Argon DAYA V3 Case Don Rasberi

ARGON DAYA V3 / M.2 NVMe PCIE PARTS

1. Magnetic Cire
2. Babban Rufin
3. 40 Pin GPIO Access
4. Fitar iska
5. 3.5mm Audio Port (Aiki kawai tare da Argon
6. USB-C Power In
7. 2xTypeAHDMI
8. Maɓallin Wuta
9. Gigabit Ethernet 02xUSB3.0
10. 2 xUSB2.0
11. ID na Pele Film Strip
12. PC da Socket
13. Power Pogo fil
14.  THRML M.2H Abincin Abinci 49
15. M.2 NVMe Drive Socket

SIFFOFIN ARGON DAYA V3

ARGON DAYA V3 KARA A kan Modules

BAYANIN MAJALISAR

1. Haɗa Rasberi Pi® 5 zuwa HDMI-Power Board. Sanya
   Silicon Sannan Pads akan Argon DAYA V3 heatsinks (CPU da PMIC).
   Raspberry Pi 5 tare da HDMI-Power BOARD ba zai yi ƙarfi ba idan ba a haɗe shi da babban shari'ar ba.
2.  Zaɓi Yanayin Gudanar da Maɓallin Wutar Argon DAYA V3:
   ARGON DAYA V3 / M.2 NVMe PCle CASE JUMPER PIN SETTING
   
3. Haɗa PCle Pipe Flat Flex Cable zuwa tashar Rasberi Pi® 5 PCIE.
4. Haɗa Argon BLSTR DAC Board zuwa fil na Argon DAYA V3 RP2040-Fan Board.
   Ana buƙatar Argon BLSTR DAC don kunna tashar sauti na 3.5mm.
5. A hankali haɗa Rasberi Pi9 5 HDMI-Power taro zuwa mace GPIO da 6-pln Power tashar jiragen ruwa na Argon ONE V3 case.
6.  Amintaccen lebur ɗin kai don ɗaure Rasberi Pi'” 5 da taron Hukumar Wuta ta HDMI zuwa babban harka.
   
7. A ɗaure murfin ƙasa na Argon DAYA V3 / M.2 NVMe PCle ta amfani da sukurori na zagaye.
8. Haɗa Drive ɗin M.2 NVMe ɗin ku zuwa Argon DAYA V3 M.2 NVMe PCIe Expansion Board. Wannan Hukumar za ta karɓi M.2 Key M da M.2 Key B+M NVMe Driver Storage.
   Wannan Hukumar baya jituwa da M.2 SATA Storage Drives.
   Kuna iya matsar da madaidaicin dunƙule a kan allo zuwa girman da ya dace na Driver ɗin ku.
   DANNA Maballin WUTA sai a Kunna bayan haɗawa da haɗa Wutar Lantarki

SHIGA ARGON DAYA V3 BUTTON WUTA DA RUBUTUN IRIN FAN

1. Mataki 1: Sanya Saitin EE PROM don haɓaka ƙarfi da taya daga NVMe.
   1. Haɗa zuwa Intanet, tabbatar da an sabunta Rasberi Pi TI ni kuma aiwatar da shi a cikin Tashar.
   2. Sake yi.
2. Mataki na 2: Shigar da Rubutun Sarrafa Argon da Saitunan Config.txt 1. Haɗa zuwa Intanet kuma aiwatar a cikin Terminal.
   

Sake yi.
RASHIN SHIGA
Don cire rubutun Argon DAYA V3 kuna iya yin haka ta danna alamar Desktop ɗin Argon DAYA V3. Hakanan kuna iya cire rubutun ta Tenninal Shell ta buga:

Koyaushe sake yi bayan canza kowane tsari ko cirewa don saitunan da aka bita suyi tasiri.

Saitunan atomatik A cikin Argon DAYA V3 SCRIPT

Rubutun ARGON DAYA yana sarrafa shigar da duk ɗakunan karatu, shirye-shirye da EEPROM da saitunan Config waɗanda ake buƙata don RP2040 a cikin Argon DAYA V3 Case don samun damar sadarwa tare da Raspbenry Pl 5 kuma yayi ayyuka daban-daban kamar Active Cooling da Power Management.
A ƙasa akwai SETTINGS waɗanda Rubutun Argon DAYA ya sarrafa su.

