Casio AW-90H-2BVDF Wristwatch User Manual

Gabatarwa

Thank you for choosing the Casio AW-90H-2BVDF Wristwatch. This manual provides essential information regarding the setup, operation, and maintenance of your watch. Please read it carefully to ensure proper use and to maximize the lifespan of your timepiece.

Hoto: Gaba view of the Casio AW-90H-2BVDF Wristwatch, displaying its analog and digital time displays.

Gabaɗaya Jagora

Your Casio AW-90H-2BVDF watch features both analog hands and a digital display. It typically includes multiple buttons for various functions. While specific button labels may vary, common functions are usually assigned to buttons located on the sides of the watch case.

• Maɓallin Yanayin: Cycles through different modes (Timekeeping, Alarm, Stopwatch, Dual Time).
• Maɓallin Gyara: Used to select items for setting in various modes.
• Fara/Tsaya Button: Used to start/stop stopwatch, or change values during setting.
• Maɓallin Haske: Activates the backlight for illumination.

Hoto: Gefe view of the Casio AW-90H-2BVDF Wristwatch, highlighting one of the control buttons.

Setup and Timekeeping

Saita Lokaci na Dijital da Kwanan wata

1. A cikin Yanayin Tsara lokaci, danna maɓallin Daidaita button until the seconds digits start to flash, indicating the setting screen.
2. Danna maɓallin Yanayin button to cycle through the setting options: Seconds → Hour → Minutes → Year → Month → Day.
3. Yi amfani da Fara/Dakata button to increase the flashing value. Hold down to change rapidly.
4. Da zarar duk saituna sun yi daidai, danna maɓallin Daidaita maballin don fita allon saitin.

Adjusting Analog Hands

The analog hands are typically synchronized with the digital time. If they are out of alignment, refer to the specific hand adjustment procedure in the full module manual (available on the Casio website by searching your model number). Generally, this involves entering a hand setting mode and using buttons to move the hands.

Hanyoyin Aiki

Danna maɓallin Yanayin button to cycle through the watch's various functions:

• Yanayin Tsara Lokaci: Yana nuna lokaci da kwanan wata.
• Yanayin ƙararrawa: Saita kuma kunna ƙararrawa na yau da kullun.
• Yanayin Agogon Agogo: Auna ya wuce lokaci.
• Yanayin Lokaci Biyu: View the time in a different time zone.

Amfani da Ƙararrawa

1. Enter the Alarm Mode using the Yanayin maballin.
2. Danna maɓallin Daidaita button to enable setting the alarm time. The hour digits will flash.
3. Yi amfani da Fara/Dakata button to change the hour. Press Yanayin to switch to minutes and adjust.
4. Latsa Daidaita to confirm the alarm time.
5. To turn the alarm on/off, press the Fara/Dakata button while in Alarm Mode (not in setting mode).

Amfani da agogon awon gudu

1. Enter the Stopwatch Mode using the Yanayin maballin.
2. Danna maɓallin Fara/Dakata button to start the stopwatch.
3. Latsa Fara/Dakata sake dakatar da shi.
4. Danna maɓallin Daidaita maɓalli don sake saita agogon gudu zuwa sifili.

Haske

Danna maɓallin Haske button (if available) to illuminate the digital display for a few seconds in low-light conditions.

Kulawa da Kulawa

Resistance Ruwa

Your watch is marked with "WATER RESIST" on the case back, indicating it is suitable for everyday use and can withstand splashes or brief immersion in water. However, it is not designed for diving or prolonged water exposure. Do not operate buttons while the watch is wet or submerged.

Hoto: Na baya view of the Casio AW-90H-2BVDF Wristwatch, showing the stainless steel case back with "WATER RESIST" engraving.

Tsaftacewa

Wipe the watch with a soft, dry cloth to remove dirt and moisture. For stubborn dirt, use a soft cloth dampened with water and a mild neutral detergent, then wipe dry. Avoid using volatile agents like thinner or benzine, which may damage the resin components.

Bayanin Baturi

This watch uses one CR123A battery (included). When the display becomes dim or functions become erratic, it is time to replace the battery. Battery replacement should ideally be performed by a qualified watch technician to ensure proper sealing and water resistance.

Adana

When not in use for extended periods, store your watch in a dry place away from direct sunlight, extreme temperatures, and strong magnetic fields.

Shirya matsala

• Lokacin da Ba daidai ba: Ensure you have correctly set both the digital and analog times. If the analog hands are misaligned, refer to the hand adjustment procedure.
• Blank or Dim Display: Batirin yana iya zama ƙasa ko kuma ya lalace. Sauya batirin.
• Maɓallan Ba ​​Amsa: Ensure the watch is not in a locked mode (if applicable) or that it is not wet. If the issue persists after drying, the battery may be low.
• Agogon Ruwa na Ciki: If you notice condensation or water droplets inside the watch, have it inspected immediately by a qualified technician to prevent further damage.

Ƙayyadaddun bayanai

Bayanin Garanti

Your Casio watch is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your purchase or visit the official Casio webshafin don cikakken bayanin garantin.

Tallafin Abokin Ciniki

For further assistance, technical support, or service inquiries, please contact Casio customer support. You can find contact information and frequently asked questions on the official Casio website. When contacting support, please have your watch model number (AW-90H-2BVDF) readily available.