Littafin Mai Amfani da Mai Tsarkake Ruwa na KENT Super Plus RO

1. Gabatarwa

The KENT Super Plus RO Water Purifier is designed to provide 100% pure and safe drinking water through its advanced multiple purification process. This system combines RO (Reverse Osmosis), UF (Ultra Filtration), and TDS (Total Dissolved Solids) Control to remove dissolved impurities such as arsenic, rust, pesticides, and fluorides, while also eliminating bacteria and viruses. The integrated TDS control system allows for adjustment of the purified water's TDS level, ensuring essential natural minerals are retained for healthier drinking water.

Image: KENT Super Plus RO Water Purifier, showcasinƙirar sa mai kyau da kayan ciki.

2. Umarnin Tsaro

Da fatan za a karanta duk umarnin aminci a hankali kafin aiki da na'urar don hana rauni ko lalacewa. Ajiye wannan littafin don tunani na gaba.

• Ensure the power supply matches the specifications listed on the product label.
• Kada a nutsar da na'urar, igiya, ko toshe cikin ruwa ko wasu ruwaye.
• Unplug the purifier from the power outlet when not in use, before cleaning, or during maintenance.
• Kada a yi amfani da na'urar da igiya ko filogi da ta lalace, ko kuma idan an jefar ko ta lalace ta kowace hanya.
• Nisantar yara daga na'urar yayin aiki.
• Install the purifier in a location away from direct sunlight, heat sources, and corrosive chemicals.
• Tabbatar da samun iska mai kyau a kusa da naúrar.
• Only use genuine KENT spare parts for replacement to ensure optimal performance and safety.

3. Abubuwan Kunshin

Bayan cire kaya, da fatan za a tabbatar cewa duk abubuwan da aka jera a ƙasa suna nan kuma ba su lalace ba:

• Main Unit (KENT Super Plus RO Water Purifier)
• Katin Garanti
• Jagorar mai amfani (wannan takaddar)

Note: A pre-filter is not included with this package and may need to be purchased separately depending on your water source quality.

4. Saita da Shigarwa

The KENT Super Plus RO Water Purifier is designed for wall-mounted installation. Professional installation is recommended to ensure proper functioning and adherence to safety standards.

4.1 Zaɓin Yanar Gizo

• Choose a flat, stable wall surface near a water supply and a power outlet.
• Ensure adequate space around the unit for maintenance and air circulation.
• Avoid direct sunlight or areas prone to extreme temperatures.

4.2 Matakan Shigarwa (Kasaview)

1. Mark the drilling points on the wall using the provided template (if applicable).
2. Haɗa ramuka kuma saka matosai na bango.
3. Mount the purifier securely on the wall.
4. Connect the raw water inlet pipe to the water supply.
5. Connect the purified water outlet pipe to the dispenser tap.
6. Connect the reject water pipe to a drain.
7. Tabbatar cewa duk hanyoyin haɗin suna amintacce kuma ba su da ruwa.
8. Toshe igiyar wutar lantarki cikin madaidaicin tashar lantarki.

Image: Diagram illustrating the multi-stage purification process including Sediment Filter, Carbon Filter, RO Membrane, TDS Controller, UF Membrane, and Post Carbon Filter, leading to 100% Pure Water.

5. Umarnin Aiki

Once installed and connected, the KENT Super Plus RO Water Purifier operates largely automatically.

5.1 Farko na Farko

1. Turn on the raw water supply.
2. Plug in the power cord. The purifier will begin the purification process.
3. Allow the storage tank to fill completely. The purification process will stop automatically once the tank is full.
4. For the first use, discard the first two full tanks of purified water to flush out any manufacturing residues.

5.2 Rarraba Ruwa

• Place a clean container under the dispenser tap.
• Turn the tap handle to dispense purified water.
• The purifier will automatically start purifying water again as the water level in the storage tank drops.

5.3 Alamar Matsayin Ruwa

The purifier features a water level indicator on the front panel, allowing you to easily monitor the amount of purified water available in the 8-liter storage tank.

The purification capacity of this unit is approximately 15 liters per hour, depending on the input water pressure and TDS levels.

6. Kulawa

Regular maintenance is crucial for the optimal performance and longevity of your KENT Super Plus RO Water Purifier.

6.1 Sauyawa Tace

The purification system relies on various filters and membranes. The lifespan of these components depends on the quality of the input water and usage volume. It is recommended to replace filters and membranes periodically as advised by KENT service personnel or when the water flow rate significantly decreases or taste changes.

• Sediment Filter & Carbon Filter: Typically replaced every 6-12 months.
• RO Membrane & UF Membrane: Typically replaced every 1-2 years, or as needed.
• Tace Carbon Post: Typically replaced every 6-12 months.

Always use genuine KENT replacement parts. Contact authorized service centers for filter replacement.

6.2 Tsabtace Sashen

• Unplug the purifier before cleaning.
• Shafe wajen naúrar da taushi, damp zane. Kada a yi amfani da masu tsabtace abrasive ko sauran ƙarfi.
• Clean the storage tank periodically by draining and rinsing it.

7. Shirya matsala

If you encounter any issues with your KENT Super Plus RO Water Purifier, refer to the common problems and solutions below. If the problem persists, contact KENT customer support.

8. Ƙayyadaddun bayanai

9. Garanti da Tallafawa

Your KENT Super Plus RO Water Purifier comes with a comprehensive warranty and support package:

• Garanti: 1 year warranty from the date of purchase.
• Tsawaita Sabis: 3 years extended service free (Terms and Conditions apply).

For any service requests, technical assistance, or to inquire about terms and conditions for extended service, please contact KENT customer support. Ensure you have your product model number (AN_51246) and purchase details ready when contacting support.

For more information, you may visit the official KENT Store on Amazon.