 165.1mm)

Altronix baya da alhakin kowane kuskuren rubutu.
140 58th Street, Brooklyn, New York 11220 USA | waya: 718-567-8181 | fax: 718-567-9056
web site: www.altronix.com | e-mail: info@altronix.com | Garanti na rayuwa
IITrove SALTO Kits J05U

Takardu / Albarkatu

Altronix T2SAK7F8 Trove Access da Haɗin Wuta [pdf] Jagoran Shigarwa T2SAK7F8 Trove Access da Power Integration, T2SAK7F8, Trove Access and Power Integration, Access and Power Integration, Power Integration, Integration

Magana

• Manual mai amfani