Amazon Basic classic kitchen cabinet
UMARNIN SHIGA
SHIGA CABINET. ZABIN HARDWARE WANDA YAFI CANCANCI IRIN BANGO
MUHIMMI: YI AMFANI DA “KAUNAR KWANA” KO “ZAGE KAI” TARE DA WANKA. KUJERAR KUJIRA DA TSAFIYA A KAN TItin BAYA KO PANEL BA TARE DA TUKI CIKIN DOGON BAYAN BA KO KAYAYYA.
KARATU
Amintacce zuwa bango tare da sukurori # 10 x 3 ″ a wurin tudu.
BANGO
Hana ramuka kuma amintacce zuwa bango tare da kusoshi masu juyawa. Lura: Yi amfani da ƙulle-ƙulle kawai lokacin da ba za a iya haɗa ma'ajin hukuma zuwa sandar bango ba. Hakanan dole ne majalisar ministocin ta kasance a haɗe da majalisar da ke kusa kamar yadda aka zayyana a Mataki na 3.
CONCRETE
Hana ¼” ramuka, saka ginshiƙan bango #10 kuma amintaccen bango tare da sukurori # 10 x 3 ″.
SHIGA CABINET – FARA A KASHI
Koyaushe fara a cikin kusurwa inda runfunan kabad biyu za su taru tare. Ana buƙatar cire duk kofofin yayin aikin shigarwa don daidaita duk kabad ɗin tare yadda ya kamata. Gano wuri kuma yi alama a sansannin bango inda za a shigar da kabad ɗin da aka tsara. Sanya majalisar kusurwa a cikin wannan matsayi. Yi amfani da matakin don tabbatar da cewa majalisar ɗin tana da daidaito kuma madaidaiciya. Idan an buƙata, karkatar da majalisar zuwa matakin.
MUHIMMI: Shim cabinets square (lebur) zuwa bango don haka babu rata tsakanin baya na majalisar da bango a wurin hawa. Hana ramin matukin jirgi mai girman 3/16 inci a wuraren ingarma ta bangon baya da cikin ingarma. Dutsen majalisar zuwa bango tare da kayan aikin da ya dace da nau'in bangon ku. Da zarar an shigar da akwatunan kusurwar ku, yi aiki waje don shigar da sauran kabad.
HAKA MAjalissar Zartas TARE
Bayan an kulla katakon kusurwa zuwa bango, yi amfani da C-clamps don daidaita majalisar ministoci ta gaba zuwa majalisar ministoci ta farko. Yi amfani da matakin don tabbatar da kabad ɗin da ke kusa da juna sun yi daidai da juna. Idan ana buƙata, karkatar da kabad ɗin zuwa matakin. Hana ramin matukin jirgi 1/8 inci a cikin firam ɗin fuskar sama ko ƙasa da kowane wurin maƙalar ƙofar. Haɗa minisita ta biyu zuwa majalisar farko ta amfani da dunƙule #8 x 2½” da ƙwanƙwasa don mafi kyawun bayyanar. Koyaushe haɗa kabad tare a firam ɗin fuska kamar yadda aka nuna. Kada a haɗe ta cikin ɓangaren gefen majalisar.
HANKALI:
Dole ne ku haƙa ramukan matukin jirgi don haɗa katako tare.
SHIGA RAGON MAJALISSAR
Hana ramin matukin jirgi mai girman 3/16 inci a wuraren ingarma ta bangon baya da cikin ingarma. Mataki da hawa majalisar zuwa bango tare da dunƙule # 10 x 3 ″. Idan an buƙata, karkatar da majalisar zuwa matakin. KAR KAR KU TSARA GABATAR DA DUMI-DUMINSA HAR SAI AN HADA DUKKAN MAJALISSAR TARE. Bayan an haɗa dukkan kabad ɗin tare kuma suna da daidaito kuma amintacce, sa'an nan kuma ƙara duk skru masu hawa. Kula da wurin zama masu hawa sukurori tam a gaban dogo na baya ko panel ba tare da tuƙi cikin dogo na baya ko kayan panel ba. Bincika don tabbatar da cewa duk kabad ɗin sun kasance daidai bayan ƙarfafawa.
NOTE
Don haɗa katun bango zuwa sashin TALL PNTRY, yi rami mai zurfin 1/8 ″ matukin jirgi 7/8 ″ ta cikin firam ɗin fuskar bangon bango zuwa rukunin kayan abinci mai tsayi. Yi amfani da dunƙule # 8 x 1-5/8 ″ don amintar da katako tare.
GYARAN AZAN KITCHEN
Bayan kun shigar da dukkan akwatunan ku, yana iya zama dole a daidaita gaban aljihunan aljihun tebur don su daidaita kuma su sami bayyananniyar bayyananniyar da ta dace. Don ingantaccen daidaitawa, sassauta sukukuwan da ke riƙe da aljihunan aljihun tebur zuwa firam ɗin majalisar kuma daidaita aljihun tebur, sannan ƙara skru. Hana ramin matukin jirgi 1/8 ″ ta rami na biyu da ke ƙasa kuma ku fitar da dunƙule # 8 x 5/8 ″ don gyara aljihun tebur a wurin.
- Sake dunƙule kuma yi gyare-gyare a tsaye.
- Zazzage 1/8 ″ DIA. matukin jirgi a cikin rami na biyu na dunƙule.
- Matse dunƙule # 8 x 5/8 ″ a cikin ramin don gyara ɗigon ɗigo a wurin.
Ya kamata aljihunan majalisar ministoci da kofofin su yi layi kamar yadda aka nuna a ƙasa. Tabbatar cewa tafiye-tafiyen suna cikin madaidaicin matsayi kafin hako ramukan matukin.
Maganganun ɗaure da aka kwatanta anan shawarwari ne kawai kuma sun dogara ne akan abubuwan da aka saba amfani da su. Kowane mai sakawa dole ne ya kimanta takamaiman halaye na takamaiman bangon da za a shigar da kabad ɗin a kai don tabbatar da an yi amfani da madaidaicin mafita kuma an ɗaure samfurin lafiya da aminci. Wannan na iya buƙatar kayan masarufi ko hanyoyin ɗaure waɗanda suka bambanta da, ko ƙari ga abin da aka bayyana anan. RSI BAYA BAYAR DA SANYA SANYA WANNAN KYAUTA.
RSI Kayan Gida
- 400 E
- Hanyar Orangethorpe
- Anaheim, CA 92801
- Tel: 1-888-578-4009
- www.AmericanClassicsKitchens.com
