Home › APPs › Apps Magic Lantern APP User Manual

Manual mai amfani na Magic Lantern Apps

Apps Magic Lantern APP

Ƙarsheview

The Magic Lantern app ne na hannu wanda ke sarrafa LED lamp bel ta apple ko Android wayar hannu.
Hanyoyin sarrafawa na gargajiya kamar infrared, 433MHz, 2.4GHz da sauran tsoffin hanyoyin waya za a maye gurbinsu da hanyar sarrafa wayar hannu tare da dacewa, ƙarfi da fasaloli masu ƙima.
Ta hanyar wayar hannu, zaku iya sarrafa launi, haske da zafin launi cikin sauƙi da sauri na bel ɗin hasken LED. Hakanan zaka iya saita yanayin walƙiya iri-iri, kuma sanya bel ɗin hasken LED ya motsa tare da kari na kiɗa.
Kawai ci gaba da kunna band ɗin hasken LED, kunna wayar hannu Magic Lotus lamp aikace-aikacen software na sarrafa hankali, haɗa ɗaya ko fiye masu sarrafa hasken wuta na LED ta hanyar Bluetooth, don gane saitunan daban-daban
iko da mahara LED haske makada. Aiki mai sauqi qwarai, mai sauƙin koya da amfani.

Siffofin

Daidaita igiyoyin LED masu launi tare da launuka 60,000 don canza launi da haske da daidaita matakan LED monochrome don canza haske da zafin launi Kunna kiɗan wayar hannu ko kunna na'urar sake kunna sauti, zaku iya barin haske ya canza launi da haske tare da yanayin kiɗan, rhythm na kiɗa yana da kyau A cikin yanayin saiti da yawa don canza launi da sarrafa igiyoyin LED ba tare da wayar hannu ba

Ikon nesa mai nisa tare da eriya ta gaba ɗaya, da yawancin-zuwa-yawan yanayin sarrafa rukuni
Haɗin atomatik mai sauri da sauƙi

Ayyuka
Magic Lantern APP yana da sauƙin amfani da dacewa. Ainihin gwaji da tabbatar da ɗaruruwan wayoyin hannu sun dace da kasuwa na yanzu.
Yawancin wayoyi. APP karami ne kuma mai dacewa, yana cinye ƙasa da albarkatun tsarin, don haka buƙatun ƙirar wayar hannu suna da ƙasa. Jinkirin sarrafawa karami ne, aikin yana jin daɗi, sarrafa haske yana santsi tare da ma'anar gani na mutane.

Yanayin Aiki

Wannan shirin na APP yana buƙatar wayoyin tsarin sama da Andriod 4.3 da iOS 8.0 Tsarin wayar hannu bai iyakance ba.

Umarni

Note: Android version da iOS version download kuma amfani da wannan hanya, a nan a cikin Android version a matsayin tsohonample.

Zazzagewar APP

Duba lambar QR

Tsarin iOS da Android na iya zazzage APP ɗin "Lantern Magic" ta hanyar bincika lambar QR. Bude mai binciken ko wasu kayan aikin tare da aikin "Scan QR code", duba lambar QR "Lantern Magic" kamar yadda ke ƙasa:
Bayan an shigar da software kuma an zazzage shi cikin nasara, danna apk don shigarwa.Bayan an gama shigarwa, wannan salon alamar shirin zai bayyana akan tebur.

Aiki na Aiki

Danna gunkin Magic Lantern APP, shigar da shafin APP:
Bayan shigar da mu'amalar APP, idan ba a kunna Bluetooth ba, "Bada Magic Lantem zuwa Bluetooth?" Danna [Ba da izini]
canza zuwa launi da haɗin haske:
danna don nuna lamp lissafin, view lamp jeri:
Danna zuwa RGB daidaitawar hannu view:
canza zuwa yanayin dubawa:
canza zuwa yanayin rhythm na kiɗa:
Canja zuwa mahaɗar sautin makirufo:
Canja zuwa keɓancewar lokaci:
Canja zuwa wurin gyara jerin layin fil:

BAYANIN FCC

Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
NOTE: An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

Sake daidaitawa ko matsar da eriya mai karɓa.
Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Gargaɗi: canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aikin.

