Apps AddressIT Jagorar Mai Amfani

Apps AddressIT App

Bayanin samfur

Ƙayyadaddun bayanai

• Sunan samfur: AddressIT
• Takardar bayanai:11-808-868-01
• Ranar Gyara: 4/24/2024
• Masu Gudanar da Tallafi: OptiFlexTM, OptiCORETM, TruVuTM
• Nau'in Adireshin Tallafi: IPv4
• Matsakaicin Masu Gudanarwa: Babu iyaka

Umarnin Amfani da samfur

Menene AddressIT app?

AddressIT shine aikace-aikacen hannu wanda aka tsara don taimaka muku saita adiresoshin IP don masu sarrafawa da yawa daga wuri ɗaya. Yana goyan bayan OptiFlexTM, OptiCORETM, da TruVuTM masu sarrafawa, yana ba ku damar sarrafa adiresoshin IP da kyau.

Don fitarwa aiki daga SiteBuilder zuwa AddressIT:

1. SHARI'A: Ƙara duk cibiyoyin sadarwa da masu sarrafawa
   a cikin SiteBuilder kuma saka adiresoshin IP kafin fitar da .job file.
2. Fitar da aiki file daga SiteBuilder:
   • Kewaya zuwa File > AddressIT > Fitarwa.
   • Zaɓi masu sarrafawa a cikin Geographic da bishiyoyin hanyar sadarwa kuma danna Ƙara.
   • Bayan ƙara duk masu sarrafawa, danna Export don ajiye adireshin wayar hannu .aikin file.
   • Imel da .aiki file don loda shi cikin AddressIT akan na'urar hannu.

Tambayoyin da ake yawan yi (FAQ)
Tambaya: Shin AddressIT na iya tallafawa adiresoshin IPv6?
A: A'a, AddressIT kawai yana goyan bayan adiresoshin IPv4 a yanzu.

An jera mahimman canje-canje a cikin Tarihin Bita na Takardu a ƙarshen wannan takaddar.
An kiyaye duk haƙƙoƙi. Duk alamun kasuwanci mallakin masu su ne.
Abubuwan da ke cikin wannan jagorar an shirya su don amfani da bayanai kawai kuma ana iya canzawa ba tare da sanarwa ba. Mai ɗauka ba shi da alhakin kowane kuskure ko kuskuren da zai iya bayyana a cikin bayanan da ke cikin wannan jagorar.

Menene AddressIT app?

SHARI'A

• WebCTRL® ko i-Vu® v8.0 ko kuma daga baya
• Direba mai sarrafawa FWEX 107-06-2074 ko kuma daga baya
• iOS (14.0 ko daga baya) ko Android (11.0 ko daga baya) kwamfutar hannu ko waya
• Logic mai sarrafa kansa, Mai ɗauka, ko adaftar sabis na mara waya ta OEMCtrl (bangaren na USB-W)

Ƙarsheview

AddressIT shine aikace-aikacen hannu wanda aka tsara don taimaka muku saita adiresoshin IP don masu sarrafawa da yawa daga wuri ɗaya.
AddressIT app yana goyan bayan OptiFlex™, OptiCORE™, da masu kula da TruVu™, amma adiresoshin IPv4 kawai. Babu iyaka akan adadin masu sarrafawa da zaku iya magancewa.

Tsarin aiki na asali
A cikin AddressIT, ana kiran kowane tsarin masu sarrafawa azaman aiki kuma app ɗin yana adana saitunan kowane tsarin a cikin babban fayil ɗin aiki daban.

1. Gina aiki
   • Dole ne masu kula da aiki su kasance suna da suna da adireshin IP, aƙalla. Kuna iya shigo da wannan bayanin daga SiteBuilder ko shigar da shi da hannu a cikin AddressIT. Idan shigar da hannu, zaka iya ƙara masu sarrafawa da yawa cikin sauƙi a cikin kewayon adireshi.
   • Masu sarrafawa suna da gumaka daban-daban waɗanda ke nuna nisan da kuka ɗauke su ta wannan tsari.
     Sabbin masu sarrafawa sun nuna Babu serial number.
2. Haɗa masu sarrafawa a cikin AddressIT tare da masu sarrafa jiki AddressIT yana amfani da lambar serial na kowane mai sarrafawa don nemo shi akan hanyar sadarwa. Kuna tattara jerin lambobin ta hanyar bincika lambar QR. Bayan dubawa, mai sarrafawa yana nunawa An duba serial number.
   Da zarar kun gama wannan tsari, zaku iya:
   • Yi imel ɗin bayanin don shigo da shi cikin SiteBuilder don amfani daga baya
   • Yi imel ɗin bayanin zuwa ga mai fasaha wanda zai saita adiresoshin
   • Ci gaba zuwa mataki na gaba kuma saita adiresoshin da kanku
3. Saita adireshin a cikin masu sarrafawa akan hanyar sadarwa
   Bayan bincika masu sarrafawa, zaku iya sadarwa tare da AddressIT ta amfani da adaftar sabis ɗin mara waya (bangaren # USB-W) akan mai sarrafawa guda ɗaya. Wannan yana ba ku damar saita adireshin duk masu sarrafawa, wanda sannan ya nuna  Saitin adireshin.

