LASERLINER MultiFinder Plus - Littafin Mai Amfani da Mai Ganowa na Duniya

1. Gabatarwa

The LASERLINER MultiFinder Plus is a highly versatile and reliable locating device designed for detecting various materials within walls, ceilings, and floors. Equipped with multiple integrated sensors, it provides precise detection of wood, metal (including copper, steel, and iron), and live electrical wires. Its user-friendly LCD screen and automatic calibration feature ensure easy and safe operation for both professionals and DIY enthusiasts.

This manual provides comprehensive instructions for the safe and effective use, maintenance, and troubleshooting of your MultiFinder Plus. Please read it thoroughly before operating the device.

2. Bayanin Tsaro

WARNING: Always exercise extreme caution when detecting near electrical installations. The device indicates live wires, but it is crucial to verify findings with other methods if there is any doubt. Disconnect power before drilling or cutting into walls.

• Karanta duk umarnin kafin amfani.
• Kada a bijirar da na'urar zuwa matsanancin zafi, zafi, ko hasken rana kai tsaye.
• Use only the specified battery type (9V alkaline battery, Type 6LR 61).
• Tsaftace na'urar kuma a bushe.
• Do not attempt to open or modify the device. Repairs should only be performed by authorized personnel.
• Be aware of potential hazards such as gas pipes, water pipes, and electrical cables.

Image: The display shows a permanent electrical warning symbol (lightning bolt in triangle) when live wires are detected, indicating a potential hazard.

Image: A red warning light illuminates on the top of the device, accompanied by a lightning bolt symbol on the display, to alert the user to the presence of live electrical current.

3. Abubuwan Kunshin

• LASERLINER MultiFinder Plus device
• 1 x 9V alkaline battery (Type 6LR 61)
• Jagorar mai amfani (wannan takaddar)

4. Samfurin Ya Ƙareview

Familiarize yourself with the components of your MultiFinder Plus:

Hoto: Gaba view of the MultiFinder Plus, showing the LCD display, Mode button, and CAL button.

• Nuni LCD: Shows detection mode, signal strength, battery status, and warning indicators.
• Maɓallin Yanayin: Used to switch between detection modes (Wood/Stud, Metal, AC).
• Maɓallin CAL: Used for automatic calibration.
• Yankin Firikwensin Ganowa: Located on the back of the device, this area must be placed flat against the surface for accurate readings.
• Dakin Baturi: Ana zaune a baya don shigar da batir.
• Hasken Gargaɗi: A red LED on the top of the device illuminates when live electrical wires are detected.

Hoto: Rufewa view of the orange 'Mode' button and the black 'CAL' (Calibration) button, indicating simple, one-touch operation.

Image: The LCD display provides clear information, including 'MOVE' arrows to guide the user during scanning, indicating the direction to move for optimal detection.

Image: The MultiFinder Plus features a backlight on its display, ensuring readability in low-light conditions.

5. Saita

5.1. Shigar da Baturi

The MultiFinder Plus requires one 9V alkaline battery (Type 6LR 61).

1. Nemo murfin sashin baturi a bayan na'urar.
2. Zamewar murfin a buɗe.
3. Insert the 9V battery, ensuring correct polarity (+ and -).
4. Rufe murfin ɗakin baturi amintacce.

Image: The open battery compartment of the MultiFinder Plus, showing the correct placement of a 9V battery. The battery cover is shown detached.

Image: The MultiFinder Plus device displayed alongside a 9V battery, illustrating the required power source.

5.2. Daidaitawar farko

Before each use, or when switching detection modes, it is recommended to perform an automatic calibration.

1. Place the device flat against the surface you intend to scan, ensuring no objects are directly beneath it.
2. Latsa ka riƙe CAL button until the calibration process is complete (indicated on the LCD).
3. The device is now ready for use in the selected mode.

6. Umarnin Aiki

6.1. Kunnawa Kashewa da Zaɓin Yanayin

Don kunna na'urar, danna maɓallin Yanayin button. To switch between detection modes (Wood/Stud, Metal, AC), press the Yanayin button repeatedly until the desired mode is displayed on the LCD.

6.2. Detection Modes and Depths

The MultiFinder Plus offers three primary detection modes:

• Stud-Scan (Wood): Detects wooden studs and beams.
  • Detection Depth: Approximately 2 cm to 4 cm.
• Metal-Scan: Detects ferrous and non-ferrous metals, including copper, steel, and iron. This mode can also detect non-live cables under plaster.
  • Detection Depth: Up to 10 cm.
• AC-Scan: Detects live electrical wires (110V-230V).
  • Detection Depth: Approximately 4 cm to 5 cm.

Image: A visual diagram illustrating the approximate detection depths for different scan modes: Stud-Scan (2-4 cm), AC-Scan (4-5 cm for 110-230 Volt wires), and Metal-Scan (up to 10 cm).

6.3. Scanning Procedure

1. Select the appropriate detection mode using the Yanayin maballin.
2. Perform automatic calibration by pressing the CAL button while the device is flat against the surface.
3. Slowly move the device horizontally across the surface. Maintain constant contact and pressure.
4. Observe the LCD display for signal strength indicators and the 'MOVE' arrows, which guide you towards the center of the detected object.
5. When an object is detected, the device will emit an acoustic signal, and the optical display will show a strong signal. For live wires, the red warning light will also illuminate.
6. Mark the location of the detected object. For precise localization, scan the area from multiple directions.

6.4. Acoustic and Optical Signals

The MultiFinder Plus provides clear feedback:

• Acoustic Signal: A beeping sound indicates the presence of a detected object. The frequency or intensity may change as you get closer to the object.
• Nuni na gani: The LCD screen shows a bar graph indicating signal strength. The higher the bars, the closer you are to the object.
• Jan Hasken Gargaɗi: Illuminates when live electrical wires are detected, providing an immediate visual alert.

7. Kulawa da Kulawa

• Tsaftacewa: Goge na'urar da taushi, damp zane. Kada a yi amfani da masu tsabtace abrasive ko sauran ƙarfi.
• Ajiya: Store the device in a dry, dust-free environment, away from direct sunlight and extreme temperatures (-20 °C to 70 °C).
• Baturi: Cire batirin idan ba za a yi amfani da na'urar na tsawon lokaci ba don hana zubewa.
• Daidaitawa: Regular calibration ensures optimal performance.

8. Shirya matsala

9. Ƙayyadaddun bayanai

10. Garanti da Tallafawa

Laserliner products are manufactured with high quality standards and undergo strict quality control. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit the official Laserliner website don cikakken garanti sharuɗɗa da sharuɗɗa.

For technical support, service, or spare parts, please contact your local Laserliner distributor or the customer service department. Contact information can typically be found on the Laserliner website ko a kan marufin samfurin ku.

Da fatan za a riƙe shaidar siyan ku don da'awar garanti.