Weiser SmartCode 5 Electronic Deadbolt (9GED14900-001) User Manual

Gabatarwa

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Weiser SmartCode 5 Electronic Deadbolt. The SmartCode 5 deadbolt offers keyless entry convenience with a keypad and enhanced security features, including SmartKey re-key technology. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lock.

Image: The Weiser SmartCode 5 Electronic Deadbolt in Polished Brass finish, featuring a keypad and traditional keyhole.

Siffofin Samfur

• Shigar Mara Maɓalli: Operate the deadbolt using a personalized code on the electronic keypad.
• SmartKey Re-key Technology: Re-key the lock yourself in seconds in three easy steps, allowing you to match your existing keys.
• Traditional Keyed Entry: Includes a standard keyhole for manual operation.
• Interior Turn Button: Lock or unlock the deadbolt from the inside with a simple turn.
• Ingantaccen Tsaro: Designed for exterior doors where robust security is essential.
• Gina Mai Dorewa: Features a 1-inch deadbolt throw for added security.

Image: Diagram illustrating the SmartKey Security features, including resistance to kick-ins, bumps, picks, drills, and saws.

Saita da Shigarwa

Proper installation is crucial for the optimal performance and security of your SmartCode 5 deadbolt. It is recommended to follow the detailed instructions provided in the separate installation guide included with your product. Ensure your door preparation meets the specified dimensions before beginning installation.

Maɓalli Matakan Shigarwa:

1. Prepare the door and frame according to the provided template.
2. Install the latch and strike plate.
3. Install the exterior keypad assembly.
4. Install the interior assembly, ensuring proper cable connection.
5. Insert 4 AA batteries (not included) into the battery pack.
6. Perform the door handing process to calibrate the lock.

SmartKey Re-keying Instructions:

The SmartKey feature allows you to re-key your lock to an existing key. This process takes seconds and requires your functioning key and the SmartKey tool.

1. Insert the currently programmed key fully into the keyhole and turn it 90 degrees clockwise to the horizontal position.
2. Insert the SmartKey tool firmly and fully into the SmartKey hole. Remove the SmartKey tool.
3. Remove the currently programmed key.
4. Insert the new key you wish to use fully into the keyhole and turn it 90 degrees counter-clockwise to the vertical position.
5. Remove the new key. The lock is now re-keyed. Test with the new key to ensure proper operation.

Image: The Weiser SmartCode 5 Electronic Deadbolt installed on a dark wooden door, showcasing its appearance in a home setting.

Umarnin Aiki

Kulle Ƙofar:

• From Outside (Keypad): Press the 'Lock' button (the padlock icon) on the keypad.
• From Outside (Key): Insert your key and turn it to lock the deadbolt.
• Daga Ciki: Turn the thumb turn on the interior assembly to the locked position.

Buɗe Ƙofar:

• From Outside (Keypad): Enter your 4-8 digit user code. The deadbolt will retract.
• From Outside (Key): Insert your key and turn it to unlock the deadbolt.
• Daga Ciki: Turn the thumb turn on the interior assembly to the unlocked position.

Lambobin Masu Amfani:

The lock comes with a default programming code and two default user codes. It is highly recommended to change these immediately after installation.

1. Open the battery cover on the interior assembly.
2. Press the 'Program' button once.
3. Enter the 4-digit Programming Code (default is 0-0-0-0).
4. Press the 'Lock' button.
5. Shigar da sabuwar Lambar Mai Amfani mai lambobi 4-8.
6. Press the 'Lock' button.
7. Test the new user code to ensure it unlocks the door.

Refer to the full programming guide for instructions on deleting codes, enabling/disabling auto-lock, and other advanced features.

Kulawa

Madadin Baturi:

The SmartCode 5 deadbolt requires 4 AA batteries. When the batteries are low, the lock will emit a series of beeps and/or flash a red light during operation. Replace all four batteries simultaneously with new, high-quality alkaline AA batteries.

1. Cire murfin baturin daga taron ciki.
2. Cire tsoffin batura.
3. Insert four new AA alkaline batteries, observing correct polarity (+/-).
4. Sauya murfin baturin.

Tsaftacewa:

Don tsaftace makullin, yi amfani da taushi, damp cloth. Avoid abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and electronic components.

Shirya matsala

If you encounter issues with your Weiser SmartCode 5 Electronic Deadbolt, refer to the following common solutions:

• Kulle baya amsawa: Duba matakan batirin kuma a maye gurbinsa idan ya cancanta. Tabbatar cewa haɗin kebul tsakanin kayan haɗin waje da na ciki yana da aminci.
• Keypad ɗin ba ya kunna wuta: This usually indicates dead batteries. Replace all four AA batteries.
• Ƙarfin Deadbolt ba ya miƙewa/ja da baya gaba ɗaya: Ensure the door frame strike plate is properly aligned and the door is not warped. Perform the door handing process again.
• User code not working: Verify the code is entered correctly. Try reprogramming the user code. Ensure the programming code has not been changed or forgotten.
• SmartKey re-keying issue: Ensure the original key is fully inserted and turned 90 degrees. The SmartKey tool must be inserted firmly and fully.

For more complex issues or if the problem persists, contact Weiser customer support or consult the full troubleshooting guide available on the Weiser website.

Ƙayyadaddun bayanai

Garanti da Taimako

Weiser products are backed by a limited lifetime mechanical and finish warranty, and a 1-year limited electronics warranty. For specific warranty details, claims, or technical support, please visit the official Weiser website ko tuntuɓi sashen sabis na abokin ciniki. Ajiye shaidar siyan ku don dalilai na garanti.

Weiser Customer Support: Refer to your product packaging or the official Weiser website don bayanin lamba na yanzu.