Manhajar Kayan Shigar Iska Mai Daidaita Hygro-Adaidaita ta Aldes EHL 6-45L 39dB

1. Gabatarwa

This manual provides comprehensive instructions for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, model 11014085. This kit is designed to regulate airflow and reduce noise, ensuring optimal indoor air quality. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit, white

Figure 1: Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit. This image shows the compact, rectangular design of the white air inlet unit.

2. Umarnin Tsaro

Always follow basic safety precautions when installing or maintaining this product to reduce the risk of injury or damage.

An Shawarar Shigar Ƙwararru: Installation should ideally be performed by a qualified professional to ensure compliance with local building codes and proper functionality.
Karanta Umarni: Karanta duk umarnin a hankali kafin fara shigarwa.
Saka Kayan Kariya: Use appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
Duba Lalacewar: Before installation, inspect the product for any signs of damage. Do not install damaged components.
Ingantacciyar iska: Ensure adequate ventilation during and after installation.
Ka Tsare Wajen Isar Yara: Wannan samfurin ba abin wasa bane. Ka kiyaye shi daga isar yara.
zubar: Dispose of packaging materials responsibly and according to local regulations.

3. Abubuwan Kunshin

Tabbatar cewa dukkan sassan suna nan kuma ba su lalace ba kafin a ci gaba da shigarwa.

1 x Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Unit
Installation accessories (e.g., mounting screws, seals - may vary by kit version)
Jagorar mai amfani (wannan takaddar)

4. Saita & Shigarwa

This section outlines the general steps for installing the Aldes EHL air inlet. Specific installation details may vary based on the type of wall or window and local building codes. Consult a professional if unsure.

Zaɓi Wuri: Select an appropriate location for the air inlet, typically on an exterior wall or window frame, ensuring it is not obstructed.
Shirya Buɗewa: Create an opening in the wall or window frame according to the dimensions specified in the product's technical data sheet (not provided in this manual, refer to manufacturer's websaiti).
Install Outer Grille (if applicable): Secure the exterior grille to the outside of the opening.
Insert Air Inlet Unit: Carefully insert the Aldes EHL air inlet unit into the prepared opening from the interior side.
Amintaccen Sashe: Use the provided mounting screws to firmly secure the air inlet unit to the wall or window frame. Ensure it is level and sealed properly to prevent air leaks.
Apply Seals: Apply any necessary seals or gaskets to ensure airtightness and acoustic performance.
Ayyukan Gwaji: After installation, verify that the air inlet's hygro-adjustable mechanism moves freely and that airflow is established.

Note: For detailed diagrams and specific mounting instructions, please refer to the technical documentation provided by ALDES or consult their official website.

5. Umarnin Aiki

The Aldes EHL air inlet is a hygro-adjustable device, meaning its airflow capacity automatically adapts based on the humidity level in the room. This ensures optimal ventilation without manual intervention.

Daidaita atomatik: The internal sensor detects changes in ambient humidity. As humidity increases (e.g., during showering or cooking), the air inlet opens further to allow more fresh air in. As humidity decreases, it reduces the airflow.
Ayyukan Acoustic: The "39dB" rating indicates its acoustic attenuation capabilities, designed to reduce external noise transmission while maintaining ventilation.
Babu Ikon Mai Amfani: This unit operates automatically and does not typically feature manual controls for airflow adjustment. Its design is intended for passive, demand-controlled ventilation.

6. Kulawa

Regular maintenance ensures the efficient and long-lasting operation of your Aldes EHL air inlet.

Yawan Tsaftacewa: It is recommended to clean the air inlet at least once a year, or more frequently in dusty environments.
Tsarin Tsaftacewa:
1. Gently remove the front cover of the air inlet.
2. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust and debris from the grille and internal components.
3. Shafa saman waje da tallaamp zane. Kada a yi amfani da masu tsabtace abrasive ko sauran ƙarfi.
4. Ensure the humidity sensor (if visible) is free from dust and obstructions.
5. Sake manne murfin gaba amintacce.
Do Not Obstruct: Ensure that the air inlet is never blocked by furniture, curtains, or other objects, as this will impair its performance.
Dubawa: Bincika naúrar lokaci-lokaci don kowane alamun lalacewa ko lalacewa.

7. Shirya matsala

If you encounter issues with your Aldes EHL air inlet, refer to the following common problems and solutions.