TSOHON ARGON DAYA V3 BUTTON WUTA DA SIFFOFIN FAN

Bayan shigar da rubutun Argon DAYA V3 ta tsohuwa, saitin maɓallin wuta na Argon DAYA V3 da tsarin sanyaya sune kamar haka:

Koyaya, zaku iya canza ko saita FAN zuwa saitunan da kuke so ta danna alamar Desktop ɗin Argon DAYA V3.

Ko ta hanyar Teminal Shell ta hanyar bugawa da bin ƙayyadadden tsari: 

argon-config

SANTA ARGON BLSTR DAC DOMIN RASPBERRY Pl OS

1. Tabbatar cewa kun shigar da Rubutun Kanfigareshan Argon a cikin ku ta hanyar aiki a cikin Terminal Shell:
   
2. Don shigar da Kayan aikin Kanfigareshan Argon rubuta argon-config a cikin Terminal Shell. Shigar da lamba 3 don shigar da Kanfigareshan Argon BLSTR DAC.  
3. Da zarar an shigar za ku iya ganin wannan.
4. 11 kuna son saita ARGON BLSTR DAC da hannu kawai ƙara saitin a cikin saitin file yana a /boot/flnnware/config.txt
   
5. Sannan Sake yi.

Don ƙarin bayani ziyarci: https://largon40.com/blogs/argon-resources

SAITA MAI KARBAR INFRARED MAI GINI
Sabuwar sigar tana da mai karɓar Mai karɓar Infrared mai shirye-shirye wanda zai iya kunnawa da KASHE na'urar ta amfani da Argon 40 IR Remote.

Don saita siginar mai karɓar Infrared ON/KASHE na nau'in Argon ONE V3 a cikin Terminal Shell:
argonone-ir
Sannan bi umarnin kamar yadda aka nuna.

SHAWARWARI NA NAN NESA & WUTA
Argon JR Remote  https://ljargon40.com/products/argon-remote
Argon PWR GaN 27W Isar da Wuta  https://ljargon40.com/products/argon-pwr-gan-usb-Pd·POWer-supply-27-watts

ARGON DAYA V3 BASIC HARDWARE TEST

1. Haɗa soket ɗin USB-C na ciki akan RP2040-Fan Board zuwa Samar da Wuta na 5V.
2. Danna Maɓallin Ƙarfin Ƙarƙashin Ƙarƙashin Ƙira.
   
3. Wannan zai fara FAN na ciki don GUDU 5 SECONDS sannan ya TSAYA.
4. Wannan zai nuna cewa RP2040 yana iya sadarwa da kyau tare da Maɓallin Wuta da FAN na ciki kuma hukumar tana da cikakken aiki.

KYAUTA ARGON DAYA V3 FIRMWARE

1. Zazzage a cikin PC ko Rasberi Pi Kwamfuta sabuwar Argon DAYA V3 Firmware daga hanyar haɗin da ke ƙasa: https://download.argon40.com/firmware/ArgonOne.uf2
2. LATSA sannan ka rik'e BUTTIN WUTA na Argon DAYA V3 yayin da kake haɗa USB na ciki •C tare da kebul na Data zuwa PC ko Raspberry Pl kwamfuta.
3. Wannan yana sanya RP2040 cikin yanayin na'urar ma'ajiya ta USB.
   
4. Sannan zaku iya JANYO da DUBI KARSHEN .uf2 flnnware ɗinku file zuwa na'urar ajiya mai yawa na USB.
5. Fitar da na'urar idan an gama.

www.argon40.com 

Takardu / Albarkatu

Argon DAYA V3 Case Don Rasberi [pdf] Jagorar mai amfani V3, PI 5, DAYA V3 Case Don Rasberi, DAYA V3, Case Don Rasberi, Rasberi

Magana

• Manual mai amfani