Gabatarwa
This manual provides essential information for the proper installation, operation, and maintenance of your Infinity Primus PR6510CS 6.5-inch 2-Way Car Component Speakers System. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and safety.
Bayanin Tsaro
- Always disconnect the vehicle's battery negative terminal before beginning any electrical work to prevent short circuits.
- Tabbatar cewa duk wayoyi an kulle su da kyau kuma a kiyaye su don hana lalacewa daga girgiza ko kaifi mai kaifi.
- Do not mount speakers or components in locations that obstruct vehicle operation, airbags, or visibility.
- Use appropriate personal protective equipment, such as safety glasses, during installation.
- Idan ba ka da tabbas game da wani ɓangare na tsarin shigarwa, tuntuɓi ƙwararren mai shigar da sauti na mota.
- Ka guji ɗaukar tsayin daka zuwa matakan girma, wanda zai iya haifar da lalacewar ji.
Abubuwan Kunshin
Tabbatar cewa duk abubuwa suna nan a cikin kunshin ku:
- Two (2) 6.5-inch Woofers
- Two (2) Tweeters
- Two (2) External Crossovers
- Mounting Hardware (screws, clips, grilles, tweeter mounting cups)
- Speaker Wire (may vary by package)
- Manual mai amfani

Image: The Infinity Primus PR6510CS component speaker system, showing a woofer, tweeter, and crossover.
Saita da Shigarwa
Proper installation is crucial for optimal sound quality and system longevity. This section outlines general steps for installing your component speaker system.
1. Tsari da Shirye
- Zaɓin Wuri: Identify suitable mounting locations for the woofers, tweeters, and crossovers in your vehicle. Woofers are typically installed in factory door locations. Tweeters can be flush-mounted, surface-mounted, or angle-mounted in door panels or A-pillars for optimal sound staging. Crossovers should be mounted in a dry, secure location, often inside door panels or under the dashboard.
- Vehicle Disassembly: Carefully remove door panels, trim pieces, or other components necessary to access speaker mounting locations and run wiring.
- Hanyar Wayoyi: Shirya hanyar sadarwa ta wayoyin lasifika daga naka amplifier/head unit to the crossover, and from the crossover to the woofer and tweeter. Avoid routing wires near sharp edges or moving parts.
2. Shigar da Woofer
- Mount the 6.5-inch woofers into the designated speaker openings. Use the provided mounting screws and ensure a secure fit. Adapters or spacers may be required for some vehicle applications.
- Ensure the woofer cone has sufficient clearance and does not contact any part of the door panel or window mechanism.
3. Shigar da Tweeter
- Choose the appropriate tweeter mounting method (flush, surface, or angle) based on your vehicle and desired sound.
- Carefully cut any necessary holes for flush mounting, ensuring the hole size matches the tweeter housing.
- Secure the tweeters using the provided hardware.
4. Crossover Installation and Wiring
- Mount the passive crossovers in a secure, dry location.
- Haɗa wayar lasifikar daga naka amplifier or head unit's output to the "INPUT" terminals on the crossover. Observe correct polarity (+ to + and - to -).
- Connect the woofer to the "WOOFER" or "MID" terminals on the crossover.
- Connect the tweeter to the "TWEETER" or "HIGH" terminals on the crossover.
- Tabbatar cewa dukkan hanyoyin haɗin suna da ƙarfi kuma an rufe su da kyau.
5. Testing and Reassembly
- Before reassembling vehicle panels, temporarily reconnect the battery and test the system at a low volume to ensure all speakers are functioning correctly and polarity is correct.
- Once confirmed, disconnect the battery again, secure all wiring, and reassemble the vehicle's interior components.
Umarnin Aiki
Your Infinity Primus PR6510CS speakers are designed to deliver clear and dynamic audio. Follow these guidelines for optimal operation:
- Gudanar da Wuta: These speakers have a peak power handling of 480 watts per set (240 watts each side) and an RMS power handling of 160 watts per set (80 watts each side). Ensure your ampFitowar lifier ta dace da waɗannan ƙayyadaddun bayanai don hana lalacewa.
- Tashin hankali: The speakers feature a 2.7-ohm impedance. This design allows the speakers to draw maximum power from your amplifier or head unit, resulting in increased output. Ensure your amplifier is stable at this impedance.
- Saitunan Sauti: Adjust your head unit's equalizer and crossover settings to fine-tune the sound. Start with flat settings and make small adjustments to suit your preferences.
- Lokacin ɓata lokaci: Allow a short break-in period (typically 10-20 hours of normal listening) for the speaker components to loosen up and achieve their full sound potential.
Kulawa
Minimal maintenance is required for your speakers:
- Tsaftacewa: Gently wipe speaker grilles and surrounds with a soft, damp zane don cire ƙura da datti. Ka guji yin amfani da sinadarai masu tsauri ko goge goge.
- Dubawa: Periodically check speaker connections and mounting hardware for tightness. Ensure no wires are frayed or exposed.
- Abubuwan Muhalli: Duk da cewa an ƙera shi ne don amfani da mota, a guji fallasa lasifika ga danshi mai yawa ko yanayin zafi mai tsanani fiye da yanayin aiki na mota na yau da kullun.
Shirya matsala
Idan kuna fuskantar matsala da lasifikan ku, duba waɗannan matsalolin da mafita na yau da kullun:
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| No sound from one or more speakers | Loose or disconnected wiring; incorrect crossover connection; amplifier issue; head unit issue. | Check all speaker wire connections at the head unit, amplifier, crossover, woofer, and tweeter. Ensure correct polarity. Verify amplifier and head unit are powered on and functioning. |
| Karkataccen sauti ko rashin tabbas | Overpowering speakers; incorrect gain settings on amplifier; loose speaker mounting; damaged speaker cone; incorrect crossover settings. | Rage ƙara. Duba amplifier gain settings (start low and increase gradually). Ensure speakers are securely mounted. Inspect speaker cones for physical damage. Verify crossover settings on head unit/amplifier are appropriate. |
| Lack of bass or treble | Incorrect crossover wiring; incorrect head unit EQ settings; phase issues. | Double-check crossover connections for woofer and tweeter. Adjust head unit EQ settings. Ensure all speakers are wired with correct polarity. |
Ƙayyadaddun bayanai
Key technical specifications for the Infinity Primus PR6510CS speakers:
- Nau'in Kakakin: 6.5-inch 2-Way Component System
- Gudanar da Wuta (RMS): 80 Watts per speaker (160 Watts per set)
- Gudanar da Wuta (Kololuwa): 240 Watts per speaker (480 Watts per set)
- Tashin hankali: 2.7 ohms
- Martanin Mitar: 53 Hz - 20,000 Hz
- Hankali: 88dB ku
- Top-mount Depth: 2-1/16 inci
- Abun Woofer: Polypropylene
- Fasahar Haɗuwa: Wayoyi (Coaxial)
- Girman samfur: Kimanin inci 6 x 8 x 15 (marufi)
- Nauyin Abu: Kimanin kilo 5
Garanti da Taimako
Your Infinity Primus PR6510CS speakers come with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or contact Infinity customer support.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the authorized Infinity service center or your retailer.