Aiki tare da aiki files

Don fitarwa aiki daga SiteBuilder zuwa AddressIT

PREREQUISITE Dole ne ku ƙara duk cibiyoyin sadarwa da masu sarrafawa a cikin SiteBuilder kuma saka adiresoshin IP kafin fitar da .job. file.

Fitar da aiki file daga SiteBuilder

1. Kewaya zuwa File > AddressIT > Fitarwa.
2. Zaɓi masu sarrafawa a cikin Geographic da bishiyoyin hanyar sadarwa kuma danna Ƙara.
   NOTE Zaka iya zaɓar yanki ko kayan aiki kuma an haɗa duk masu kula da ke ƙarƙashinsa.
3. Bayan an ƙara duk masu sarrafawa, danna Fitarwa don adana adireshin wayar hannu .aiki file.
4. Imel da .aiki file don loda shi cikin AddressIT akan na'urar hannu.

Don loda ko ƙirƙirar aiki da hannu

Don loda wani aiki file

1. Matsa ADD.
2. Matsa Browse don zaɓar aikin file.

Matsa Ajiye.
Don ƙirƙirar aiki da hannu

1. Matsa ADD kuma shigar da suna.
2. Matsa Ajiye. An jera sabon aikin akan allon Ayyuka.
   Don imel da shigo da aiki zuwa SiteBuilder daga AddressIT

Bayan yin canje-canje, kamar haɗa mai sarrafawa zuwa hanyar sadarwa ko saita adiresoshin IP, zaku iya imel ɗin .job da aka sabunta. file don shigo da baya cikin SiteBuilder.

Imel a .aiki file daga AddressIT

1. Latsa ka riƙe aiki.
2. Matsa imel kuma bi tsokaci.

Shigo da aiki cikin SiteBuilder

1. Kewaya zuwa File > AddressIT > Shigo.
2. Zaɓin file kana so ka shigo da kaya.
   NOTE Matakai masu zuwa na iya bayyana daban-daban, dangane da .aiki file. Matakan da ba su da amfani ba su bayyana a cikin mayen ba.
3. Zaɓi masu sarrafawa da aka yiwa alama don sharewa kuma danna Gaba.
4.  Zaɓi cibiyoyin sadarwa don ƙara masu sarrafawa zuwa.
   NOTE Kuna iya view masu sarrafawa azaman LIST ko BIshiya a gefen hagu na mayen. Bishiyar tana nuna inda aka ƙara masu sarrafawa a cikin AddressIT. Tun da AddressIT ba shi da bayanin cibiyar sadarwa, kuna buƙatar ƙara masu sarrafawa a ƙarƙashin cibiyoyin sadarwa don SiteBuilder ya saka masu sarrafawa a cikin bishiyar hanyar sadarwa.
   • Zaɓi mai sarrafawa a gefen hagu da cibiyar sadarwa mai alaƙa a gefen dama.
   • Danna Ƙara.
   • Danna Next idan an gama.
5. Zaɓi gyare-gyaren masu sarrafawa a cikin .aikin file kana so ka shigo da kaya. Idan ana buƙata, duba Adireshin Shigo da Shigo da Sunaye.
   NOTE Serial lambobin ana shigo da su koyaushe. Idan shigo da kaya ya gano bambanci a adireshin mai sarrafawa, adireshin saƙon da aka canza yana bayyana kusa da sunan mai sarrafawa.
6. Danna Next kuma bi tsokaci har zuwa file ana shigo da shi.

Don ƙara ko cire masu sarrafawa
Ƙara wurare ko masu sarrafawa

1. Zaɓi aikin.
2. Matsa ADD.
3. Zaɓi Sabon Wuri ko Sabuwar Na'ura(s).
4. Cika suna mai siffatawa da duk sauran filayen.
   NOTE Idan lambar da aka shigar a cikin Adadin na'urorin ta fi 1 girma, masu sarrafawa za a ƙidaya ta atomatik. Idan filin Suna ya ƙare a lamba, masu sarrafawa masu nasara za a ƙidaya ta atomatik dangane da wannan lambar.
5. Matsa Ajiye.
6. Don ƙara ƙarin wurare ko masu sarrafawa, matsa ADD kuma maimaita matakai 1-6.