Matsala	Dalili mai yiwuwa	Magani
Rashin isasshen iska	Air inlet or outer grille is obstructed. Dust accumulation on internal components. Humidity sensor is blocked or faulty. Incorrect installation or sealing.	Bincika kuma cire duk wata matsala. Clean the air inlet as described in the Maintenance section. Ensure the humidity sensor is clear. If still faulty, contact support. Verify proper installation and sealing.
Yawan surutu	Loose components or improper sealing. External noise sources. Air inlet operating at maximum flow due to high humidity.	Check mounting screws and seals. Identify and address external noise sources. This is normal operation. Ensure the unit is clean.
Unit Not Adjusting	Humidity sensor is dirty or damaged. Mechanical obstruction of the adjustment mechanism.	Clean the humidity sensor. If still unresponsive, the sensor may be faulty. Inspect for any physical obstructions preventing movement.

If the problem persists after attempting these solutions, please contact Aldes customer support or a qualified technician.

8. Ƙayyadaddun bayanai

Key technical specifications for the Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit.

Lambar Samfura: 11014085 (also AJA50015)
Alamar: ALDES
Nau'in: Hygro-Adjustable Acoustic Air Inlet Kit
Matsakaicin Tafiya: 6 to 45 Liters per second (L/s)
Acoustic Attenuation: 39db ku
Launi: Fari
Siffar: Rectangular
Mai ƙira: ALDES AERAULIQUE
Abubuwan da aka haɗa: 1 Product (Air Inlet Unit)
Batura da ake buƙata: A'a
Rukunin samfur: Performance Part (HVAC, Ducts)
ASIN: B00DCK2EMW

9. Garanti & Tallafi

For warranty information, technical support, or to inquire about spare parts, please contact ALDES directly.

Mai ƙira: ALDES AERAULIQUE
Website: www.aldes.com
Sabis na Abokin Ciniki: Refer to the ALDES webshafin don bayanin tuntuɓar yanki.
Kayan gyara: Information regarding spare parts availability is not provided in the product specifications. Please contact ALDES customer service for details.

	Aldes EHL L 6-44 m³/h - 39 dB - Fari: Kayan Shigar Iska Mai Tsabtace Iska Detailed information on the Aldes EHL L hygrometric air inlet kit, including its technical specifications, acoustic performance, dimensions, and installation guidelines. This kit provides adjustable airflow for residential buildings, ensuring optimal air quality and acoustic comfort.
	Aldes EHL S 6-44 m³/h - 37 dB - Fari: Shigar Iska Mai Daidaita Hygro Cikakkun bayanai game da shigar iska ta Aldes EHL S mai tsafta, wanda ke nuna aikin sauti har zuwa 42 dB, iska mai daidaitawa, da kuma kwararar iska da aka jagoranta a rufi. Ya haɗa da ƙayyadaddun fasaha, girma, da jagororin shigarwa.
	Aldes EHL S 6-44 m³/h - 37 dB Shigar Iska ta Aluminum - Bayanan Fasaha Cikakkun bayanai na fasaha don Aldes EHL S 6-44 m³/h - 37 dB Shigar iska mai tsafta ta aluminum, gami da fasali, girma, bayanan sauti, da jagororin shigarwa.
	Aldes EHL L 6-44 m³/h - 39 dB Anthracite Hygro-Regulated Air Inlet Ƙayyadaddun fasaha da jagorar shigarwa na Aldes EHL L hygro-regulated air inlet, model 11014138, a cikin anthracite. Yana da haɓakar ƙararrawa har zuwa 42 dB da daidaitacce iska daga 6-44 m³/h.
	Aldes EHL S 6-44 m³/h - 37 dB - Shigar Iska Mai Laushi Mai Laushi Technical specifications and installation guide for the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a discreet design. Includes dimensions, accessories, and acoustic data.
	Aldes EHL S 6-44 m³/h - 37 dB - Anthracite: Shigar Iska Mai Tsaftacewa da Hygro Detailed information on the Aldes EHL S hygro-regulated air inlet, featuring acoustic performance up to 42 dB, adjustable airflow based on humidity, and a sleek design. Includes technical specifications, dimensions, and available accessories.

ALDES 11014085

Aldes EHL 6-45L 39dB Acoustic Hygro-Adjustable Air Inlet Kit