1. Gabatarwa
Na gode da siyaasing the Sharp SPC106X LED Alarm Clock. This manual provides essential information for the proper setup, operation, and maintenance of your new alarm clock. Please read these instructions thoroughly before using the device.
The Sharp SPC106X features a clear 1.0" blue LED display, an ultra-thin design, and essential alarm functions including snooze. It is designed for indoor use and operates electrically with battery backup capability.
2. Bayanin Tsaro
- Tushen wutar lantarki: Yi amfani da ƙayyadadden adaftar wutar lantarki kawai. Tabbatar da voltage is compatible with your local power supply.
- Ruwa da Danshi: Kada a fallasa na'urar ga ruwan sama, danshi, ko ruwan da ke diga/fashewa. Kada a sanya abubuwan da ke cike da ruwa, kamar tukwane, a kan na'urar.
- Samun iska: Tabbatar da samun iska mai kyau. Kar a toshe buɗewar samun iska.
- Zafi: Ka kiyaye naúrar daga tushen zafi kamar radiators, rajistan zafi, murhu, ko wasu na'urori (ciki har da amplifiers) masu samar da zafi.
- Tsaftacewa: Tsaftace kawai da bushe bushe.
- Baturi: If using backup batteries, ensure they are inserted with correct polarity. Remove batteries if the unit is not used for an extended period.
3. Abubuwan Kunshin
- Sharp SPC106X LED Alarm Clock Unit
- Power Adapter (attached)
- Jagorar mai amfani (wannan takaddar)
Note: Batteries are not included and must be purchased separately for backup functionality.
4. Samfurin Ya Ƙareview
Familiarize yourself with the components of your Sharp SPC106X alarm clock:
Hoto 1: Gaba View of Sharp SPC106X LED Alarm Clock. This image displays the front of the black alarm clock with a bright blue 1.0" LED display showing "12:01". Indicators for "PM" and "ALARM" are visible on the left side of the display. The "SHARP" logo is centered below the time. The clock features an ultra-thin design case and a stable base.
Sarrafa da Manuniya:
- 1.0" Blue LED Display: Yana nuna lokaci na yanzu da lokacin ƙararrawa.
- Alamar PM: Lights up when the time displayed is PM.
- Alamar Ƙararrawa: Lights up when the alarm is set.
- Button LOKACI: An yi amfani dashi don saita lokacin yanzu.
- Maɓallin ƙararrawa: An yi amfani da shi don saita lokacin ƙararrawa.
- HOUR Button: Adjusts the hour for time or alarm settings.
- Maballin MIN: Adjusts the minute for time or alarm settings.
- Maɓallin SNOOZE/DIMMER: Located on top, this button activates snooze during an alarm and adjusts display brightness.
- ALARM ON/OFF Switch: Located on the side, this switch enables or disables the alarm.
- LOUD/SOFT Switch: Located on the side, this switch adjusts the alarm volume.
- Dakin Baturi: Located on the bottom for backup batteries (not included).
5. Saita
5.1. Haɗin Wuta
- Unpack the alarm clock and its power adapter.
- Plug the power adapter into a standard household outlet. The LED display will illuminate.
- (Optional) For battery backup, open the battery compartment on the bottom of the unit and insert 2 AAA batteries (not included). This will preserve time settings during a power outage.
5.2. Saita Lokacin Yanzu
- Latsa ka riƙe LOKACI button. The hour digits will begin to flash.
- Yayin rike da LOKACI button, danna SAA button repeatedly to advance to the correct hour. Observe the PM indicator for correct AM/PM setting.
- Duk da yake har yanzu rike da LOKACI button, danna MIN button repeatedly to advance to the correct minute.
- Saki da LOKACI Maɓalli. Lokaci ya yi yanzu.
6. Umarnin Aiki
6.1. Kafa theararrawa
- Latsa ka riƙe Ƙararrawa button. The alarm hour digits will begin to flash.
- Yayin rike da Ƙararrawa button, danna SAA button repeatedly to set the desired alarm hour. Observe the PM indicator.
- Duk da yake har yanzu rike da Ƙararrawa button, danna MIN button repeatedly to set the desired alarm minute.