Don sharewa ko mayar da aiki
Share aiki, yanki, ko mai sarrafawa

1. Latsa ka riƙe a kan aiki, yanki, ko mai sarrafawa da kake son sharewa.
   NOTE Ba za ku iya share yankin da kuka ƙirƙira a cikin SiteBuilder ba.
2. Matsa share, sannan Ok.

Maida ayyukan da aka goge

1. A kan allon Ayyuka, matsa SAKE. Ko, matsa kuma zaɓi Mayar da ayyuka.
2. Bincika aikin(s) da kuke son mayarwa. Ko, don mayar da duk ayyukan, duba Zaɓi duk.
3. Matsa SAKEWA.

Kewaya tsarin

Yankuna da masu sarrafawa
Lokacin da kuka zaɓi aiki, ƙirar AddressIT yana nuna manyan wuraren matakin ko masu sarrafawa a cikin aikin. Kuna iya zaɓar yanki don nuna 'ya'yansa. Ta hanyar tsoho, ana jera abubuwa a cikin bishiya mai matsayi view. Hakanan zaka iya nuna abubuwa a cikin lebur LIST ta dannawa . Taɓa don komawa ga BIshiyar.
Don nemo yanki ko mai sarrafawa da suna, matsa

Zaɓuɓɓukan menu
Taɓa. Koma zuwa shafin gida ta latsa X a saman kusurwar dama.

 

Don fahimtar jihohin masu sarrafawa
Alamar hagu na kowane mai sarrafawa yana nuna ɗaya daga cikin jihohi masu zuwa.

NOTE Dole ne a buɗe mai sarrafawa don saukewa. Duba Don buɗe mai sarrafawa (shafi na 8).

Don duba serial number
Lokacin da farko viewTare da allon bayanan mai sarrafawa a cikin AddressIT, lambar Serial da filayen nau'in samfur babu kowa. Ana duba lambar QR mai sarrafawa tana cika waɗannan filayen ta atomatik.

1. Zaɓi aiki daga allon Ayyuka.
2. Zaɓi mai sarrafawa wanda ke buƙatar yin magana.
   don kunna tsakanin BISHIYA da LIST views
3. Matsa SCAN CODE.
4. Bincika lambar QR na mai sarrafa jiki tare da na'urar tafi da gidanka.
5. don kunna walƙiya.

Idan ka duba lambar QR daga wani mai sarrafa daban ta hanyar haɗari, zaka iya gyara ko cire lambar serial da hannu. Duba Don shirya bayanan mai sarrafawa (shafi na 6).
NOTE Idan an dawo da nau'in samfurin daga .aiki file ya bambanta da na lambar QR, saƙon rashin daidaiton samfur ya bayyana. Idan kana son sake rubuta nau'in samfurin da aka dawo da shi daga .aiki file tare da nau'in samfurin da aka bincika, matsa Ok.

Don gyara bayanan mai sarrafawa

1. Zaɓi mai sarrafawa daga allon Ayyuka.
2. Taɓa don gyara sunan mai sarrafa da bayanin bayani.
3. Da zarar ka gama gyara, matsa Ajiye.
   Filayen NOTE suna da hankali.

Masu kula da magana

Idan kana so ka tabbatar da wurin da mai sarrafawa yake a zahiri, zaka iya yin hakan ta hanyar sa LED ɗinsa ya lumshe ido.
A cikin AddressIT, zaɓi mai sarrafawa kuma matsa BLINK LED. Sys da Net LEDs suna kyaftawa fari, sau ɗaya a cikin daƙiƙa 10, sannan tsayawa.

