InSinkErator E101

InSinkErator Evergrind E101 1/3 HP Garbage Disposer

Samfura: E101

Alamar: InSinkErator

Gabatarwa

This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of your InSinkErator Evergrind E101 1/3 HP Garbage Disposer. Designed for quick and easy installation with a space-saving, compact design, this unit efficiently handles food waste. Please read this manual thoroughly before beginning installation or operation to ensure proper use and to prevent potential hazards.

Muhimman Bayanan Tsaro

GARGADI: Failure to follow these safety instructions could result in fire, electric shock, serious injury, or property damage.

Saita da Shigarwa

The InSinkErator Evergrind E101 features a Quick Lock mounting system designed for fast and easy installation, often compatible with existing InSinkErator mounts. This model is a non-corded unit, meaning a power cord accessory kit (sold separately) or direct wiring to an existing electrical connection is required.

Matakan Shigarwa:

  1. Shiri: Ensure power to the circuit is off at the breaker. Remove any existing disposer or sink flange. Clean the sink opening thoroughly.
  2. Mounting Assembly: Apply plumber's putty around the sink flange and press it firmly into the sink opening. From underneath the sink, install the fiber gasket, backup flange, and mounting ring. Secure with the snap ring and tighten the mounting screws evenly.
  3. Haɗin Wutar Lantarki: For non-corded models, connect the disposer's electrical wires to the household wiring or a power cord kit according to local electrical codes. Ensure proper grounding.
  4. Dishwasher Connection (if applicable): If connecting a dishwasher, remove the knockout plug from the disposer's dishwasher inlet using a screwdriver and hammer.
  5. Magudana Connection: Connect the disposer's discharge tube to the household drain pipe. If replacing an older unit, you may need to adjust or replumb the drain pipes to align with the E101's outlet position.
  6. Attach Disposer: Align the disposer's three mounting tabs with the mounting ring. Twist the disposer until the tabs lock into place.
  7. Gwaji: Restore power, check for leaks, and test the unit with water.

For a visual guide on the installation process, please refer to the video below. Note that the installation of the retaining clip and flange may require assistance to hold components in place.

Evergrind E101 1/3 HP Garbage Disposer product box showing features like 1/3 HP, 1-year warranty, fast & easy installation, and space-saving design.

Figure 1: Evergrind E101 1/3 HP Garbage Disposer product packaging, highlighting key features and the Quick Lock mounting system.

Bidiyo na 1: Shigarwa ta ƙareview of the 1/3 HP Evergrind Food Disposal by InSinkErator. This video demonstrates the process of installing the disposer under a sink, including connecting it to the sink flange and plumbing. It highlights the steps involved in setting up the unit for operation.

Umarnin Aiki

To operate your InSinkErator Evergrind E101 garbage disposer, follow these simple steps:

  1. Turn on a medium stream of cold water.
  2. Turn on the disposer by flipping the wall switch.
  3. Scrape food waste into the sink opening. Do not overload the disposer.
  4. Continue running cold water for a few seconds after grinding is complete to flush the drain line.
  5. Turn off the disposer, then turn off the water.

Lura: Always use cold water when operating the disposer. Cold water keeps grease and fats in a solid state so they can be flushed away, preventing clogs.

Kulawa

Regular maintenance helps ensure the longevity and efficient performance of your Evergrind E101 disposer.

Shirya matsala

Koma zuwa teburin da ke ƙasa don batutuwan gama gari da mafitarsu.

MatsalaDalili mai yiwuwaMagani
Disposer does not start (no sound)No power, tripped circuit breaker, or reset button.Check circuit breaker. Press the red reset button on the bottom of the disposer. Ensure unit is plugged in (if corded).
Disposer hums but does not grindJam in the grind chamber.Turn off power. Insert Allen wrench into the center hole at the bottom of the disposer and turn back and forth. Remove object with tongs if visible.
Leaks from the disposerLoose connections, cracked housing, or worn seals.Check all plumbing connections and tighten if loose. Inspect housing for cracks. If leaks persist, professional service may be required.
Wari mara dadiFood particles trapped in the grind chamber or drain.Grind citrus peels (lemon, orange) with cold water. Clean the splash guard.

Ƙayyadaddun bayanai

SiffarDaki-daki
Lambar SamfuraE101
Ƙarfin doki1 / 3 HP
Nau'in MotociInduction Motor
Grinding ElementsGalvanized steel with two stainless steel 360° swivel lugs
Nau'in hawaQuick Lock Plate Mount
Voltage120 Volts
Watatage840 watts
Girman samfur (L x W x H)7 x 7 x 11.5 inci
Nauyin Abu5.22 fam
Kayan abuGalvanized Karfe
SaloNon-Corded
Abubuwan da aka haɗa1/3 HP Disposer, sink flange, and stopper
UPC050375006626

Bayanin Garanti

The InSinkErator Evergrind E101 1/3 HP Garbage Disposer comes with a 1-Year Parts and Service Warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full terms and conditions, refer to the warranty card included with your product or visit the official InSinkErator website.

Tallafin Abokin Ciniki

Should you require assistance with installation, operation, troubleshooting, or warranty claims, please contact InSinkErator customer support. You can typically find contact information on the official InSinkErator website or in the documentation provided with your product. When contacting support, please have your model number (E101) and proof of purchase readily available.