SHARP Air Conditioner Remote Control A419JB Instruction Manual

1. Gabatarwa

This instruction manual provides detailed information on the proper use, setup, and maintenance of your SHARP Air Conditioner Remote Control, model A419JB. Please read this manual thoroughly before using the remote control to ensure optimal performance and safety.

2. Bayanin Tsaro

Observe the following safety precautions to prevent damage to the remote control or injury to yourself.

• Shigar da Baturi: Insert two AAA (R03) batteries correctly, observing the polarity (+/-) markings.
• Battery Mixing: Do not mix old and new batteries, or different types of batteries (e.g., alkaline and manganese).
• Adana Na Dogon Lokaci: Cire batirin idan ba za a yi amfani da na'urar sarrafawa ta nesa ba na tsawon lokaci don hana zubewa.
• Tsaron Yara: Keep removed batteries out of reach of children.
• Madadin Baturi: Replace batteries when they are depleted or the remote control's performance degrades.
• Fitar Batir: In case of battery leakage, immediately wipe off any fluid and replace with new batteries. Avoid contact with skin and eyes.
• zubar: Do not put batteries into fire, disassemble, short-circuit, recharge, heat, or get them wet. Dispose of used batteries according to local regulations.
• Lalacewar Jiki: Do not drop the remote control or subject it to strong impacts. Do not modify the remote control.
• Ciki: Do not swallow batteries. If batteries are accidentally swallowed, seek immediate medical attention.

3. Samfurin Ya Ƙareview

The SHARP A419JB remote control features a clear LCD display and intuitively arranged buttons for easy operation of your air conditioner. Below is an overview of the remote's components and their functions.

Hoto 3.1: Gaba view of the SHARP A419JB remote control, showing the LCD display and all control buttons. The display shows temperature settings and operational status. The central button is for power on/off, surrounded by various function buttons.

3.1. Ayyukan Button

• 運転 (Operation/Run): Initiates or stops the air conditioner operation.
• 運転/停止 (Operation/Stop): The central button used to turn the air conditioner ON or OFF.
• 温度設定 (Temperature Setting) ▲/▼: Yana daidaita zafin da ake so sama ko ƙasa.
• 風量 (Fan Speed): Cycles through various fan speed settings (e.g., Low, Medium, High, Auto).
• 運転切換 (Operation Mode Change): Selects the operating mode (e.g., Auto, Cool, Dry, Heat, Fan).
• 風向 (Airflow Direction): Adjusts the direction of the airflow.
• タイマー (Timer): Activates or adjusts the on/off timer functions.
• 1時間切 (1 Hour Off Timer): Sets the air conditioner to turn off after one hour.
• 取消 (Cancel): Cancels the current timer setting or other selected functions.
• ひかえめ (Economical): Yana kunna yanayin ceton kuzari.
• 1/f 省エネ (1/f Energy Saving): Engages a specific energy-saving mode, possibly related to natural airflow patterns.
• フルパワー (Full Power): Yana kunna yanayin aiki mai ƙarfi don sanyaya ko dumama cikin sauri.

3.2. LCD Nuni

The LCD display shows the current settings and operational status, including:

• Saita Zazzabi
• Operating Mode (e.g., Cool, Heat, Dry, Fan, Auto)
• Fan Speed
• Timer Status (e.g., "時間後" - after X hours)
• Battery Indicator (if applicable)

4. Saita

4.1. Shigar da Baturi

The remote control requires two AAA (R03) batteries (not included).

1. Nemo murfin sashin baturi a bayan ramut.
2. Zamar da murfin zuwa ƙasa don buɗe ɗakin.
3. Insert two new AAA batteries, ensuring the positive (+) and negative (-) terminals align with the markings inside the compartment.
4. Zamar da murfin ɓangaren baturin baya zuwa wurin har sai ya danna amintacce.

Hoto 4.1: The open battery compartment of the SHARP A419JB remote control, showing the slots for two AAA batteries and the polarity markings.

Hoto 4.2: Baya view of the SHARP A419JB remote control, showing the battery compartment cover and a wall-mount hook.

5. Umarnin Aiki

Point the remote control directly at the air conditioner's receiver when operating.

5.1. Kunnawa / Kashewa

Danna tsakiya 運転/停止 (Aiki / Tsaida) button to turn the air conditioner ON or OFF.

5.2. Daidaita Zazzabi

Danna maɓallin 温度設定 (Temperature Setting) ▲ button don ƙara yawan zafin jiki ko ▼ button to decrease it. The set temperature will be displayed on the LCD.

5.3. Changing Operation Mode

Danna maɓallin 運転切換 (Operation Mode Change) button repeatedly to cycle through available modes such as Cool, Dry, Heat, Fan, and Auto. The selected mode will appear on the display.

5.4. Adjusting Fan Speed

Danna maɓallin 風量 (Fan Speed) button to cycle through different fan speed settings (e.g., Auto, Low, Medium, High). The current fan speed setting will be indicated on the display.

5.5. Setting Airflow Direction

Danna maɓallin 風向 (Airflow Direction) button to adjust the louver position or activate the swing function, directing the airflow as desired.

5.6. Using Timer Functions

• 1時間切 (1 Hour Off Timer): Press this button to set the air conditioner to turn off automatically after one hour.
• タイマー (Timer): Use this button to access more advanced timer settings, such as setting specific ON or OFF times. Refer to your air conditioner's main unit manual for detailed timer programming.
• 取消 (Cancel): Press this button to cancel any active timer setting.

5.7. Ayyuka na Musamman

• ひかえめ (Economical): Activates an energy-saving operation mode, which may slightly adjust temperature or fan speed to reduce power consumption.
• 1/f 省エネ (1/f Energy Saving): Engages a specific energy-saving mode, often designed to provide a more natural and comfortable airflow while conserving energy.
• フルパワー (Full Power): Initiates a powerful operation for rapid cooling or heating. This mode typically runs the unit at maximum capacity for a set period.

6. Kulawa

6.1. Tsaftace Ikon Nesa

To clean the remote control, wipe it gently with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the surface or internal components.

6.2. Madadin Baturi

Replace the batteries when the display becomes dim, or the remote control's range decreases. Follow the battery installation steps outlined in Section 4.1. Always replace both batteries simultaneously with new ones of the same type.

7. Shirya matsala

If the problem persists after trying these solutions, please contact SHARP customer support or a qualified service technician.

8. Ƙayyadaddun bayanai

• Samfura: SHARP A419JB
• Nau'in Samfur: Ikon nesa na kwandishan
• Tushen wutar lantarki: 2 x AAA (R03) batteries (not included)
• Girma: Approximately 14.4 cm (L) x 7.6 cm (W) x 2.4 cm (D)
• Nauyi: Kusan 100 g (ba tare da batura ba)
• Nisan Aiki: Up to 7 meters (23 feet) under optimal conditions

9. Garanti da Tallafawa

For warranty information, please refer to the documentation provided with your original air conditioner unit or contact SHARP customer service directly. This remote control is designed as a replacement or supplementary unit for compatible SHARP air conditioners.

For further assistance or technical support, please visit the official SHARP website or contact their customer service department in your region. Keep your product model number (A419JB) handy when seeking support.