1. Gabatarwa
This manual provides instructions for the installation, operation, and maintenance of the Watts 98CP Trip Lever Bath Drain. This product is designed for use in bathtubs, featuring an 18-inch, 20-gauge brass construction with a chrome-plated trip lever trim for a finished appearance.
Hoto na 1: Watts 98CP Trip Lever Bath Drain assembly. This image displays the complete drain unit, including the chrome-finished trip lever overflow plate, the brass overflow tube, the brass T-fitting, the brass waste shoe, and the chrome-finished drain stopper.
2. Ƙayyadaddun samfur
| Lambar Samfura | 98CP |
| Lambar Sashe | 98CP (0145797) |
| Kayan abu | Brass |
| Ma'auni | 20 ma'auni |
| Girman | 1-1/2 Inci |
| Tsawon | 18-Inch (overflow tube) |
| Gama | Polished Chrome Trim, Brass Piping |
| Nauyin Abu | 4.8 fam |
| Siffofin Musamman | Tasha mai cirewa |
3. Aka gyara
The Watts 98CP Trip Lever Bath Drain assembly typically includes the following main components:
- Trip Lever Overflow Plate: The visible chrome-plated plate with the trip lever mechanism, located on the bathtub's overflow opening.
- Overflow Tube: The vertical brass pipe connecting the overflow plate to the T-fitting.
- T-Fitting: A brass connector that joins the overflow tube and the waste shoe.
- Waste Shoe: The horizontal brass pipe that connects the T-fitting to the bathtub's drain opening.
- Drain Stopper: A chrome-plated stopper mechanism operated by the trip lever, designed to seal the bathtub drain.
- Gaskets and Washers: Various rubber or plastic seals to ensure watertight connections.
4. Umarnin Shigarwa
Installation of a bath drain requires plumbing knowledge and tools. If you are not comfortable performing this installation, it is recommended to consult a qualified plumber.
4.1. Required Tools and Materials (Not Included)
- Plumber's putty ko silicone sealant
- Adjustable wrench or channel locks
- Screwdriver (Phillips or flathead, depending on overflow plate screws)
- Ma'aunin tef
- Hacksaw or pipe cutter (if trimming is required)
4.2. Matakan Shigarwa na Gabaɗaya
- Prepare the Bathtub: Ensure the bathtub's drain and overflow openings are clean and free of debris.
- Assemble the Drain: Connect the overflow tube to the T-fitting and the waste shoe. Ensure all gaskets are properly seated. Hand-tighten connections initially.
- Install Drain Stopper: Insert the drain stopper mechanism into the waste shoe.
- Aiwatar Sealant: Apply a bead of plumber's putty or silicone sealant around the underside of the drain flange (the part that sits inside the tub drain opening) and around the overflow gasket.
- Position in Tub: From inside the tub, insert the drain flange into the drain opening. From underneath the tub, align the waste shoe with the drain flange and secure it with the provided nut, tightening carefully to avoid overtightening.
- Install Overflow Plate: Position the overflow gasket and the trip lever overflow plate over the overflow opening. Secure the plate with the screws provided, ensuring the trip lever mechanism is correctly aligned with the internal stopper rod.
- Gwaji don Leaks: Fill the bathtub with water and check all connections for leaks. Operate the trip lever to ensure the drain stopper functions correctly. Tighten any leaking connections as needed.
Note: Some installations may require cutting the overflow tube or waste shoe to fit specific bathtub dimensions. Measure carefully before cutting.
5. Aiki
The Watts 98CP Bath Drain utilizes a trip lever mechanism to control the drain stopper.
- Don Rufe Magudanar Ruwa: Push the trip lever handle down. This action lowers the internal stopper, sealing the bathtub drain opening and allowing the tub to fill with water.
- Don Buɗe Magudanar Ruwa: Pull the trip lever handle up. This action raises the internal stopper, opening the bathtub drain and allowing water to flow out.
Ensure the lever moves freely and the stopper fully engages and disengages. If the stopper does not seal properly, check for obstructions or adjust the stopper mechanism if accessible.
6. Kulawa da Tsaftacewa
Regular maintenance helps ensure the longevity and proper function of your bath drain.
- Cleaning the Trim: Clean the chrome-plated trim with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive scrubbers, which can damage the finish.
- Clearing the Drain: Periodically remove the drain stopper (if removable) and clear any hair or debris that may accumulate. For clogs further down the drain, use a plumbing snake or a chemical drain cleaner specifically designed for plumbing systems, following product instructions carefully.
- Duban Leaks: Regularly inspect visible connections for any signs of leaks. Address minor leaks by tightening connections or replacing worn gaskets.
7. Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Rage fitar ruwa a hankali | Hair or debris accumulation in the drain or stopper mechanism. | Remove the drain stopper and clear any obstructions. Use a plumbing snake if the clog is deeper. |
| Drain Does Not Seal | Stopper mechanism misaligned or obstructed. | Check for debris around the stopper. Ensure the trip lever rod is correctly connected to the stopper. Adjust the stopper if it has an adjustment screw. |
| Leaks Ruwa | Haɗi mara kyau ko kuma gaskets da suka lalace. | Inspect all connections (drain flange, overflow plate, T-fitting). Tighten any loose nuts. Replace worn or damaged gaskets. Reapply plumber's putty if necessary. |
| Trip Lever Stiff/Stuck | Corrosion or debris in the lever mechanism. | Remove the overflow plate and inspect the lever mechanism. Clean any corrosion or debris. Apply a small amount of silicone grease if needed. |
8. Garanti Bayani
Watts Regulator Company (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.
9. Tallafin Abokin Ciniki
For further assistance, technical support, or warranty claims, please contact Watts customer service. Refer to the official Watts website don bayanin lamba na yanzu.
Watts Website: www.watts.com