Don haɗi zuwa cibiyar sadarwa

1. Saka adaftar sabis mara waya (bangare# USB-W) cikin tashar sabis na USB na mai sarrafawa don sadarwa tare da na'urar hannu. Ana kiran wannan mai sarrafawa a matsayin "mai haɗawa mai sarrafawa".
   Tsanaki Idan tashar tashar Eth1 tana aiki, haɗa kebul Nau'in-A Namiji zuwa Namiji na USB zuwa tashar tashar USB da adaftar sabis mara waya.
2. A cikin AddressIT, matsa CONNECT sannan Ok.
   NOTE Dole ne na'urar hannu da ke aiki da AddressIT ta goyi bayan band ɗin 5 GHz.
3. Zaɓi cibiyar sadarwar mara waya ta amfani da SSID cibiyar sadarwa da kalmar wucewa waɗanda aka buga akan adaftar sabis ɗin mara waya.
   NOTE Lokacin haɗawa da na'urar tafi da gidanka da farko, zaka iya ganin saƙon da ke nuna babu intanet ko babu shi. Wannan ba shi da kyau kuma kuna iya ci gaba.
4. Bayan an haɗa haɗin, maɓallin CONNECT ya zama shuɗi. Kuna iya amfani da AddressIT don saita adiresoshin masu sarrafawa.

Don saita adireshin
AddressIT na iya saita adireshin IP na mai sarrafawa ɗaya ko ƙungiyar masu sarrafawa ƙarƙashin wurin bishiyar da kuka zaɓa.

1. Matsa SET ADDRESS a hannun dama na rukunin ƙasa.
   BAYANI
   • Idan an saita adireshin cikin nasara, masu sarrafawa suna nunawa Saitin adireshin.
   • Idan adireshin IP ɗin ya riga ya wanzu, za ku ga saƙon da bai dace da adireshin ba da buƙatar sake rubutawa. Buƙatar sake rubutawa yana faruwa ne kawai a matakin mai sarrafawa.
2. Taɓa Ok.

Shirya matsala
A allon bayanan mai sarrafawa, saƙonnin kuskure masu zuwa suna bayyana lokacin da mai sarrafawa da AddressIT suna da adiresoshin IP daban-daban:

• Rashin daidaita adireshin IP
• subnet mask address rashin daidaituwa
• rashin daidaituwa adreshin ƙofa
• Mai sarrafawa yana nuna Kuskure.
• NOTE Duk wani haɗin jihohin kuskure da saƙonni yana yiwuwa.

Don buše mai sarrafawa

Mai sarrafawa wanda sabo ne daga masana'anta ko kuma ba'a saita shi a baya tare da adireshin IP ba, koyaushe ana iya daidaita shi ta amfani da AddressIT ko Kanfigareshan hanyar sadarwa na gida a cikin WebCTRL® ko i-Vu® aikace-aikace. Koyaya, da zarar kun sanya adireshin IP mai inganci, kuna da har zuwa awanni 24 don yin wasu canje-canje. Bayan sa'o'i 24, ana kulle mai sarrafawa kuma ba za'a iya gyarawa ba.
Da zarar kun yi aikinku file, AddressIT yana buƙatar sadarwa tare da mai sarrafawa mara buɗewa. Kuna iya buše OptiFlex™, OptiCORE™, da TruVu™ masu sarrafa ko dai daga cikin WebCTRL® ko i-Vu® dubawa ko ta latsa maɓallin DSC dake kan mai sarrafawa. Dole ne a kunna mai sarrafawa.

Don buše daga WebCTRL® dubawa

1. Fadada Direban mai sarrafawa a cikinItacen hanyar sadarwa kuma zaɓi Na'ura.
2. A kan Properties tab, gano wuri Kanfigareshan hanyar sadarwa na gida.
3. Bincika Bada Kanfigareshan hanyar sadarwa na gida daga wasu na'urori akan hanyar sadarwar gida na tsawon awanni 24.
4. Danna Karɓa.

Don buše daga i-Vu® dubawa

1. A cikin bishiyar kewayawa, danna-dama mai sarrafawa kuma zaɓi Abubuwan Direba > Na'ura.
2. A kan Saituna shafin, gano wuri wurin Kanfigareshan hanyar sadarwa na gida.
3. Bincika Bada Kanfigareshan hanyar sadarwa na gida daga wasu na'urori akan hanyar sadarwar gida na tsawon awanni 24.
4. Danna Karɓa.

Don buɗewa ta amfani da maɓallin DSC
Danna maɓallin DSC akan OptiFlex™, OptiCORE™, ko TruVu™ mai sarrafa bayan Sys da Net LED fitilu sun juya kore.
NOTE Idan ka danna maɓallin DSC lokacin yin booting sama, mai sarrafawa ba zai buɗe ba.

Tarihin sake fasalin daftarin aiki

Ana jera mahimman canje-canje ga wannan takaddar a ƙasa. Ƙananan canje-canje kamar kurakuran rubutu ko tsarawa ba a jera su ba.

Don amfanin ciki kawai

Duk alamun kasuwanci da aka yi amfani da su a nan mallakin masu su ne. Mallaka da Sirri