Gabatarwa
This manual provides comprehensive instructions for the setup, operation, and maintenance of your InFocus IN1102 Ultra Mobile Widescreen DLP Projector. Please read this manual thoroughly before using the projector to ensure proper functionality and to maximize its performance and lifespan.
The InFocus IN1102 is designed for portability and performance, featuring WXGA native resolution, 2200 lumens brightness, and DisplayLink™ USB connectivity for simplified setup.
Me ke cikin Akwatin
Upon unpacking your InFocus IN1102 projector, please verify that all the following items are included:
- InFocus IN1102 Projector
- Igiyar Wutar Lantarki
- Navigator II Remote
- USB (A to mini-B) Cable
- Na'urar VGA
- Daukar Harka
Samfurin Ƙarsheview
Familiarize yourself with the various components and connection points of your InFocus IN1102 projector.
Hoto 1: Gaba View with Lens Cap. This image shows the front of the InFocus IN1102 projector, featuring the lens covered by a protective cap and the InFocus logo prominently displayed. The ventilation grille is visible on the left side.
Hoto 2: Gaba View without Lens Cap. This image displays the front of the projector with the lens cap removed, revealing the projector lens. The InFocus branding and ventilation are clearly visible.
Figure 3: Rear Panel with Connectivity Ports. The rear panel of the InFocus IN1102 is shown, highlighting the various input ports including DisplayLink USB, VGA (Computer 1 and Computer 2), Video 1 (S-Video), Video 2 (Composite), and Audio In. The power input socket is on the far left.
Figure 4: Top Panel and Control Keypad. Wannan hoton yana ba da sama-sama view of the projector, showcasing the LiteTouch™ control panel with buttons for power, auto image, keystone, menu, select, volume, and source selection. The InFocus logo is centered on the top surface.
Hoto 5: Angled View with Adjustable Foot. An angled perspective of the projector, illustrating the front adjustable foot extended for tilt adjustment. The lens and front ventilation are visible.
Saita
- Wuri: Position the projector on a stable, flat surface. Ensure adequate ventilation around the unit. Adjust the front foot to achieve the desired projection angle.
- Haɗin Wuta: Connect the supplied power cord to the projector's power input socket (refer to Figure 3) and then to a grounded electrical outlet.
- Connecting a Source:
- DisplayLink™ USB: For quick setup, connect the USB (A to mini-B) cable from your computer's USB port to the "Computer 1 DisplayLink" USB port on the projector (refer to Figure 3). This eliminates the need for a separate VGA cable and simplifies configuration.
- VGA: Connect the supplied VGA cable from your computer's VGA output to either the "Computer 1" or "Computer 2" VGA input on the projector (refer to Figure 3).
- Shigarwar Bidiyo: For standard video sources, use the "Video 1" (S-Video) or "Video 2" (Composite) inputs. Connect audio using the "Audio In" port if necessary.
- Kunna Wuta: Press the power button on the projector's control panel (refer to Figure 4) or the remote control. The projector will initiate its startup sequence.
- Daidaita Mayar da hankali: Rotate the focus ring on the projector lens until the projected image is sharp and clear.
Umarnin Aiki
Powering On/Off (LiteSwitch™)
The InFocus IN1102 features LiteSwitch™ technology for instant power on and off. Press the power button once to turn the projector on. To turn it off, press the power button again. There is no "cool down" period required, allowing for faster transitions between meetings.
Using the LiteTouch™ Keypad
The backlit LiteTouch™ control panel on the top of the projector (Figure 4) provides direct access to common functions:
- Maɓallin Wuta: Yana kunna majigi ko kashewa.
- Hoto ta atomatik: Automatically optimizes the image settings for the current input source.
- Dutse Adjusts the image to correct for trapezoidal distortion if the projector is not perfectly perpendicular to the screen.
- Menu: Yana shiga menu na nunin allo (OSD) don saitunan ci gaba.
- Zaɓi: Confirms selections within the OSD menu.
- Girma: Yana daidaita matakin fitar da sauti.
- Source: Cycles through available input sources (Computer 1, Computer 2, Video 1, Video 2).
DisplayLink™ Connectivity
When using DisplayLink™ via USB, the projector automatically detects the connection and displays content from your computer. This technology simplifies setup by eliminating the need for complex display settings on your computer.
Image Orientation for Mounting
The InFocus IN1102 supports horizontal image flipping for rear projection setups. However, it does not include a built-in vertical image flip option for ceiling-mounted installations. If ceiling mounting is desired, third-party software on the connected computer may be required to invert the image vertically. Please consult your computer's operating system or display driver settings for this functionality.
Kulawa
Tsaftace Majigi
- Na waje: Yi amfani da laushi mai laushi mara laushi dampened with water or a mild, non-abrasive cleaner to wipe the projector's casing. Avoid harsh chemicals.
- Lens: Gently clean the projector lens with a lens cleaning cloth or a soft, dry, lint-free cloth. Do not use abrasive materials or excessive force.
Zane-Yancin Tace
The InFocus IN1102 utilizes DLP® technology with a filter-free design, which reduces the need for regular filter cleaning or replacement, simplifying maintenance.
Shirya matsala
Idan kun ci karo da al'amura tare da majigi, koma ga matsalolin gama gari da mafita:
- Babu Hoton da Aka Nuna:
- Ensure the projector is powered on and the lamp yana haskakawa.
- Verify that the video cable (USB or VGA) is securely connected to both the projector and the source device.
- Press the "Source" button on the projector or remote to cycle through input sources until the correct one is selected.
- Check your computer's display settings to ensure the external display is enabled or duplicated.
- Hoton yana da duhu:
- Daidaita zoben mayar da hankali akan ruwan tabarau na majigi.
- Ensure the projection surface is flat and the projector is at an appropriate distance.
- Image is Trapezoidal (Wider at Top/Bottom):
- Use the "Keystone" adjustment on the control panel to correct the image shape.
- Ideally, position the projector perpendicular to the screen to minimize keystone correction.
- Babu Audio:
- Ensure the audio cable is connected if using VGA or video inputs. DisplayLink™ USB typically carries audio.
- Adjust the volume using the projector's controls or the remote.
- Check the audio output settings on your source device.
For further assistance, please refer to the InFocus support website ko tuntuɓar sabis na abokin ciniki.
Ƙayyadaddun bayanai
Key technical specifications for the InFocus IN1102 projector:
| Siffar | Ƙayyadaddun bayanai |
|---|---|
| Ƙudurin Ƙasa | WXGA (1280 x 800) |
| Haske | 2200 ANSI Lumens (1650 lm Eco Mode) |
| Adadin Kwatance | 1800:1 |
| Nunin Fasaha | DLP® with BrilliantColor™ |
| Haɗuwa | DisplayLink™ USB, VGA (x2), S-Video, Composite Video, Audio In |
| Nauyin Abu | 2.65 fam (1.2 kg) |
| Girman samfur | 15.75 x 7 x 10.75 inci |
| Siffa ta Musamman | Hadin Kan Magana |
Garanti da Taimako
The InFocus IN1102 projector comes with the following limited warranty:
- Sassa: shekaru 5
- Aiki: shekaru 2
- Lamp: Wata 6
For warranty claims, technical support, or additional product information, please visit the official InFocus webshafin yanar gizo ko tuntuɓi sashen kula da abokan ciniki. Ajiye rasitin siyan ku a matsayin shaidar siye don tabbatar da garanti.
