Gabatarwa
Thank you for choosing the Casio TQ-362-4ADF Analog Alarm Clock. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Hoto: Gaba view of the Casio TQ-362-4ADF Analog Alarm Clock, featuring a red casing, black dial with green luminous numbers, and silver bells and feet.
Saita
1. Shigar da Baturi
- Open the battery compartment cover located on the back of the alarm clock.
- Insert two (2) AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Rufe murfin ɗakin baturi amintacce.
2. Kafa Lokaci
- Nemo maɓallin saita lokaci a bayan agogo.
- Rotate the knob in either direction to move the hour and minute hands to the current time.
- For best accuracy, set the time slightly ahead and then rotate backward to the exact time.
Umarnin Aiki
1. Setting the Alarm Time
- Nemo maɓallin saita ƙararrawa a bayan agogo.
- Juya wannan maɓalli don motsa ƙaramin hannun ƙararrawa zuwa lokacin ƙararrawa da kake so.
- Tabbatar cewa maɓallin kunnawa/kashewa na ƙararrawa (yawanci ƙaramin lever ko maɓalli) yana cikin matsayin 'ON'.
2. Activating/Deactivating the Alarm
- To activate the alarm, slide the alarm ON/OFF switch to the 'ON' position.
- To deactivate the alarm, slide the alarm ON/OFF switch to the 'OFF' position.
3. Aikin Snooze
- When the alarm sounds, press the snooze button (typically located on the top of the clock).
- The alarm will temporarily stop and sound again after a few minutes (duration may vary by model).
- To fully stop the alarm, slide the alarm ON/OFF switch to the 'OFF' position.
Hoto: Na baya view of the Casio TQ-362-4ADF Analog Alarm Clock, illustrating the time setting knob, alarm setting knob, and alarm ON/OFF switch.
Kulawa
Tsaftacewa
- Wipe the clock with a soft, dry cloth.
- Kada a yi amfani da masu tsaftace goge-goge, masu narkewa, ko feshi na sinadarai, domin suna iya lalata casing ko abubuwan ciki.
Madadin Baturi
- Replace batteries when the clock starts to lose time or the alarm sound weakens.
- Always replace both batteries at the same time with new, identical AA batteries.
- Zubar da batura masu amfani bisa ga ƙa'idodin gida.
Shirya matsala
| Matsala | Magani |
|---|---|
| Clock is not running or losing time. | Check battery installation. Replace with fresh AA batteries. |
| Ƙararrawa baya yin sauti. | Ensure the alarm ON/OFF switch is in the 'ON' position. Verify alarm time is set correctly. Check battery strength. |
| Alarm is too quiet. | Replace batteries with fresh ones. The alarm volume is fixed and cannot be adjusted. |
Ƙayyadaddun bayanai
| Siffar | Daki-daki |
|---|---|
| Lambar Samfura | TQ-362-4ADF |
| Nau'in | Analog Alarm Clock |
| Kayan abu | Resin (Plastic) |
| Launi | Ja |
| Girma (L x W x H) | 6 x 3.81 x 13.6 cm |
| Nauyi | 147.83g ku |
| Ana Bukata Batura | 2 baturi AA |
| Abubuwan da aka haɗa | Battery, strap, operating instructions (Note: 'strap' likely refers to packaging or a small component, not a wearable strap for this type of clock) |
Garanti da Taimako
Casio products are manufactured to high-quality standards. For information regarding warranty coverage, service, or technical support, please refer to the warranty card included with your product or visit the official Casio website. Ajiye rasidin siyan ku azaman tabbacin siyan kowane da'awar garanti.
For further assistance, you may contact Casio customer service through their official channels.
