ANEX IQ Basic Stroller
IQ DUK-IN-DAYA
Nadawa na firam
IQ FRAME
Buɗe firam
Haɗe ƙafafun gaba
Kulle ƙafafun maɗaukakiyar gaba
Haɗe da ƙafafun baya
Birki
Abun girgiza
Ka'idojin kulawa
Cire haɗin / haɗa kwandon siyayya
Dauke hannu
Daidaita nisa firam
Cire kayan daki
Nadewa daga cikin akwati
Fitar da akwati
Abin da aka makala zuwa firam
Samun iska
Daidaita kaho na Carrycot
Abin da aka makala murfin Carrycot
Tsabtace Carrycot
Abin da aka makala zuwa firam
Abubuwan da aka bayar na IQ SEAT UNIT
Nadawa na firam tare da wurin zama
Daidaita murfin kujera
Daidaita madaidaicin madaidaicin wurin zama
Samun iska na wurin zama na baya
Daidaita kafa
Shingayen tsaro na wurin zama
Ƙaƙƙarfan bel ɗin aminci
Daidaita bel na tsaro
Tsaftace wurin zama
Soft goods haduwa
Daidaita hular buggy
Samun iska na bayan buggy
Gyaran baya na Buggy 
Daidaita kafa
Ƙaƙƙarfan bel ɗin aminci
Daidaita bel na tsaro
Nadawa firam ɗin tare da buggy
Rufin ruwan sama don ɗaki / wurin zama
Bincika don sabbin litattafai akan mu website: anexbaby.com
Bayanin zai iya canzawa ba tare da sanarwa ba. Anex ba zai zama alhakin kurakuran fasaha ko abubuwan da ke ƙunshe a cikin wannan jagorar ba. Samfurin da aka saya zai iya bambanta da samfurin kamar yadda aka bayyana a cikin wannan jagorar.
Farashin AVALEX PTE. LTD.,
8 Titin Eu Tong Sen #17-88, Tsakiya
Hasumiyar ofis 2, Singapore, 059818
+65 62215096
office@anexbaby.com
Takardu / Albarkatu
 | IQ Basic Stroller |
Magana
- Manual mai amfanimanual.tools
Dear Anex Team,
We are experiencing an issue with our Anex IQ stroller and would appreciate your assistance.
We have these height adapters that were previously attached to the frame, and we used them with the bassinet without any problems. After removing the bassinet, we installed the seat unit (stroller seat) without the adapters.
However, the height adapters are now stuck in the seat unit, and we are unable to remove them. We have tried pulling them out, but they do not come off.
Could you please advise how to safely remove these adapters? If possible, we would appreciate it if you could send us instructions or a guide.
We have attached photos for your reference.
Thank you in advance for your help.
Gaisuwan alheri,
Yuliya Tolkishevskaya
We are experiencing an issue with our Anex IQ stroller and would appreciate your assistance.
We have these height adapters that were previously attached to the frame, and we used them with the bassinet without any problems. After removing the bassinet, we installed the seat unit (stroller seat) without the adapters.
However, the height adapters are now stuck in the seat unit, and we are unable to remove them. We have tried pulling them out, but they do not come off.
Could you please advise how to safely remove these adapters? If possible, we would appreciate it if you could send us instructions or a guide.
We have attached photos for your reference.
Thank you in advance for your help.
Gaisuwan alheri,
Yuliya Tolkishevskaya
How do I remove the height adapters from the Anex IQ seat unit if they are stuck?
Removing height adapters from the Anex IQ seat unit typically requires engaging the release mechanism located on the adapters themselves or the seat unit's attachment points. If they are stuck, please try the following steps:
Tsanaki: Do not use excessive force or tools like pliers, as this may damage the plastic locking tabs. If the adapters remain stuck, it is recommended to contact Anex customer support directly at office@anexbaby.com or visit an authorized service center, as there may be a mechanical obstruction or a need for professional lubrication of the locking pins.
Read the full Q&A page