Dickson TM320 Temperature and Humidity Data Logger

1. Gabatarwa

The Dickson TM320 is a versatile data logger designed to accurately monitor and record temperature and humidity levels. Featuring a large display for real-time readings, audio/visual alarms, and convenient data transfer options via USB and flash card, it provides essential environmental monitoring for various applications. Its user-friendly design ensures ease of use and reliable performance.

• USB Enabled Download: Easily transfer recorded data to a computer.
• Flash Memory Data Transfer Capability: Utilize flash cards for convenient data retrieval.
• Jumbo Display: Clear and easy-to-read real-time measurements.
• Sauƙin Amfani: Intuitive interface for straightforward operation.

2. Bayanin Tsaro

Please read all safety instructions before operating the device. Failure to do so may result in damage to the device or personal injury.

• Do not expose the device to extreme temperatures outside its specified operating range.
• Avoid direct contact with water or high humidity environments beyond the non-condensing range.
• Yi amfani da takamaiman hanyoyin samar da wutar lantarki da kayan haɗi kawai.
• Kada kayi ƙoƙarin buɗe ko gyara na'urar da kanka. Koma duk hidima ga ƙwararrun ma'aikata.
• A kiyaye nesa da yara.

3. Abubuwan Kunshin

Tabbatar cewa duk abubuwa suna nan a cikin kunshin:

• Dickson TM320 Data Logger
• Manual Umarni (wannan takarda)
• USB Cable (may be sold separately)
• SD Card (may be sold separately)
• Batteries (may be pre-installed or included)

4. Samfurin Ya Ƙareview

Hoto 4.1: Gaba View. Shows the large digital display, 'DICKSON' branding, and three control buttons: MIN/MAX, ALARM, and SAVE.

Hoto 4.2: Gefe View tare da Ports. Illustrates the mini-USB port for data transfer and external sensor input jacks, along with ventilation for internal sensors.

Hoto na 4.3: Baya View. Displays the battery compartment cover and keyhole slots for wall mounting.

Hoto 4.4: Sama View. Shows the slot for inserting an SD card for data storage and transfer.

5. Saita

5.1. Shigar da Baturi

1. Nemo ɗakin batirin a bayan na'urar (duba Hoto na 4.3).
2. Zamar da murfin baturin bude.
3. Insert the required batteries (typically AA or AAA, check compartment for type) ensuring correct polarity (+/-).
4. Rufe murfin baturin amintacce.

5.2. Kunna Wutar Farko

The device should power on automatically once batteries are installed. The display will illuminate, showing current readings or a startup sequence.

5.3. Hawan Na'urar

The TM320 can be placed on a flat surface or mounted on a wall:

• Wurin Wuta: Ensure the device is placed on a stable, level surface away from direct heat sources or extreme drafts.
• Hawan bango: Use appropriate screws (not included) with the keyhole slots on the back of the device (refer to Figure 4.3) to secure it to a wall. Ensure it is mounted in a location representative of the environment you wish to monitor.

6. Aiki

6.1. Understanding the Display

The jumbo display provides real-time information:

• Karatun Yanzu: Shows the live temperature or humidity value.
• Raka'a: Indicates Fahrenheit (F) or Celsius (C) for temperature, and %RH for humidity.
• Alamar baturi: Nuna sauran rayuwar baturi.
• CH (Tashar): Indicates which channel is currently displayed (e.g., CH 1 for temperature, CH 2 for humidity).

6.2. Ayyukan Button

• MIN/MAX Button: Press to cycle through minimum, maximum, and current readings for both temperature and humidity. Hold to reset min/max values.
• Maɓallin ƙararrawa: Danna zuwa view current alarm settings. Hold to enter alarm setting mode (refer to section 6.4).
• Maballin Ajiye: Press to manually save a data point.

6.3. Rajistar bayanai

The TM320 automatically logs data at a pre-set interval. Data can be viewed on the display or downloaded to a computer.

6.4. Kafa larararrawa

The device features audio/visual alarms for out-of-range conditions.

1. Latsa ka riƙe Ƙararrawa button until the alarm setting mode is activated.
2. Yi amfani da MIN / MAX button to navigate between temperature and humidity alarm settings (high/low).
3. Yi amfani da ACE button to adjust the alarm threshold values.
4. Latsa Ƙararrawa again to confirm and exit the setting mode.

6.5. Data Download (USB)

1. Connect the TM320 to your computer using a compatible USB cable (refer to Figure 4.2 for port location).
2. The device should be recognized as a removable storage device or require specific Dickson software (refer to manufacturer's webshafin yanar gizo na software).
3. Follow the software instructions to download and analyze the logged data.

6.6. Data Transfer (Flash Card)

If your model supports flash card data recovery:

1. Insert a compatible SD card into the SD card slot (refer to Figure 4.4).
2. The device may automatically transfer data or require a specific button press (consult software/manual for details).
3. Remove the SD card and insert it into a computer's card reader to access the data.

7. Kulawa

7.1. Tsaftacewa

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the sensor vents or ports.

7.2. Madadin Baturi

Replace batteries when the low battery indicator appears on the display. Follow the battery installation steps in Section 5.1.

7.3. Adana

When not in use for extended periods, remove the batteries and store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Shirya matsala

9. Ƙayyadaddun bayanai

10. Garanti da Tallafawa

This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Dickson website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Dickson customer service through their official channels.

Dickson Official Website: www.dicksonlogger.com