InFocus IN112 Portable DLP Projector User Manual

1. Gabatarwa

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Abin da ke cikin Akwatin

Tabbatar cewa duk abubuwan da aka jera a ƙasa an haɗa su cikin marufi na samfuran ku:

• InFocus IN112 Projector
• Igiyar wutar lantarki
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• Umarnin aminci
• Littafin mai amfani (wannan takarda)
• Ikon nesa

3. Projector Overview

Hoto 1: Sama View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Hoto 2: Gefe View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Hoto 3: Angled View tare da Daga nesa - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

Hoto 4: Na baya View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Saita

4.1 Wuri

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Haɗin Wuta

1. Haɗa igiyar wutar lantarki da aka bayar zuwa wurin shigar wutar lantarki na na'urar hangen nesa.
2. Toshe dayan ƙarshen igiyar wutar lantarki cikin mashin wutar lantarki.

4.3 Haɗa Tushen shigarwa

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Bidiyon Haɗe-haɗe: Use the A/V cable to connect to devices with composite video output.
• S-Bidiyo: Connect to devices with S-Video output.
• Audio A cikin: Haɗa kafofin sauti na waje ta amfani da kebul na sitiriyo 3.5mm.
• Saukewa: RS232C. For control and automation systems.
• USB B Mini: For control and firmware updates.

Tabbatar cewa an haɗa dukkan kebul ɗin da kyau kafin a kunna na'urar haska bayanai (projector).

5. Umarnin Aiki

5.1 Kunnawa / Kashewa

• Don kunnawa, danna maɓallin Ƙarfi button on the control panel or remote control. The power indicator light will illuminate.
• Don kashe wuta, danna maɓallin Ƙarfi button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2 Daidaita Hoto

• Mayar da hankali: Rotate the focus ring on the projector lens until the image is sharp and clear.
• Dutse Yi amfani da Dutsen Maɓalli buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Zaɓin Tushen

Danna maɓallin Source button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Kewayawa Menu

Danna maɓallin Menu/Fita button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Zaɓi or Shiga button to confirm selections. Press Menu/Fita again to close the menu.

5.5 Yanayin Eco

Activate Eco Mode to extend lamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Kulawa

6.1 lamp Sauyawa

Mai aikin majigi lamp yana da tsawon rai mai iyaka. Lokacin da lamp nuna alama (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Tsanaki: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Tsaftacewa

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Shirya matsala

8. Ƙayyadaddun bayanai

9. Garanti da Tallafawa

9.1 Garanti na Samfur

The InFocus IN112 projector is backed by a comprehensive warranty:

• Garanti mai iyaka na shekara 5 akan majigi.
• 2-shekara cikakken garanti rufe sassa da aiki.
• Garanti na watanni 6 na lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus website.

9.2 Tallafin Fasaha

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official website ko a cikin takardun da aka haɗa.

10. Related Product Information (IN130 Series)

Bidiyon da ke ƙasa yana nuna yadda ake yinview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.