Gabatarwa
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Leviton N0016 16-Channel Demultiplexer. This device is designed to interface NSI Micro-Plex systems with 0-10 Volt dimmer packs, enabling seamless control of lighting systems.
Hoto na 1: Gaba view of the Leviton N0016 16-Channel Demultiplexer, showing input/output ports and indicator LEDs.
Bayanin Tsaro
Always disconnect power before installation or servicing. This device operates at 120V and should only be installed by qualified personnel in accordance with local electrical codes. Do not expose to moisture or extreme temperatures.
Saita da Shigarwa
The Leviton N0016 is designed for 19-inch rack mounting. Follow these steps for proper installation:
- hawa: Secure the demultiplexer into a standard 19-inch equipment rack using appropriate mounting hardware. Ensure adequate ventilation around the unit.
- Haɗin Wuta: Connect the unit to a 120V AC power source. Verify the power indicator LED illuminates.
- NSI Micro-Plex Input: Connect the NSI Micro-Plex cable from your controller to the "MICRO-PLEX IN" port on the demultiplexer.
- 0-10V Dimmer Output: Connect the 0-10V control lines from the demultiplexer's 16 output channels to your 0-10V dimmer packs. Each channel corresponds to a specific dimmer.
- Channel Assignment: The unit is user programmable for assignment of any of a possible 128 channels. Refer to the programming section for detailed instructions on assigning Micro-Plex channels to the 0-10V outputs.
Umarnin Aiki
Once installed and powered, the N0016 demultiplexer operates by converting NSI Micro-Plex signals into 0-10V analog control signals for dimmer packs.
- Alamar LED: Observe the LED operation/intensity indicators for each channel. These LEDs provide visual feedback on the output level of each 0-10V channel.
- Atomatik Lamp Aikin Gwaji: The unit features an automatic lamp test function. Consult the full technical manual for details on activating and interpreting this feature.
- Shirye-shirye: To program channel assignments, refer to the detailed programming guide provided with the product. This allows you to map specific NSI Micro-Plex channels to the 16 output channels of the demultiplexer.
Kulawa
The Leviton N0016 demultiplexer requires minimal maintenance. Ensure the unit is kept clean and free from dust. Periodically check all cable connections for security. No user-serviceable parts are inside. Refer all servicing to qualified personnel.
Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| No power indicator LED | No AC power, faulty power cable | Check power connection, test outlet, replace power cable. |
| Dimmer baya amsawa | Incorrect channel assignment, faulty 0-10V connection, dimmer issue | Verify channel programming, check 0-10V wiring, test dimmer independently. |
| Intermittent control | Loose cable connections, interference | Secure all Micro-Plex and 0-10V connections. Ensure proper grounding. |
If issues persist after attempting these solutions, contact Leviton customer support.
Ƙayyadaddun bayanai
- Samfura: N0016
- Shigarwa: NSI 128 Channel Micro-Plex
- Fitowa: 16 Channels, 0-10V
- Ƙarfi: 120V AC
- hawa: 19-inch Rack Mountable Chassis
- Girma: Approximately 22 x 7.5 x 5.7 inches (Package)
- Nauyi: Kimanin kilo 4.6
- Siffofin: LED Operation/Intensity Indicators, Automatic Lamp Test Function, User Programmable Channel Assignment
Bayanin Garanti
Specific warranty details for the Leviton N0016 are typically provided with the product packaging or available on the official Leviton website. Please refer to those resources for the most current and complete warranty terms and conditions.
Taimako
For technical assistance, additional documentation, or customer service, please visit the official Leviton website or contact their support department.
Leviton Official Website: www.leviton.com
Leviton Store on Amazon: Visit the Leviton Store