Takardu / Albarkatu

	Magic Lantern APP User Manual · SNT-FS-12-01, SNTFS1201, 2A6NA-SNT-FS-12-01, 2A6NASNTFS1201, Magic Lantern APP, APP
	App na Magic Lantern User Guide · 4FT, 2A8BS-4FT, 2A8BS4FT, Magic Lantern, App, Magic Lantern App
	App na Magic Lantern User Manual · 2A9BQ-D50, 2A9BQD50, d50, Magic Lantern, App, Magic Lantern App
	Magic Lantern APP Instruction Manual · Magic Lantern APP, Lantern APP, APP
	App na Magic Lantern User Guide · Magic Lantern App, App

Magana

Manual mai amfanimanual.tools

Published: April 30, 2022

Tambayoyi da amsoshi

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Tambayoyi & Amsoshi

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Daniela Moisii ya ce:

Satumba 16, 2022 a 6: 26 pm
Hello, I just bought the lamp in the double pack, I started it and tried a few colour combination. I left it then on white ( by the way, it’s quite pale, you can’t read with it), it worked a while, now it only blinks , no matter what I do, even if it’s disconnected from the power. What to do ?
Daniela Moisii asks Hello, I just bought the lamp in the double pack, I started it and tried a few colour combination. I left it then on white ( by the way, it's quite pale, you can't read with it), it worked a while, now it only blinks , no matter what I do, even if it's disconnected from the power. What to do ?

Manuals+ clarified question

Tambaya

Why is my Magic Lantern lamp blinking and how can I fix it?
Amsa

Based on the Magic Lantern APP manual and common troubleshooting for these LED controllers, here are the steps to address the blinking issue:

Check the Mode: Lamp may have been set to a "Flash" or "Jump" mode within the app. Open the Magic Lantern app, go to the Salo or Yanayin interface (as shown in section 3.2, step 6), and select a static color or "Auto Play" to see if the blinking stops.

Zagayowar Wuta: Since you mentioned it blinks even when disconnected, it is likely that residual power in the capacitors or the controller's memory is maintaining the last state. Unplug the lamp from the power source for at least 30 seconds before plugging it back in.

Duba Haɗin: Ensure the LED strip is securely connected to the controller. A loose connection can sometimes cause flickering or blinking.

App Reset: Open the app, go to the Lamp Jerin (section 3.2, step 4), and ensure the device is properly connected via Bluetooth. You can try deleting the device from the list and letting the app auto-search to reconnect it.

Haske da Launi: You noted the white light is pale; this is common for RGB strips that create white by mixing colors. In the Daidaita interface, ensure the brightness slider is set to maximum.

Idan lamp continues to blink rapidly while disconnected from power, there may be a hardware defect in the controller or power adapter of your specific double pack unit.
Read the full Q&A page
Amsa
Ba a sani ba ya ce:

Oktoba 23, 2022 a 2: 15 pm
magic lantern not appear my blotooth .how can i do?
Anonymous asks magic lantern not appear my blotooth .how can i do?

Manuals+ clarified question

Tambaya

Why is the Magic Lantern device not appearing in my Bluetooth list?
Amsa

If your Magic Lantern device is not appearing in your Bluetooth list, please follow these troubleshooting steps based on the user manual:

Enable App Permissions: When you first open the Magic Lantern app, it will ask "Allow Magic Lantern to Bluetooth?". You must click [Ba da izini] for the app to function and find your devices.

Duba Power: Ensure the LED light band is powered on. The app requires the controller to be active to establish a connection.

Use the App's Search: Instead of looking in your phone's system Bluetooth settings, open the Magic Lantern app and click the lamp ikon lissafin (usually three horizontal lines or a list icon in the top left). The app is designed to perform a "Bluetooth auto connect after search for devices" within its own interface.

Abubuwan Bukatun Tsari: Verify your phone meets the minimum requirements: Android 4.3 or higher, or iOS 8.0 or higher.

