SEIKO NR434M

Seiko NR434M Pyxis Analog Alarm Clock User Manual

Model: NR434M

Gabatarwa

Thank you for choosing the Seiko NR434M Pyxis Analog Alarm Clock. This clock is designed to provide a pleasant waking experience with its natural bird sounds and clear analog display. Please read this manual carefully to ensure proper setup and operation of your new alarm clock.

Bayanin Tsaro

  • Kada a fallasa agogon ga yanayin zafi mai tsanani, hasken rana kai tsaye, ko kuma yawan danshi.
  • A guji rage gudu ko kuma sanya shi cikin mawuyacin hali.
  • Use only the specified battery type (AA alkaline batteries x 3).
  • Cire batura idan agogon ba zai yi amfani da shi na tsawon lokaci ba don hana zubewa.
  • Zubar da batura masu amfani bisa ga ƙa'idodin gida.

Abubuwan Kunshin

  • Seiko NR434M Pyxis Analog Alarm Clock Unit
  • AA Alkaline Batirin (x3)

Samfurin Ƙarsheview

The Seiko NR434M features a house-shaped design with an analog clock face and a chimney-like button on top. The back of the clock houses all control dials and switches for setting time, alarm, volume, and alarm sound type.

Gaba view of the Seiko NR434M Pyxis Analog Alarm Clock

Hoto: Gaba view of the Seiko NR434M Pyxis Analog Alarm Clock, showing the green house-shaped casing and the white analog clock face with black numbers.

Saita

1. Shigar da Baturi

  1. Nemo murfin ɗakin baturi a bayan agogo.
  2. Zame murfin ƙasa don buɗewa.
  3. Insert three (3) AA alkaline batteries, ensuring correct polarity (+/-).
  4. Sauya murfin ɗakin baturi, zamewa sama har sai ya danna wurin.

2. Kafa Lokaci

  1. On the back of the clock, locate the "TIME" knob.
  2. Rotate the "TIME" knob in either direction to move the hour and minute hands to the current time.

3. Kafa theararrawa

  1. On the back of the clock, locate the "ALARM" knob.
  2. Rotate the "ALARM" knob to set the alarm hand to your desired wake-up time.
Baya view of the Seiko NR434M Pyxis Analog Alarm Clock showing controls

Hoto: Baya view of the Seiko NR434M Pyxis Analog Alarm Clock, highlighting the volume control dial, alarm sound selector switch (A/B/Electronic), time setting knob, and alarm setting knob.

Umarnin Aiki

1. Alarm Sound Selection

The clock offers three alarm sound options:

  • Bird A: Features a combination of Cucoon, Lurivitaki, and Komadori bird sounds.
  • Bird B: Features a combination of Sankoo and Oolli Aogi bird sounds.
  • Electronic Sound: A traditional electronic beep alarm.

To select an alarm sound, use the switch labeled "A / B / ((()))" on the back of the clock. Slide the switch to your preferred setting.

2. Sarrafa ƙara

Adjust the alarm volume using the "VOL." dial on the back of the clock. Rotate the dial towards "MAX" for louder volume or "MIN" for softer volume.

3. Activating/Deactivating the Alarm

Use the ON/OFF switch located on the left side of the clock's back panel to activate or deactivate the alarm function.

4. Snooze Function and Illumination

The white chimney-like button on top of the clock serves two functions:

  • Rage wuri: When the alarm sounds, press the chimney button to activate the snooze function. The alarm will pause and sound again after approximately 5 minutes.
  • Haske: Press the chimney button at any time to briefly illuminate the clock face for easy viewcikin duhu.

Kulawa

Tsaftacewa

Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or internal components.

Madadin Baturi

Replace all three AA batteries when the clock's display dims, the alarm sound weakens, or the clock stops functioning. Always replace all batteries at the same time with new ones.

Shirya matsala

  • Clock not working / Alarm not sounding:
    Check if the batteries are inserted correctly and are not depleted. Ensure the alarm ON/OFF switch is in the "ON" position.
  • Alarm sound is too quiet or too loud:
    Adjust the "VOL." dial on the back of the clock to your desired level.
  • Lokaci bai dace ba:
    Ensure the batteries are fresh. Quartz movements are generally accurate, but extreme conditions can affect performance.

Ƙayyadaddun bayanai

Seiko NR434M Pyxis Analog Alarm Clock size comparison with a hand

Image: The Seiko NR434M Pyxis Analog Alarm Clock shown next to a hand for size comparison, indicating its compact dimensions of approximately 4.4 inches (11 cm) in height.

SiffarDaki-daki
Lambar SamfuraNR434M
AlamarSEIKO
LauniKore
Nau'in NuniAnalog
MotsiQuartz (+/- 20 seconds per month)
Girman samfur4.33"H x 3.39"W (11.0 x 8.6 x 6.2 cm)
Nauyin Abu0.5 lbs (0.23 kg / 8.1 ounces)
Kayan abuPlastic frame (green coating), front plastic
Tushen wutar lantarkiAna Karfin Batir
Ana Bukata Batura3 x AA alkaline batteries (included)
Rayuwar BaturiKimanin watanni 10
Siffofin MusammanAlarm, Snooze, Nature Sound (Bird A, Bird B), Electronic Sound, Volume Control, Sweep Hand, Illumination
Ƙasar AsalinChina

Garanti da Taimako

Seiko products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official SEIKO website. Ajiye rasidin siyan ku azaman tabbacin siyan kowane da'awar garanti.