Jagorar Mai Amfani da Hasken Kai na Cameo CLP64RGB10BS LED PAR

1. Gabatarwa

Thank you for choosing the Cameo Light CLP64RGB10BS LED PAR Headlight. This device is designed for professional lighting applications, offering vibrant RGB color mixing and flexible control options. This manual provides essential information for safe and efficient operation, setup, and maintenance of your PAR headlight.

2. Umarnin Tsaro

• Read this manual completely before operating the device.
• Ajiye wannan littafin don tunani na gaba.
• Koyaushe haɗa na'urar zuwa tashar wutar lantarki ta ƙasa.
• Kada a bijirar da na'urar ga ruwan sama ko danshi.
• Tabbatar da isasshen iska a kusa da naúrar don hana zafi fiye da kima.
• Guji bayyanar ido kai tsaye zuwa tushen haske.
• Cire haɗin wutar lantarki kafin tsaftacewa ko gyara.
• ƙwararrun ma'aikata ne kawai su yi gyare-gyare.

3. Abubuwan Kunshin

Tabbatar cewa duk abubuwa suna nan yayin cire kaya:

• Cameo Light CLP64RGB10BS LED PAR Headlight
• Mounting Brackets (2 strokes)
• Manual Umarni (wannan takarda)
• Wutar Wuta

4. Samfurin Ya Ƙareview

The Cameo Light CLP64RGB10BS features 183 ultra-bright 10mm LEDs (60 red, 60 green, 63 blue) housed in a durable black casing. It includes a control panel for mode selection and DMX connectivity.

Hoto na 4.1: Gaba view of the Cameo Light CLP64RGB10BS LED PAR Headlight, showing the LED array and included power cable.

Hoto na 4.2: Gede view of the PAR headlight, illustrating its compact design and ventilation slots.

Hoto na 4.3: Na baya view showing the control panel with LED display, mode buttons, DMX IN, and DMX OUT ports.

Hoto na 4.4: Dalla-dalla view of the 10mm LED array, highlighting the individual red, green, and blue diodes.

5. Saita

5.1 Haɗawa

The CLP64RGB10BS comes with two mounting brackets for versatile installation. These brackets can be used to stand the unit on a flat surface or to attach it to a truss or lighting stand using appropriate clamps (not included). Ensure the mounting surface or structure can safely support the weight of the fixture.

5.2 Haɗin Wuta

Connect the supplied power cable to the power input on the rear of the unit and then to a standard grounded electrical outlet. The device operates on standard AC power.

5.3 Haɗin DMX (Zaɓi ne)

For DMX control, connect a DMX controller to the DMX IN port using a 3-pin DMX cable. If linking multiple units, connect the DMX OUT of the first unit to the DMX IN of the next, and so on. Terminate the last unit in the chain with a DMX terminator if experiencing signal issues.

6. Aiki

6.1 Control Panel

The control panel on the rear of the unit (refer to Figure 4.3) features an LED display and three buttons: MODE, UP, and DOWN. These buttons are used to navigate menus and adjust settings.

• kwatance: Cycles through the main menu options and confirms selections.
• Sama: Yana ƙara ƙima ko kuma yana ƙaruwa ta cikin zaɓuɓɓukan menu.
• KASA: Yana rage ƙima ko kuma yana motsawa ƙasa ta cikin zaɓuɓɓukan menu.

6.2 Hanyoyin Aiki

The CLP64RGB10BS supports several operating modes:

• Yanayin DMX: Allows external control via a DMX controller. The unit can be set to 4 or 6 DMX channels.
• Yanayin Jagora/Bawa: One unit acts as the master, controlling other slave units. Connect DMX OUT of the master to DMX IN of the first slave, and so on.
• Yanayin tsaye: The unit operates independently using pre-programmed settings or sound-activated programs.

6.3 Yanayin Tashoshi na DMX

The device offers two DMX channel configurations:

• Yanayin Tashar 4: Typically controls Red, Green, Blue intensity, and Master Dimmer/Strobe.
• Yanayin Tashar 6: Provides more granular control, often including Red, Green, Blue intensity, Master Dimmer, Strobe, and Color Macros or other effects.

Refer to the DMX occupation diagram printed on the unit (Figure 4.3) for pin assignments: 1: Ground, 2: Signal (-), 3: Signal (+).

6.4 Sound-to-Light Functionality

In Standalone mode, the unit can react to music via its built-in microphone. Use the control panel to select sound-activated programs and adjust sensitivity if available.

7. Kulawa

7.1 Tsaftacewa

Regular cleaning helps maintain optimal light output and extends the lifespan of the unit. Disconnect power before cleaning.

• Use a soft, lint-free cloth to wipe the exterior casing.
• For the LED lens, use a soft cloth lightly dampened with a mild glass cleaner. Avoid harsh chemicals.
• Tabbatar cewa buɗewar samun iska ba ta da kura da tarkace.

7.2 Adana

When not in use, store the PAR headlight in a dry, dust-free environment, preferably in its original packaging or a protective case.

8. Shirya matsala

9. Ƙayyadaddun bayanai

10. Garanti da Tallafawa

Cameo products are designed for reliability and performance. For information regarding warranty terms and conditions, please refer to the warranty card included with your purchase or visit the official Cameo website. For technical support, service, or spare parts, please contact your local dealer or the Cameo customer service department.

Da fatan za a riƙe shaidar siyan ku don kowane da'awar garanti.