Kusanci: Ensure you are within range of the controller's antenna for the initial pairing.
Read the full Q&A page
Amsa
Richard ya ce:

Nuwamba 9, 2022 a 12:21 na safe
Why no RWB combinations? C’mon man!
Richard asks Why no RWB combinations? C'mon man!

Manuals+ clarified question

Tambaya

Why are there no Red-White-Blue (RWB) color combinations available in the Magic Lantern app?
Amsa

The Magic Lantern app provides several ways to customize colors if a specific preset like RWB is not immediately visible in the standard list. Based on the manual, you can try the following to achieve your desired combination:

Modify Pin Sequence: Go to the "Modify Pin Sequence" interface (Step 10 in the manual). This allows you to manually set and reorder the Ja, Kore, kuma Blue light outputs.

Manual RGB Adjustment: Use the "RGB manual adjustment view" (Step 5) to precisely input color values. While the app supports 60,000 colors, specific multi-color patterns are often found under the Salo or Yanayin dubawa.

Pattern Classification: In the Mode interface (Step 6), you can slide up and down through various categories like "Basic," "Curtain," and "Trans" to find multi-color flashing sequences.

If a dedicated RWB "patriotic" mode is missing from the preset list, it may be a limitation of the current software version, but you can often simulate it using the manual RGB settings or by cycling through the available multi-color jump/flash modes.
Read the full Q&A page
Amsa
William Cahill ya ce:

3 ga Yuli, 2023 a 12:03 na safe
is there anyway to get the lights to flash red white and blue
William Cahill asks is there anyway to get the lights to flash red white and blue

Manuals+ clarified question

Tambaya

How can I set the lights to flash red, white, and blue using the Magic Lantern app?
Amsa

To set specific flashing patterns in the Magic Lantern app, follow these steps:

Open the Mode Interface: Taɓa da Salo icon (represented by a grid or four-square icon) at the bottom of the app screen.

Select a Pattern: A cikin Salo menu, you can slide up and down through the list of pre-programmed modes. Look for modes labeled with "RGB" or "7-Color" such as "7-Color Jump" or "7-Color Gradient."

Gyaran Hannu: If a specific red, white, and blue preset is not listed, you can use the Daidaita tab to manually select colors. However, the app primarily uses pre-defined patterns for flashing sequences.

Sarrafa Gudu: Once you select a flashing mode, use the Gudu slider at the bottom of the interface to adjust how fast the colors change.

If your light set came with the Bayani na LED2022-24 remote control, you can also try pressing the FLASH or KARFE buttons to cycle through preset color sequences, though the app provides more granular control over the 60,000 available colors.
Read the full Q&A page
Amsa
Andrew Lapiska ya ce:

Afrilu 17, 2024 a 3: 38 pm
I broke my remote for my magic lantern lite device I have the magic lantern app on my tablet can I use it to turn the lite on and off
Andrew Lapiska asks I broke my remote for my magic lantern lite device I have the magic lantern app on my tablet can I use it to turn the lite on and off

Manuals+ clarified question

Tambaya

Can I use the Magic Lantern app to turn my Magic Lantern Lite device on and off if my remote is broken?
Amsa

Ee, zaku iya amfani da Magic Lantern app on your tablet to turn your device on and off. The app is designed specifically to replace traditional control methods like infrared remotes.

To control your device using the app, follow these steps:

Zazzagewa kuma Sanya: Ensure you have the "Magic Lantern" app installed on your tablet (available for Android 4.3+ and iOS 8.0+).

Kunna Bluetooth: Open the app and click [Ba da izini] when prompted to enable Bluetooth.

Haɗa: Keep your light device powered on. The app should automatically search for and connect to your LED controller via Bluetooth. You can view the connection status by clicking the Lamp Jerin icon (the list icon in the top left).

Ikon Wuta: Da zarar an haɗa, je zuwa Color and Brightness interface. You will find a Lamp canza button (a toggle switch icon) in the top right corner of the screen. Tapping this will turn your light on or off.

Additionally, the app allows you to set Lokaci schedules to automatically turn the lights on or off at specific times, which can be found in the "Schedule" tab at the bottom of the interface.
Read the full Q&A page
Amsa