- Saki da Ƙararrawa button. The alarm time is now set.
6.2. Activating/Deactivating the Alarm
- To activate the alarm, slide the RANAR ALMAR / KASHE switch (located on the side) to the "ON" position. The ALARM indicator on the display will light up.
- To deactivate the alarm, slide the RANAR ALMAR / KASHE switch to the "OFF" position. The ALARM indicator will turn off.
6.3. Amfani da Aikin Snooze
Lokacin da ƙararrawa tayi sauti, danna babban GYARA/DIMMER button on top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes.
6.4. Adjusting Display Brightness (Dimmer)
Danna maɓallin GYARA/DIMMER button (when the alarm is not sounding) to cycle through different brightness levels (High, Low, Off) for the LED display.
6.5. Daidaita ƙararrawar ƙararrawa
zamewa da MAI ƘARFI/LAUSHI switch (located on the side) to select your preferred alarm volume level.
7. Kulawa
- Tsaftacewa: Shafa naúrar da laushi, bushe bushe. Kada a yi amfani da masu tsabtace abrasive ko kaushi.
- Madadin Baturi: Maye gurbin batura a kowace shekara ko lokacin da nuni ya nuna alamun dimming yayin wutar lantarkitage.
- Ajiya: If storing the clock for an extended period, remove the backup batteries to prevent leakage.
8. Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Allon agogo a kashe yake. | Babu iko ko iko kutage. | Ensure power adapter is securely plugged in. Check household power. If using battery backup, ensure batteries are fresh and correctly inserted. |
| Ƙararrawa baya yin sauti. | Ƙararrawa ba ta kunna ba ko kuma ƙarar ta yi ƙasa sosai. | Check if the ALARM ON/OFF switch is in the "ON" position. Verify the ALARM indicator is lit. Adjust the LOUD/SOFT switch to a higher volume. |
| Time/Alarm cannot be set. | Buttons not pressed correctly. | Ensure you are pressing and holding the TIME or ALARM button while adjusting hours/minutes. Refer to sections 5.2 and 6.1. |
| Nuni yana da haske/rasa sosai. | Saitin Dimmer yana buƙatar daidaitawa. | Press the SNOOZE/DIMMER button (when alarm is not sounding) to cycle through brightness levels. |
9. Ƙayyadaddun bayanai
- Samfura: SPC106X
- Alamar: Kaifi
- Launi: Baki
- Nau'in Nuni: Dijital LED
- Nuni Launi: Blue
- Girman Nuni: 1.0 inci
- Siffofin Musamman: Alarm, Snooze, Dimmer
- Girman samfur: 2.2"W x 3.9"H (Note: The provided dimensions are for width and height, depth is not specified but implied by the compact design)
- Tushen wutar lantarki: Electrical Operation (AC powered)
- Ajiyayyen Baturi: Ee (Ba a haɗa batura)
- Nau'in Daki: Bedroom
- Nau'in hawa: Tabletop
- Material Frame: Filastik
- Nauyin Abu: 9.6 oz
- Mai ƙira: MZ Berger
- UPC: 049353612447
10. Garanti da Tallafawa
Garanti mai iyaka
MZ Berger & Company warrants to the original consumer purchaser of this product that it shall be free of defects in material and workmanship for one year from the purchase date. This warranty does not cover damage resulting from tampering, improper use, unauthorized modification, or misuse. This warranty is limited to repair or replacement of the product at MZ Berger's discretion.
To obtain warranty service, you must include a Proof of Purchase (sales receipt or photocopy) and a check or money order for USD $5.00 to cover the cost of handling. Also include your return address and a brief description of the issue. Ship the clock, postage wanda aka riga aka biya, zuwa adireshin da ke ƙasa:
Cibiyar Sabis ta MZ Berger
29-76 Arewa Boulevard
Long Island City, NY 11101
Sabis na Abokin Ciniki
Please call Toll Free at 1-(800)-221-0131 for customer service assistance. Available Monday-Friday, 9:00 AM - 4:00 PM EST.
Please do not return the clock to the store without first contacting customer service.
