Draytek Vigor 3120 G.SHDSL Security Router User Manual

1. Gabatarwa

The Draytek Vigor 3120 is a G.SHDSL Security Router designed for reliable and secure network connectivity. It features a G.SHDSL WAN port for high-speed digital subscriber line connections, along with multiple LAN ports for local network devices. This router integrates advanced security features such as a comprehensive firewall and VPN capabilities to ensure secure and efficient network operations.

2. Jagorar Saita

2.1. Abubuwan Kunshin

Kafin ci gaba, tabbatar da duk abubuwan da aka haɗa:

• Draytek Vigor 3120 Router
• Adaftar Wuta
• Ethernet Cable
• Jagoran Farawa Mai sauri (idan an haɗa)

2.2. Haɗin Jiki

Refer to the image below for port identification on the front panel of the Vigor 3120 router.

Figure 1: Front Panel of Draytek Vigor 3120 Router. This image displays the router's front panel, highlighting the DSL port, four LAN ports, a USB port, and various LED indicators for activity, VPN, QoS, PRN, DSL link, LAN link/activity, and a reset button.

1. Haɗin Wuta: Haɗa adaftar wutar lantarki zuwa shigarwar wutar lantarki ta na'urar sadarwa sannan zuwa wurin fitar da wutar lantarki.
2. WAN Connection (DSL): Connect your G.SHDSL line to the router's DSL tashar jiragen ruwa.
3. Haɗin LAN: Connect your local network devices (computers, switches, access points) to the router's Farashin LAN1-4 tashoshin jiragen ruwa.
4. Haɗin USB: For 3.5G Mobile Broadband support or other USB devices, connect a compatible USB modem or device to the USB tashar jiragen ruwa.

2.3. Kanfigareshan Farko

Don shiga cikin na'ura mai ba da hanya tsakanin hanyoyin sadarwa web- tushen tsarin gudanarwa:

1. Tabbatar cewa kwamfutarka tana da haɗin kai da ɗaya daga cikin tashoshin LAN na na'urar sadarwa.
2. Bude a web browser (misali, Chrome, Firefox, Edge).
3. In the address bar, type the default IP address (commonly 192.168.1.1 or refer to the Quick Start Guide) and press Enter.
4. Shigar da tsoho sunan mai amfani da kalmar sirri (yawanci admin for both, or as specified in the guide).
5. Follow the on-screen wizard for initial setup, including WAN configuration and wireless settings.

3. Umarnin Aiki

3.1. G.SHDSL WAN Connectivity

The Vigor 3120 provides a dedicated G.SHDSL WAN port for high-speed, symmetrical digital subscriber line connections. Configure your G.SHDSL parameters, such as encapsulation mode and VPI/VCI settings, through the router's web interface under the WAN settings.

3.2. Wireless (802.11n) Configuration

The router provides 802.11n wireless connectivity. Access the "Wireless LAN" section in the web interface to:

• Set up your Wi-Fi network name (SSID).
• Configure security settings (WPA2-PSK recommended).
• Adjust channel and bandwidth settings for optimal performance.

3.3. VPN (Virtual Private Network)

The Vigor 3120 supports various VPN protocols (e.g., IPSec, PPTP, L2TP) for secure remote access and site-to-site connections. Configure VPN tunnels via the "VPN" menu in the web dubawa.

3.4. Firewall and Security

Utilize the built-in firewall to protect your network. Features include:

• Tace fakiti
• DoS/DDoS Tsaro
• Tace abun ciki
• Object-based Firewall Rules

3.5. USB 3.5G Support

The USB port allows connection of a 3.5G USB modem for mobile broadband connectivity, serving as a backup or primary connection. Ensure your 3.5G modem is compatible with the Vigor 3120.

4. Kulawa

4.1. Sabuntawar Firmware

Regularly check the Draytek website for firmware updates. Updating the firmware can improve performance, add new features, and address security vulnerabilities. Always back up your configuration before performing a firmware update.

4.2. Configuration Backup and Restore

It is recommended to back up your router's configuration settings periodically. This allows for quick restoration of your settings in case of a factory reset or hardware replacement. Access this feature in the "System Maintenance" section of the web dubawa.

4.3. Cleaning and Environment

Keep the router in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Clean the exterior with a soft, dry cloth. Do not use liquid or aerosol cleaners.

5. Shirya matsala

5.1. LED Manuniya

LEDs na gaban panel suna ba da bayanin matsayi:

• ACT: Indicates system activity.
• VPN: Lit when a VPN tunnel is active.
• QoS: Indicates Quality of Service is active.
• PRN: Printer status (if USB printer connected).
• DSL: Indicates DSL line status (link/activity).
• LNK/LAN (1-4): Indicates link status and activity for each LAN port.
• RST: Reset button (press and hold for factory reset).

5.2. Matsalolin gama gari da Mafita

• Babu Haɗin Intanet:
  • Check DSL cable connection.
  • Verify DSL modem/line status.
  • Ensure WAN settings in router are correct (e.g., G.SHDSL parameters).
  • Reboot DSL modem and router.
• Slow Ayyukan Sadarwa:
  • Check for high bandwidth usage by devices.
  • Verify wireless channel interference.
  • Tabbatar cewa firmware ya sabunta.
• Ba za a iya shiga ba Web Interface:
  • Ensure computer is connected to a LAN port.
  • Verify computer's IP address is in the same subnet as the router.
  • Gwada wani daban web mai bincike.
  • Perform a soft reboot of the router.

Idan matsalolin sun ci gaba, yi la'akari da yin sake saitin masana'anta (note: this will erase all configurations) or contact technical support.

6. Ƙayyadaddun bayanai

7. Garanti Bayani

Draytek products typically come with a limited manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty card included with your product or visit the official Draytek website. Ajiye shaidar siyan ku don da'awar garanti.

8. Tallafin Fasaha

For technical assistance, product inquiries, or advanced configuration guidance, please contact Draytek technical support:

• Na hukuma Website: Ziyarci www.draytek.com for support resources, FAQs, firmware downloads, and contact information.
• Taimako kan layi: Many regions offer online ticketing systems or email support.
• Tallafin Waya: Check the Draytek webshafin yanar gizo don lambobin tallafin waya na yanki.

When contacting support, have your product model (Vigor 3120 / VIGOR3120) and serial number ready.